TABLE_HEADING_MODEL
Image
Item Name
Price
C37250003
1 inch Female Threaded Tap Adaptor The Male Thread Will Mesure 33.6mm This is 1" BSP tap connector. This is an unusual thread and is normally used to connect on to hose carts. Most outdoor bibtaps will have a 3/4" BSP...
£1.05
Add:
KARCHA
Karcher Tap Connector 1" Male Thread - 3/4" Female thread This simple product makes sealing to taps a simple process The 3/4" female thread will thread straight on to a 1/2" Bibtap that will have a 3/4" thread on the...
£3.29
Add:
CAB31A08101
10 Core Low Voltage Control Cable Application A cable for signaling purposes in low voltage installations. The PVC insulation provides a perfect signal transmission for frequencies up to about 100 kHz. The PVC mb outer sheath has...
£3.28
Add:
ECO10000BLK
10,000 Litre Water Tank Height 196.5 cm X Diameter 270 cm A high volume water tank ideal for storing large volumes of water above ground. The capacity is 10 cubic metres. Made from high grade virgin MDPE this is a very good quality tank...
£1,692.20
Add:
ECO1050V1
Slimline Water Tank Depth67cm X Length 150 cm X Height 120cm This is our ultimate slimline water tank. Made from a strong plastic called polyethylene that is weather resistant and frost resistant. To make using our slimline water tank even easier,...
£578.65
Add:
ECO1050V3BLK
Slimline Water Tank Width 120cm X Depth 67 cm X Height 150cm This is our ultimate slimline water tank. Made from a strong plastic called polyethylene that is weather resistant and frost resistant. To make using our slimline water tank even easier,...
£605.47
Add:
Black1050V2
Slimline Water Tank Width120cm X Length 150 cm X Height 67cm This is our ultimate slimline water tank. Made from a strong plastic called polyethylene that is weather resistant and frost resistant. To make using our slimline water tank even easier,...
£591.35
Add:
ECO1000BOW-GRN
The Highway Water Bowser The Chassis is constructed from a fully welded 'T' frame drawbar, all fully hot dipped galvanised. The Water Tank 'D' Shape in section, baffled & moulded from polyethylene & fitted with a vented...
£2,962.41
Add:
ECO1100UBLACK
1100 Litre Water Tank Slimline Height 128 cm x Width 58cm X Length 175 cm The large ribs creates a strong and stable tank. The 1" BSP outlet can be at the same end as the lid. This can be upgraded to 2" if required. As standard this tank...
£647.81
Add:
50S110-63
£107.17
Add:
UNI7126110
£46.78
Add:
UNI7146119
£60.34
Add:
CAB31A08121
12 Core Low Voltage Control Cable Used to connect 24 Volt valves to control units YR Dca PVC Signal Cable Application A cable for signaling purposes in low voltage installations. The PVC insulation provides a perfect...
£3.95
Add:
ECO1275BLK
1275 Litre Pillar Water Tank Height 180cm X Width 111cm x Depth 69.5cm All keen gardeners, whether your a beginner or an experienced gardener, need to collect rainwater in many cases it is better for the plants as tap water can be too hard for...
£698.62
Add:
ECO13000BLK
13,000 Litre Water Tank Height 285.5 cm X Diameter 270 cm A high volume water tank ideal for storing large volumes of water above ground. The capacity is 10 cubic metres. Made from high grade virgin MDPE this is a very good quality tank...
£2,115.60
Add:
ECO1300BLK
1300 Litre Round Water Tank 124cm Height X Diameter 124 cm Ideal for domestic or commercial water storage Suitable for internal or external use Value for money, high capacity water storage Frost proof; will not crack in the cold Opaque...
£421.99
details
CAB31A08141
14 Core Low Voltage Control Cable Used to connect 24 Volt valves to control units YR Dca PVC Signal Cable Application A cable for signaling purposes in low voltage installations. The PVC insulation provides a perfect...
£4.33
details Sold Out
ECO1500BLK
1300 Litre Round Water Tank 136cm Height X Diameter 124 cm Ideal for domestic or commercial water storage Suitable for internal or external use Value for money, high capacity water storage Frost proof; will not crack in the cold Opaque...
£563.13
Add:
ECO15000BLK
15,000 Litre Water Tank Height 290 cm X Diameter 270 cm A high volume water tank ideal for storing large volumes of water above ground. The capacity is 10 cubic metres. Made from high grade virgin MDPE this is a very good quality tank...
£2,539.01
Add:
ECO150BLK
Compact Round Water Tank 150 Litres Height 99cm Diameter 45 cm This is a compact water butt or water tank ideal for small areas. The tank is made from MDPE which is very resistant to UV light and will withstand very cold conditions. The...
£169.35
Add:
C1512F
Brass Connector 15mm Copper Pipe Compression - 1/2" BSP Female thread High quality European made brass pipe connector. Used to convert the end of a copper pipe to a BSP Thread
£5.94
Add:
C1534M
Brass Connector 15mm Copper Pipe Compression - 3/4" BSP Male thread High quality European made brass pipe connector. Used to convert the end of a copper pipe to a BSP Thread
£4.75
Add:
CAB31A08161
16 Core Low Voltage Control Cable Used to connect 24 Volt valves to control units YR Dca PVC Signal Cable Application A cable for signaling purposes in low voltage installations. The PVC insulation provides a perfect...
£5.94
Add:
ECO1600BLK
1600 Litre Water Butt Height 132 cm X Diameter 143 cm Our water tanks are rotational moulded from industrial strength MDPE (Medium Density Polyethylene) using the latest in UV stabilization technologies. The Ecosure 1600 litre water tank comes...
£704.26
details
C31610216
Ball Valve 16mm Barbed - 3/4" BSP Male Thread Made in Europe from industrial grade plastic. A simple ball valve that can be used with 16mm LDPE external diameter pipe or 13mm internal diameter. These sharp barbs hold a secure...
£1.57
Add:
C31571616
Barbed 16mm Ball Valve The barbed ball valve is ideal for restricting flow or turning off the flow to certain parts of the system. The valve can be used in many applications and has a high level of reliability. The barbed ends have...
£1.71
Add:
PAL32701602
16mm barbed Stopend With Drain Cap This 16mm barbed stopend has a removable cap to allow lines to be drained down as required. The cap has an O ring inside which makes sure that once the cap is replaced that the water stays in the...
£1.02
Add:
C31810162
Barbed Tee 16mm x 16mm Branch 3/4" BSP Female Thread Barbed Tee joint 16 mm is suitable for use with LDPE 16mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£1.32
Add:
WP16mm10
16mm Black LDPE Water Pipe (4Bar) A superb light and easy to use black water supply tube suitable for above ground installation. The pipe is thin walled and so suitable for the push fit barbed connectors. 4 Bar pressure Rated Pipe ...
£10.15
Add:
CWP16mm100
16mm Black LDPE Water Pipe (4Bar) A superb light and easy to use black water supply tube suitable for above ground installation. The pipe is thin walled and so suitable for the push fit barbed connectors. 4 Bar pressure Rated Pipe ...
£48.58
Add:
WP16mm25
16mm Black LDPE Water Pipe (4Bar) A superb light and easy to use black water supply tube suitable for above ground installation. The pipe is thin walled and so suitable for the push fit barbed connectors. 4 Bar pressure Rated Pipe ...
£18.60
details Sold Out
WP16mm50
16mm Black LDPE Water Pipe (4Bar) A superb light and easy to use black water supply tube suitable for above ground installation. The pipe is thin walled and so suitable for the push fit barbed connectors. 4 Bar pressure Rated Pipe ...
£25.40
Add:
ECO1850SLBLK
Slimline Water Tank 1850 Litres Capacity Height 174 cm Diameter 125 cm The slimline water tank is made from MDPE which is resistant to UV light and can cope with very cold conditions. The Water tank is fitted with a 16" lid which makes...
£563.13
details
ECO19000BLK
19,000 Litre Water Tank Height 354 cm X Diameter 270 cm A high volume water tank ideal for storing large volumes of water above ground. The capacity is 10 cubic metres. Made from high grade virgin MDPE this is a very good quality tank...
£2,521.20
Add:
ECO1950SL
1900 Litre Water Tank Slimline Design Height 166cm Width 72cm and Length 201cm The 1900 litre SUPER SLIMLINE water tank comes fitted with a 14" vented lid and a 1" or 2" BSP fitting located at the bottom of the tank inline with the...
£1,339.37
details
CAB31A08021
2 Core Low Voltage Cable Application A cable for signaling purposes in low voltage installations. The PVC insulation provides a perfect signal transmission for frequencies up to about 100 kHz. The PVC mb outer sheath has flame retardant...
£1.16
Add:
2TOWS
£140.33
Add:
ECO2000BLK
2000 Litre Water Tank Height 160cm Diamter 143 cm Suitable for internal and external use Ideal for domestic or commercial water storage Value for money, high capacity water storage Frost proof; will not crack in the cold Opaque plastic...
£492.56
details
C31610120
20mm - 1/2" Male BSP Thread Control Valve This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. It is ideal product to use with LDPE as the sharp barb form a permanent...
£1.44
Add:
C31610220
20mm - 3/4" Male BSP Thread Control Valve This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. It is ideal product to use with LDPE as the sharp barb form a permanent...
£1.44
Add:
CWP20mm100
20mm Black LDPE Water Pipe LDPE is a thin walled pipe suitable for above ground or just below ground level installation. If you are installing water pipe underground then you should use an MDPE pipe. The pipe is ideal for...
£60.15
Add:
WP20mm25
20mm Black LDPE Water Pipe LDPE is a thin walled pipe suitable for above ground or just below ground level installation. If you are installing water pipe underground then you should use an MDPE pipe. The pipe is ideal for...
£21.20
details Sold Out
CWP20mm50
20mm Black LDPE Water Pipe LDPE is a thin walled pipe suitable for above ground or just below ground level installation. If you are installing water pipe underground then you should use an MDPE pipe. The pipe is ideal for...
£34.32
Add:
WP20mm1006BAR
20mm Black LDPE Water Pipe 6 Bar Rated LDPE is a thin walled pipe suitable for above ground or just below ground level installation. If you are installing water pipe underground then you should use an MDPE pipe. The pipe is ideal...
£57.19
Add:
Z1409
20mm MDPE Black Underground Water Pipe 10 bar 100 Metre Roll A superb thick walled easy to use black water supply tube suitable for underground installation For use with compression fittings. High pressure rating, 10 bar PE pipe...
£131.90
Add:
C2234F
Brass Connector 22mm Copper Pipe Compression - 3/4" BSP Female thread High quality European made brass pipe connector. Used to convert the end of a copper pipe to a BSP Thread
£6.73
Add:
C2234M
Brass Connector 22mm Copper Pipe Compression - 3/4" BSP Male thread High quality European made brass pipe connector. Used to convert the end of a copper pipe to a BSP Thread
£5.52
Add:
ECO2300BLKLL
2300 Litre Water Tank Height 125cm Diamter 160 cm Suitable for internal and external use Ideal for domestic or commercial water storage Value for money, high capacity water storage Frost proof; will not crack in the cold Opaque plastic...
£774.83
details
PAL32310025
Palapalst 25mm Grip Ring For Nutlock Fittings Used with the 25mm Coupling nuts on 1" BSP Threaded fittings. These convert the ends to a semi compression fitting used with LDPE pipe above or just below the surface
£0.30
Add:
LDPE1155
100 Metres Of LDPE 4 Bar Rated Water Pipe LDPE is an ideal irrigation pipe for surface or just below surface installation. The pipe is light and flexible and ideal for transfer water for larger gardens/ installations reducing the...
£111.75
Add:
ECO25000BLK
25,000 Litre Water Tank Height 448 cm X Diameter 270 cm A high volume water tank ideal for storing large volumes of water above ground. The capacity is 10 cubic metres. Made from high grade virgin MDPE this is a very good quality tank...
£4,375.17
Add:
ECO2500BLK
Large Commercial Water Tank 2500 Litres Height 188cm Diameter 143 cm Made from industrial strength MDPE this superb tank offers all the durability often only found in much more expensive tanks. Made in the UK the tank is rotationally moulded...
£563.13
details
PAL31610225
25mm - 3/4" Male BSP Thread Control Valve This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. It is ideal product to use with LDPE as the sharp barb form a permanent...
£2.06
Add:
ECO260BLK
Compact Round Water Tank 260 Litres Height 90cm Diameter 62 cm This is a compact water butt or water tank ideal for small areas. The tank is made from MDPE which is very resistant to UV light and will withstand very cold conditions. The...
£211.69
Add:
ECO280UBLK
280 Litre Water Tank Rectangular Length 110cm X Height 82cm Width 34cm This is the ecosure Industrial grade 280 litre water tank. The tank is made from industrial grade MDPE in order to support the weight of water stored in the water...
£239.91
Add:
ECO280FBLKV2
280 Litre Water Tank Rectangular Length 110cm X Height 34cm Width82cm This is the ecosure Industrial grade 280 litre water tank. The tank is made from industrial grade MDPE in order to support the weight of water stored in the water...
£239.91
Add:
ECO280UND
280 Litre Underground Water Storage Tank he slim underground water tank is ideal for those that need to store water in a tight space. The 280 litre has two 4" connections ideal for connecting underground pipe work. Made from High Density...
£478.45
Add:
C37250002
Tap Connector Fits Standard Outside Bibtap With 3/4" BSP Thread The click fit connector with thread on to a standard outside Bibtap with a 3/4" BSP thread. Most outdoor taps will have a 3/4" BSP thread on the outlet. If...
£1.00
Add:
TRI19MM5MT
£18.48
Add:
ECO3000BLK
3000 Litres Water Tank 210cm in Height Diameter 142 cm Made from industrial strength MDPE (Medium Density Polyethylene) The 3000 Litre Water Tank. Ideal for both domestic and commercial use. The tank offer a great high value for money above ground...
£774.83
details
LDPE4BAR503220
32mm Black LDPE Water Pipe 100 Metre Length LDPE is a thin walled pipe suitable for above ground or just below ground level installation. If you are installing water pipe underground then you should use an MDPE pipe. The pipe is...
£156.29
Add:
CLDPE6503226
32mm Outside Diameter Low Density Polyethylene Pipe 6 Bar Rated 100 Metre Roll This is a low density polyethylene water pipe with a thicker wall than the standard LDPE pipe. In most cases this is idea to transport water above ground or...
£151.79
Add:
VDL833218W3
32mm PVC Pipe Pre DRilled 3/8" Whitworth Thread at 1.5 Metre Spacings Pipe Length 4.54 Metres The pvc pipe has been pre drilled to take M11 threaded fittings and would normally be used for overhead spray lines
£7.78
details Sold Out
VDL833218M3
32mm PVC Pipe Pre DRilled M11 Thread at 1.5 Metre Spacings Pipe Length 4.54 Metres The pvc pipe has been pre drilled to take M11 threaded fittings and would normally be used for overhead spray lines
£7.78
Add:
VDL833218W4
32mm PVC Pipe Pre Drilled 3/8" WW Thread at 1 Metre Spacings Pipe Length 5.04 Metres The pvc pipe has been pre drilled to take 3/8" Whitworth threaded fittings and would normally be used for overhead spray lines
£8.67
Add:
VDL833218M5
32mm PVC Pipe Pre Drilled M11 Thread at 1 Metre Spacings Pipe Length 5.04 Metres The pvc pipe has been pre drilled to take M11 threaded fittings and would normally be used for overhead spray lines
£8.67
Add:
ECO3900BLK
3900 Litre Water Storage Tank Height 225 cm Diameter 160cm This high volume 3900 litre water storage tank can be used for rainwater harvesting r as a supply tank for some quite large irrigation systems. While the tank is quite imposing it does...
£986.53
details
C31CMDBR-Y
The 3M™ Direct Bury Splice Kits are used to electrically connect two or more pre–stripped copper wires and moisture seal the connection for direct burial. Rated for 600 volts Water Proof and Sunlight Resistant May be installed above or...
£2.83
Add:
CAB31A08041
4 Core Low Voltage Cable Application A cable for signaling purposes in low voltage installations. The PVC insulation provides a perfect signal transmission for frequencies up to about 100 kHz. The PVC mb outer sheath has flame retardant...
£1.24
details Sold Out
ECO400V1BLK
400 Litre Slimline Water Tank Height 100cm Width 34.5 cm Length 124 cm A very durable water tank designed for spaces that normal water butts struggle to fit in to. Made from high quality virgin MDPE polymer this great tanks will not distort or...
£333.06
Add:
ECO400V3BLK
400 Litre Slimline Water Tank Height 124cm Width 34.5 cm Length 100 cm A very durable water tank designed for spaces that normal water butts struggle to fit in to. Made from high quality virgin MDPE polymer this great tanks will not distort or...
£352.82
Add:
ECO400V2BLK
400 Litre Slimline Water Tank Height 34.5cm Width 100 cm Length 124 cm A very durable water tank designed for spaces that normal water butts struggle to fit in to. Made from high quality virgin MDPE polymer this great tanks will not distort or...
£333.06
Add:
UWP40mm40
40mm SportsPro Black Water Pipe 10 Bar Rated Black Water pipe made from MDPE. 3mm wall thickness gives a more open faster flow than the 12.5 bar rated pipe. This 10 bar rated water pipe is suitable for installation above all below...
£134.96
Add:
ECO4500WTLL
4500 Litre Water Storage Tank Height 144cm Diameter 220 cm The 4500 litre water tank comes fitted with a 16" hinged lid and a 1" or 2" BSP fitting located at the bottom of the tank inline with the lid. Also is low in height making...
£1,042.98
details
ECO5000WT
Heavy duty Industrial Grade Water Storage Tank 5000 Litres Height 167 cm Diameter 210 cm This heavy duty reinforced water storage tank is ideal for Agricultural, Horticultural and other Building industrial use that required permanent or temporary...
£1,551.07
details
ECO5100BLK
5000 Litre Light Duty Water Storage Tank Height 160 cm Diameter 205cm This is a lighter duty water storage tank. Lighter duty than the heavy duty and so is more suitable for domestic, nursery or horticultural use. The tank comes with a...
£885.72
details
PLA33720063
ATM Mesh Screen Filter 1" male Threads 0.6 micron screen The ATM mesh screen filter offer an entry level filter that will keep systems clear of grit and dirt protecting valves, drippers and sprayers. The screen is easily...
£9.26
Add:
C33720062
ATM Mesh Screen Filter 3/4" male Threads 0.6 micron screen The ATM mesh screen filter offer an entry level filter that will keep systems clear of grit and dirt protecting valves, drippers and sprayers. The screen is easily...
£10.54
Add:
CVDL806656
PVC 50mm Glue - 2" Flexible Hose End PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry Sanitary...
£4.16
Add:
UWP50mm100
50mm SportsPro Black Water Pipe 10 Bar Rated Black Water pipe made from MDPE. 3mm wall thickness gives a more open faster flow than the 12.5 bar rated pipe. This 10 bar rated water pipe is suitable for installation above all below...
£486.33
Add:
UWP50mm50
50mm SportsPro Black Water Pipe 10 Bar Rated Black Water pipe made from MDPE. 3mm wall thickness gives a more open faster flow than the 12.5 bar rated pipe. This 10 bar rated water pipe is suitable for installation above all below...
£194.24
details Sold Out
50WP125BAR100
Sportspro 12.5 Bar Rated 50 mm Outside Diameter Water Pipe Sportspro 12.5 bar rated water pipe is available in 50 or 100 metre rolls. The pipe is made from MDPE in Netafims factory in Holland. The wall thickness is 4.6mm thick and...
£431.78
Add:
50WP125BAR50
Sportspro 12.5 Bar Rated 50 mm Outside Diameter Water Pipe Sportspro 12.5 bar rated water pipe is available in 50 or 100 metre rolls. The pipe is made from MDPE in Netafims factory in Holland. The wall thickness is 4.6mm thick and...
£269.52
Add:
ECO525BLK
525 Litre Water Butt Height 100cm X Width 84 x Depth 65cm All keen gardeners, whether your a beginner or an experienced gardener, need to collect rainwater in many cases it is better for the plants as tap water can be too hard for some plant, so...
£337.31
Add:
CAB31A08061
6 Core Low Voltage Control Cable Application A cable for signaling purposes in low voltage installations. The PVC insulation provides a perfect signal transmission for frequencies up to about 100 kHz. The PVC mb outer sheath has flame...
£1.92
Add:
ECO6250WT
Standard Duty Water Tank 6250 Litre Capacity Height 165 cm Diameter 220cm This high capacity water tank is ideal for rainwater harvesting or for bulk water storage for irrigation systems in very large gardens, Garden centres, Nurseries or...
£1,268.80
details
UWP63mm10100
SportsPro 10 Bar Black Water Pipe A superb thick walled easy to use black water supply tube suitable for underground installation. For use with compression fittings High pressure rating10 bar MDPE pipe Available in 100 meters Pipe wall thickness...
£567.12
Add:
UWP63mm125100
SportsPro 12.5 Bar Black Water Pipe A superb thick walled easy to use black water supply tube suitable for underground installation. For use with compression fittings High pressure rating10 bar MDPE pipe Available in 50 and 100 meters Pipe wall...
£536.32
Add:
UWP63mm12550
SportsPro 12.5 Bar Black Water Pipe A superb thick walled easy to use black water supply tube suitable for underground installation. For use with compression fittings High pressure rating10 bar MDPE pipe Available in 50 and 100 meters Pipe wall...
£276.21
Add:
ECO650V2BLK
Low Level Water Tank Width 105cm X Length 125 cm X Height 57cm This is our ultimate slimline water tank. Made from a strong plastic called polyethylene that is weather resistant and frost resistant. To make using our slimline water tank even easier,...
£493.96
Add:
ECO650V1BLK
Slimline Water Tank Depth 57cm X Length 125 cm X Height 105cm This is our ultimate slimline water tank. Made from a strong plastic called polyethylene that is weather resistant and frost resistant. To make using our slimline water tank even easier,...
£458.67
Add:
ECO650V3BLK
Slimline Water Tank Depth 57cm X Length 105 cm X Height 125cm This is our ultimate slimline water tank. Made from a strong plastic called polyethylene that is weather resistant and frost resistant. To make using our slimline water tank even easier,...
£493.96
Add:
TC6MMFILT
Tap Connector - 6mm Micro Tube With Filter A threaded adapter 3/4" BSP female thread to 6mm push fit Eindor fitting. This simple unit will thread on to an outside tap, timer or solenoid valve and allow you to connect the 6mm micro...
£2.77
Add:
CPAL10636006
Palaplast Inline Tap Suitable for 6mm O/D PVC flexible Pipe 4mmI/D
£1.05
Add:
ECOD700BLK
700 Litre D Shaped water tank Height 130cm X Width 122cm X Depth 74cm The 700 litre D shaped water tank offers a high capacity of water storage with the added strength of the front D section. made from high grade virgin MDPE this tank will...
£479.84
Add:
ECO7000BLK
Heavy Duty Water Tank 7000 Litres Height 220 cm Diameter 215 cm This industrail grade water tank is a heavy duty reinforced tank that is suitable for garden centres, nurseries, agricultural and building sites This reinforced tank is made from Virgin...
£2,469.85
details
ECO7200
7000 Litre Standard Duty Water tank A high volume water storage tank suitable for agricultural and horticultural use. The tank is an ideal size to cater for most rainwater harvesting systems and will last for many years with a UV and frost...
£1,538.36
Add:
ECO750V1BLACK
750 Litre Slimline Water Tank Length 125cm X Width 60 cm X Height 110 cm An industrial grade water butt with a large 750 litre capacity making this by far one of the most cost effective containers for storing water. The unit is made using high...
£520.79
Add:
ECO750V2BLACK
750 Litre Slimline Water Tank Length 125cm X Width 110 cm X Height 60 cm An industrial grade water butt with a large 750 litre capacity making this by far one of the most cost effective containers for storing water. The unit is made using high...
£534.90
Add:
CAB31A08081
8 Core Low Voltage Control Cable pplication A cable for signaling purposes in low voltage installations. The PVC insulation provides a perfect signal transmission for frequencies up to about 100 kHz. The PVC mb outer sheath has flame retardant...
£2.56
Add:
ECO80BLK
Cubed Water Tank 80 Litres 45 cm square This is a very small water storage tank that can be used inside or out. The unit is made from MDPE and is tapped with a 3/4" female threaded BSP thread at the bottom. The lid is a screw secure...
£98.78
Add:
ECO800BLK
800 Litre Pillar Water Tank Height 180cm X Width 82.5 cm x Depth 63cm All keen gardeners, whether your a beginner or an experienced gardener, need to collect rainwater in many cases it is better for the plants as tap water can be too hard for...
£492.56
Add:
ECO900BLK
900 Litre Round Water Tank Height 100cm X Diameter 125cm The tank is rotational moulded from industrial strength MDPE (Medium Density Polyethylene) using the latest in UV stabilisation technologies. The 900 litre water tank comes fitted with a...
£486.91
details
C37180002
Accessory Adapter 3/4" Male BSP Thread This is a simple to use product and is normally used to fir spray guns or other similar type objects so that they will attach to the standard female click fit connector. The part is made from high...
£1.28
Add:
PAL30910000
Adjustable Dripper 0 - 70 litres per hour This barbed dripper/mini sprinkler has a barbed end which can either be inserted directly in to LDPE pipe or it can be used with a 6mm outside diameter ( 4mm inside diameter ) PVC Flexible...
£0.42
Add:
eOT905500
Palaplast Adjustable Dripper With Spike The Adjustable dripper connects directly to the 6mm pipe with a simple push fit Connection. The top rotates giving an adjustable output from 0 litres up to 40 litres per hour. The dripper...
£0.48
Add:
E905510
Optima Adjustable Dripper On Spike In-Line The optima adjustable in-line dripper is idea for watering tubs baskets pots and troughs. The unit can be used with the endline adjustable dripper. The dripper flow adjustment is simple to...
£0.48
Add:
C60042340
Adjustable Metal Sprinkler Head 850 Litres Per Hour A medium duty sprinkler head with a large throw of 25 metres in diameter if the pressure at the spray haed is 2 bar Metal body Choice of part or full circle Adjustable height and range...
£20.14
Add:
C275025
Brass 1" British Standard Pipe Thread Adjustable Pressure Relief Valve This is a high quality brass pressure relief valve which can be used in high pressure water systems and will make sure that the pressure in the system stays within the...
£65.89
Add:
C275012
Brass Pressure Relief Valve 1/2" Female BSPF Brass pressure relief valve allows low flow zones to operate in a safe way without damaging the pump or the pipe work. One should be fitted per system when using high pressure high flow...
£32.99
Add:
C275040
Brass 11/2" BSPF Adjustable pressure relief valve Brass pressure relief valve allows low flow zones to operate in a safe way without damaging the pump or the pipe work. One should be fitted per system when using high pressure high flow...
£124.19
Add:
C275032
Brass 11/4" BSPF Adjustable pressure relief valve Brass pressure relief valve allows low flow zones to operate in a safe way without damaging the pump or the pipe work. One should be fitted per system when using high pressure high flow...
£87.99
Add:
PRV275050
Adjustable Brass Pressure Relief Valve 2" BSPF Brass pressure relief valve allows low flow zones to operate in a safe way without damaging the pump or the pipe work. One should be fitted per system when using high pressure high flow water...
£132.84
Add:
C275019
Brass Pressure Relief Valve 3/4" Female BSPF Brass pressure relief valve allows low flow zones to operate in a safe way without damaging the pump or the pipe work. One should be fitted per system when using high pressure high flow...
£48.39
Add:
CZ4957
Air Vacuum Relief Valve The Air Vacuum relief valve is used to prevent back flow or syphon effect in irrigation pipes. In some instances this may need fitting to distribution and sprinkler pipes if there is a risk that a syphon could for...
£4.44
Add:
nylonscreen3/4
Amiad Nylon Mesh Screen Filters for 3/4" Thread Made from high quality materials for excellent strength and durability No need for tools when fitting or extracting for rinsing clean Available in screen mesh sizes of 0.8...
£12.93
details
C391010
Amiad 1" Screen Filter 155 Mesh 7000 lph Amiad filter bodies are a strong easy to instal and clean filter. The construction is tough and very strong making this a very durable product for commercial or domestic installation...
£91.79
Add:
C390010
Amiad Filter 3/4" Male Bsp Thread Connectors Suitable for Volumes Up To 3000 Litres Per Hour The Amiad 3/4" screen filter is suitable for use with clean water apllications. The filters are made from stainless steel with a varier=ty...
£43.36
Add:
AMI391210
Amiad 11/2 inch Super Filter Body 11/2" Male BSP Thread Up To 15 Cubic Metres Per Hour 155 mesh filter Amiad filter bodies are a strong easy to instal and clean filter. The construction is tough and very strong making this a very...
£155.36
Add:
C422010
Amiad 2 inch T Filter Body 2" Male BSP Thread Up To 40 Cubic Metres Per Hour Amiad filter bodies are a strong easy to install and clean filter. The construction is tough and very strong making this a very durable product for...
£310.01
Add:
AMI423020
Amiad 3 inch T Filter Body 3" Male BSP Thread Up To 60 Cubic Metres Per Hour Amiad filter bodies are a strong easy to install and clean filter. The construction is tough and very strong making this a very durable product for...
£463.34
Add:
C39T1213
Amiad 11/2" Tagline Filter Ideal for drip irrigation or similar systems with flow rates up to 15000 LPH Suitable to use with clean water supply ie collected rainwater for enclosed above or below tank and screen filter collection Fine...
£93.92
Add:
C39T0013
Amiad Tagline Filter 0.13MM 3/4" Male Thread Ideal for drip irrigation or similar systems with flow rates up to 3000 LPH Suitable to use with clean water supply ie collected rainwater for enclosed above or below tank and screen filter...
£16.47
Add:
C39T1013
Amiad Tagline Filter 1" BSP Thread Ideal for drip irrigation or similar systems with flow rates up to 7000 LPH Suitable to use with clean water supply ie collected rainwater for enclosed above or below tank and screen filter collection...
£16.47
Add:
ATFKFH
Amiad Tagline Inline Hose Pipe Filter Suitable for 1/2" Hose Pipes The Amiad Tagline filter is an ideal unit to place in your hose line that will catch any grit before it gets to your equipment causing damage and blockages. Can be...
£23.53
Add:
Z6435
Amiad Wire Mesh Screen Filter 0.1 mm
£149.71
Add:
wirescreen
Amiad Wire Mesh Screen Filters Made from high quality materials for excellent strength and durability No need for tools when fitting or extracting for rinsing clean Available in screen mesh sizes of 0.8 mm up to 2.0 mm ...
£38.83
details Sold Out
3414/0001
Apollon Lawn Sprinkler with Quick Click Hose Connect Simply click your hose onto the spike and push into the ground. You can place in the centre of a round lawn and adjust to a full circle or it can be adjusted to 90 degrees and placed in a corner....
£10.68
Add:
3415/0021
Apollon Spiked Sprinkler with 3/4 inch Male Thread Add a Geka Female Type Fitting (Z7230) to make it compatable with Geka fittings or a 3/4 inch tap connector to make it compatable with click fit hose fittings. Pressure range: 1.5 - 3 bar...
£10.68
Add:
WM
Water Meters Threaded male tail pieces to allow easy removal Thread size 1/2" Must be installed horizontally Metal body pressure tested to 16 bar Max flow 5000 litres per hour Measurement dial 1L - 10,000 Cubic metres ...
£72.02
Add:
CARA361025
Arad 1" Electronic Pulse Output Water Meter The Arad water Meter with electronic pulse output can be used with watering controls that are able to measure the amount of water used per zone. The meter will emit a pulse every litre of water...
£172.92
Add:
CARA361040
Arad 11/2" Electronic Pulse Output Water Meter The Arad water Meter with electronic pulse output can be used with watering controls that are able to measure the amount of water used per zone. The meter will emit a pulse every litre of...
£319.98
Add:
CARA361032
Arad 11/4" Electronic Pulse Output Water Meter The Arad water Meter with electronic pulse output can be used with watering controls that are able to measure the amount of water used per zone. The meter will emit a pulse every litre of...
£211.86
Add:
CARA361050
Arad 2" Electronic Pulse Output Water Meter The Arad water Meter with electronic pulse output can be used with watering controls that are able to measure the amount of water used per zone. The meter will emit a pulse every litre of water...
£403.64
details Sold Out
CARA361019
Arad 3/4" Electronic Pulse Output Water Meter The Arad water Meter with electronic pulse output can be used with watering controls that are able to measure the amount of water used per zone. The meter will emit a pulse every litre of...
£139.70
Add:
C361985
Arad Water Volume Metering Valve The Arad water volume metering valve is used to allow a pre determined amount of water through the valve prior to it shutting off the water supply. There are two models and you should choose the model...
£73.42
details Sold Out
C361982
Arad Water Volume Metering Valve The Arad water volume metering valve is used to allow a pre determined amount of water through the valve prior to it shutting off the water supply. There are two models and you should choose the model...
£73.42
Add:
C3860123
ATM Disc Filter 1" BSP Threads Up to 8 Cubic Metres Per Hour The ATM high flow disk filter is ideal for recycled water that has a higher level of contamination due to the disk filters very large surface area. The filter can be...
£53.23
Add:
PLA33860154
ATM Disc Filter 11/4" BSP Threads Up to 8 Cubic Metres Per Hour The ATM high flow disk filter is ideal for recycled water that has a higher level of contamination due to the disk filters very large surface area. The filter can be...
£60.69
Add:
CFFABV
Float For A Ball Valve Used with the float valve Diameter 110mm
£4.47
Add:
C33211601
Barbed 16mm - 1/2" Male BSP Threaded connector Used with 16mm outside diameter or 13mm inside diameter LDPE pipe. Finishes LDPE pipe with a British standard pipe thread making this a very useful fittings when connecting to larger...
£0.33
details Sold Out
C33212001
Barbed 20mm - 1/2" Male Bsp Thread Barbed connector 20 mm - 1/2" BSP is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to...
£0.40
Add:
C31572020
20 mm Barbed Control Valve This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. It is ideal product to use with LDPE as the sharp barb form a permanent secure attachment. ...
£1.47
Add:
C31820201
Barbed 20mm Elbow - 1/2 Inch Bsp Thread Barbed elbow joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.56
Add:
C31820202
Barbed 20mm Elbow - 3/4 Inch Bsp Thread Barbed elbow joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.63
Add:
C32130202
20mm - 3/4" Swivel Connector Female Thread The 20 mm - 3/4" female threaded swivel tap connector is ideal for connecting 20mm pipe to any outside tap or timer. The connector can be used to connect 20 mm pipe to solenoid valves and...
£1.03
Add:
PAL33212503
Barbed Connector 25mm - 1" Male BSP Thread Barbed Connector joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.51
Add:
c33212502
Barbed Connector 25mm - 3/4" Male BSP Thread Barbed Connector joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.51
Add:
C31572525
25 mm Barbed Control Valve This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. It is ideal product to use with LDPE as the sharp barb form a permanent secure...
£1.76
Add:
PAL31820252
Barbed Elbow 25mm x 3/4" BSP Male Thread Barbed elbow joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.97
Add:
PAL33213203
Barbed Connector 32mm - 1" Male BSP Thread Barbed Connector joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.77
Add:
PAL203034
Barbed Elbow 32mm x 1" BSP Male Thread Barbed elbow joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£1.51
Add:
C33211602
Barbed Straight Coupling 16mm - 3/4" male bsp thread Barbed joint 16 mm is suitable for use with LDPE 16 mm outside diameter or 13mm inside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs...
£0.33
Add:
CPAL31010606
Barbed 6mm Pipe Connector Barbed pipe joiner which will join together 6mm outside diameter flexible black pipe.
£0.12
Add:
1104/1366
Barbed Cross 13mm inside diameter x 6mm For running 6mm micro pipe off a 13mm supply pipe. Very quick and easy, just 1 cut to run micro pipe to drippers in baskets and tubs.
£1.01
Add:
C11041666
Barbed Cross 2 x 16mm - 2 X 6mm An easy push fot fittings that will give two take off points from a 16mm pipe so that you can run your 6mm micro pipe to baskets and containers. UV Stabilised Industrial grade plastic Simple...
£1.11
Add:
3102/1313
Barbed Elbow For 13mm Inside Diameter LDPE Water Pipe This barbed Elbow is suitable for use with all pipes made from LDPE with an inside diameter of 13 mm, indeed it will fit pipes with an inside diameter of up to 13.6 mm. The reason for...
£0.51
Add:
C31021616
16mm Barbed Elbow Joint Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together. The elbowr is made from a strong industrial grade UV stabilsed plastic. The connector can be used on any thin walled pipe...
£0.40
Add:
C31820161
Barbed Elbow Joint 16mm - 1/2" Male BSP Thread Used with 16mm outside diameter or 13mm inside diameter LDPE pipe. Finishes LDPE pipe with a British standard pipe thread making this a very useful fittings when connecting to larger...
£0.58
Add:
C31820162
Barbed Elbow 16mm - 3/4" BSP MaleThread Used with 16mm outside diameter or 13mm inside diameter LDPE pipe. Finishes LDPE pipe with a British standard pipe thread making this a very useful fittings when connecting to larger diameter...
£0.47
Add:
C31022020
Barbed Elbow 20 mm Barbed elbow joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple providing the...
£0.45
Add:
PAL31022525
Barbed Elbow 25 mm Barbed elbow joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple providing the...
£0.65
Add:
PAL203033
Barbed Elbow 32 mm Barbed elbow joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple providing the...
£1.16
Add:
CPAL31150666
Barbed Mini Tee 6mm A very simple push fit tee made from a high grade tough plastic by Palplast Very strong Simple push fit Made in the EU
£0.22
Add:
C33212002
Barbed Push Fit Straight Coupling 20mm - 3/4" male bsp thread Barbed Connector joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and...
£0.34
Add:
C31802002
Barbed Push Fit Tee 20mm x20mm x 3/4" Male BSP Thread Barbed Tee joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.59
Add:
PAL31800252
Barbed Push Fit Tee 25mm x25mm x 3/4" Male BSP Thread The barbed male Tee to 25mm push fit barbs are used exclusively with LDPE pipe. This is a thinner walled pipe than the MDPE which is used underground and should be used with...
£0.77
Add:
PAL206032
Barbed Push Fit Tee 32mm x32mm x 1" Male BSP Thread The barbed male Tee to 32mm push fit barbs are used exclusively with LDPE pipe. This is a thinner walled pipe than the MDPE which is used underground and should be used with compression...
£1.39
Add:
C31042516
Barbed Reducing Tee 25 x 25 x 16mm Branch Barbed Reducing Tee joint 25 mm - 16mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the...
£0.86
Add:
PAL31042520
Barbed Reducing Tee 25 x 25 x 20mm Branch Barbed Reducing Tee joint 25 mm - 20mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the...
£0.74
Add:
3106/0013
Barbed Stopend 13mm Inside Diameter LDPE pipe 13 mm LDPE pipe has an outside diameter of 16mm. Water pipe should always be measured on the outside however many retail brands of irrigation pipe measure the inside diameter of...
£0.40
Add:
C31060016
Barbed Stopend For 16mm Outside Diameter Pipe The stopend is used to terminate the end of 16mm outside diameter or 13mm inside diameter pipe. The large barbs make sure that the fitting once fitted stays fitted unlike other domestic...
£0.35
Add:
C31060020
Barbed Stopend 20mm Barbed Stop End t 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.35
Add:
C31060025
Barbed Stopend 25mm Barbed Stop End 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.40
Add:
PAL31060032
Barbed Stopend 32mm Barbed Stop End 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.49
Add:
3100/1313
Barbed Straight Connector For 13mm This straight connector is suitable for use with all pipes made from LDPE with an inside diameter of 13 mm, indeed it will fit pipes with an inside diameter of up to 13.6 mm. The reason for this is...
£0.41
Add:
C31001616
Barbed Straight Connector 16mm Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together. The connector is made from a strong industrial grade UV stabilised plastic. The connector can be used on any thin...
£0.34
Add:
C31002020
Barbed Connector 20mm Barbed connector joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is...
£0.35
Add:
PAL31002525
Barbed Straight Connector 25mm Barbed joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is...
£0.42
Add:
PAL200033
Barbed Straight Connector 32mm Barbed joint 25 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is...
£0.72
Add:
C31800201
Barbed 20mm Tee With 1/2" BSP Male Threaded Branch The barbed Tee is ideal for connecting equipment or changing pipe diameters on long runs. The fitting is made in the EU using accurate manufacturing techniques making this an ideal...
£0.65
Add:
3180/0131
Barbed Tee With a 1/2" BSP Male Thread Barbs Suitable For 13mm Inside Diameter Pipe This barbed Tee with a 1/2" MSP male threaded branch is suitable for use with all pipes made from LDPE with an inside diameter of 13 mm, indeed it...
£0.86
Add:
3180/0132
Barbed Tee Joint 13mm inside diameter - 3/4 Inch Bsp Threaded Branch Barbed Tee For 13 mm or 1/2" inside diameter Pipe to a 3/4" BSP male threaded branch is suitable for use with all pipes made from LDPE with an inside diameter of...
£0.86
Add:
3103/1313
Barbed tee joint For 13mm inside diameter LDPE pipe This straight connector is suitable for use with all pipes made from LDPE with an inside diameter of 13 mm, indeed it will fit pipes with an inside diameter of up to 13.6 mm. The...
£0.53
Add:
C31031616
Barbed 16mm Tee Joint Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together. The connector is made from a strong industrial grade UV stabilsed plastic. The connector can be used on any thin walled pipe...
£0.41
Add:
C206002
Barbed T Joint Branch 1/2" Male Thread A barbed Tee fitting with a 1/2" male threaded. The large barbs make sure that the fitting once fitted stays fitted unlike other domestic brands that can only operate and pressures of...
£0.42
Add:
C31800162
Barbed Tee -3/4" Male Threaded Branch A barbed Tee fitting with a 3/4" male BSP thread. The large barbs make sure that the fitting once fitted stays fitted unlike other domestic brands that can only operate and pressures of...
£0.60
Add:
C31032020
Barbed 20mm Tee Joint Barbed Tee joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.45
Add:
Z2479
Barbed Tee Joint 20mm - 1/2 Inch Bsp Threaded Branch Quick and simple installation Made from industrial grade plastic Will withstand pressures up to 120 psi Stronger than standard fittings so can cope with standing on Important note for runs over...
£1.31
Add:
PAL31032525
Barbed Tee Joint 25mm Barbed tee joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.87
Add:
PAL205033
Barbed Tee Joint 32mm Barbed tee joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£1.32
Add:
C31560303
Threaded Control Valve 1" BSP Male his is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. The valve is finished on both ends with a standard 1" male BSP thread so...
£2.58
Add:
C31560202
Control Valve 3/4" BSP Male Thread This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. The valve is finished on both ends with a standard 3/4" male BSP thread...
£1.85
Add:
3157/1313
Barbed Tap Suitable For 13mm Inside diameter LDPE pipe This straight connector is suitable for use with all pipes made from LDPE with an inside diameter of 13 mm, indeed it will fit pipes with an inside diameter of up to 13.6 mm. The reason...
£2.77
Add:
C324024AC
Bermad 200 Series Solenoid Valve 24 Volts Ac With a 11/2"" BSP Female thread If you are new to irrigation systems and are at all unsure then please do call or email for more information. This is a very high flow valvbe and if...
£88.70
Add:
C325024AC
Bermad 200 Series Solenoid Valve 24 Volts Ac With a 2" BSP Female thread If you are new to irrigation systems and are at all unsure then please do call or email for more information. This is a very high flow valvbe and if you are...
£102.29
Add:
BER352512
Adjustable Direct Acting Pressure Reducer 1”- PRV The BERMAD Adjustable Direct Acting Pressure Reducer is actuated by a pressure responsive diaphragm, which seeks to reach equilibrium between hydraulic and set spring force. The BERMAD...
£46.50
Add:
BER352508
Adjustable Direct Acting Pressure Reducer 1”- PRV The BERMAD Adjustable Direct Acting Pressure Reducer is actuated by a pressure responsive diaphragm, which seeks to reach equilibrium between hydraulic and set spring force. The BERMAD...
£46.50
Add:
BER352520
Adjustable Direct Acting Pressure Reducer 1”- PRV The BERMAD Adjustable Direct Acting Pressure Reducer is actuated by a pressure responsive diaphragm, which seeks to reach equilibrium between hydraulic and set spring force. The BERMAD...
£46.50
Add:
BER354030
Adjustable Direct Acting Pressure Reducer 11/2”- PRV The BERMAD Adjustable Direct Acting Pressure Reducer is actuated by a pressure responsive diaphragm, which seeks to reach equilibrium between hydraulic and set spring force. The...
£99.68
Add:
C322512DC
Bermad 12 Volt DC Control valve With 2 Way Internal Controls and Tri Integrated Open - Auto- Closed The BERMAD 2-Way Solenoid Controlled Valve with Trio integrated Open-Auto-Close manual selector, is a hydraulically operated, diaphragm...
£30.56
Add:
C322524DC
Bermad 24 Volt DC Control valve With 2 Way Internal Controls and Tri Integrated Open - Auto- Closed The BERMAD 2-Way Solenoid Controlled Valve with Trio integrated Open-Auto-Close manual selector, is a hydraulically operated, diaphragm...
£31.64
Add:
BER352010MF
Bermad Adjustable Pressure Regulator White Cap 3/4" male - 3/4" female thread Used for standard flow situations Flow range 0.2 - 5 cubic metres per hour Operating pressure 0.7 - 9 bar Adjustable pressure from 0.8 -...
£13.36
Add:
BER352010MF
Bermad Adjustable Pressure Regulator Black Cap 3/4" male - 3/4" female thread Used for standard flow situations Flow range 0.2 - 5 cubic metres per hour Operating pressure 0.7 - 9 bar Adjustable pressure from 3.5-6 bar...
£13.36
Add:
C352110MF
Bermad Adjustable Pressure Regulator Bermad Adjustable pressure reducer 3/4" male - 3/4" female thread Used for low flow situations Flow range 0.03 - 5 cubic metres per hour Operating pressure 0.7 - 9 bar Adjustable pressure from 0.8 - 2.5...
£18.71
Add:
C352010MF
Bermad Adjustable Pressure Regulator Red Top 3/4" male - 3/4" female thread Used for standard flow situations Flow range 0.2 - 5 cubic metres per hour Operating pressure 0.7 - 9 bar Adjustable pressure from 2 - 4 bar...
£14.77
Add:
BER32L1024AC
Bermad Manifold Filter Valve 1 Inch Thread 24V AC Coil The Bermad Manifold Filter Valve combines either a solenoid valve or a pressure regulating valve with a screen filter in a single unit. Size of Thread Inlet 1" BSP Male Outlet...
£44.97
Add:
BER32L0524AC
Bermad Manifold Solenoid Valve 1" BSP Male Thread Inlet Outlet 1" BSP Female Thread This is a manifold valve and is used when space is an issue. Each valve can be threaded together to form a chain. The water flows from...
£36.38
Add:
BER3240DI
Replacement Diaphragm For 11/2" or 2" Electric Bermad Valves
£28.51
Add:
BER3225D1
Replacement Diaphragm For 1" or 3/4" Valves
£10.19
Add:
C322524AC
Bermad 200 Series Solenoid Valve 24 Volts Ac With a 1" BSP Female thread If you are new to irrigation systems and are at all unsure then please do call or email for more information. 1" BSP Female Thread 0.5bar...
£32.79
details Sold Out
C321224AC
Bermad 200 Series Solenoid Valve 24 Volts Ac With a 1/2" BSP Female thread If you are new to irrigation systems and are at all unsure then please do call or email for more information. 1/2" BSP Female Thread 0.5bar...
£25.64
Add:
C322124AC
Bermad 200 Series Solenoid Valve 24 Volts Ac With a 3/4" BSP Female thread No Flow Control, If you are new to irrigation systems and are at all unsure then please do call or email for more information. 3/4" BSP Female...
£28.61
Add:
C321924AC
Bermad 200 Series Solenoid Valve 24 Volts Ac With a 3/4" BSP Female thread If you are new to irrigation systems and are at all unsure then please do call or email for more information. 3/4" BSP Female Thread 0.5bar...
£32.60
Add:
CBTAP12
Brass Bibtap 1/2" male thread Inlet Thread. Thread On Outlet 3/4" BSP This is a standard 1/2" Bibtap that you would find in most domestic properties. The tap has a 1/2" Male inlet thread and a 3/4" outlet thread....
£12.26
details Sold Out
CBTAP12CV
Brass Bibtap 1/2" male thread Inlet Thread. Thread On Outlet 3/4" BSP and a double check valve This is a standard 1/2" Bibtap that you would find in most domestic properties. The tap has a 1/2" Male inlet thread...
£13.09
Add:
BRT481330
Black Ribbed Pond Aquatic Pipe 13mm Inside diameter Coil reinforced Suitable for low pressure applications Suitable for low pressure suction or discharge Ideal for ponds and pond pumps 13 mm inside diameter length 30...
£38.42
Add:
BRT481930
Black Ribbed Pond Aquatic Pipe 19mm Inside diameter Coil reinforced Suitable for low pressure applications Suitable for low pressure suction or discharge Ideal for ponds and pond pumps 19 mm inside diameter length 30...
£51.36
Add:
BRT482530
Black Ribbed Pond Aquatic Pipe 25mm Inside diameter Coil reinforced Suitable for low pressure applications Suitable for low pressure suction or discharge Ideal for ponds and pond pumps 25 mm inside diameter length 30...
£55.67
Add:
BRT483230
Black Ribbed Pond Aquatic Pipe 32mm Inside diameter Coil reinforced Suitable for low pressure applications Suitable for low pressure suction or discharge Ideal for ponds and pond pumps 32 mm inside diameter length 30...
£98.99
Add:
BRT483830
Black Ribbed Pond Aquatic Pipe 38mm Inside diameter Coil reinforced Suitable for low pressure applications Suitable for low pressure suction or discharge Ideal for ponds and pond pumps 38 mm inside diameter length 30...
£108.90
Add:
BWK100SM
Border Watering Kit 100 Square Metres A simple pressure compensated dripper kit which will water an area of 100 square metres. Pressure compensated drip pipe is unlike leaky or soaker hose because the drips are regulated along the pipe...
£303.40
Add:
BWK100SM30cm
Border Watering Kit 100 Square Metres Using 30 cm spaced drippers This kit is the same as the standard 50 cm spaced drippers apart from the drippers are spaced 30 cm apart. We would normally suggest that you should use a 50 cm drip spacing as...
£328.52
Add:
BWK25SM
Border Watering Kit 25 Square Metres A simple pressure compensated dripper kit which will water an area of 25 square metres. Pressure compensated drip pipe is unlike leaky or soaker hose because the drips are regulated along the pipe...
£103.66
Add:
BWK50SM
Border Watering Kit 50 Square Metres A simple pressure compensated dripper kit which will water an area of 50 square metres. Pressure compensated drip pipe is unlike leaky or soaker hose because the drips are regulated along the pipe...
£144.82
Add:
BWK10X1
Border Watering Kit 10 metres x 1 metre width This is a very simple kit to install and is very effective. The kit is complete with all the parts needed to water a narrow border 1 x 20mm tap connector push fit 1 x 25 metres of 20 mm black water...
£51.07
Add:
BSPRAYWK50SQM
Border spray watering kit suitable for 50 square metres A complete kit with all the connections to a tap, hose pipe or water timer. 1 x 15 metres 20 mm water pipe 7x 3 metre diameter sprayers on stake 1 3/4" swivel connector to 20...
£23.75
Add:
BSK180
Greenhouse Bed sprayer complete 180 degrees This simple kit includes all the parts needed to install a simple spray watering system in the greenhouse. 180 degree nozzle for even water ditribution 1 or 1.5 metre metre radius...
£2.99
details
E033319
Brass Hose Fitting with 3/4" Male Thread Solid brass construction O Ring seals available as a spare Main body warranty 5 years Brass Tap Connector with 3/4" Male Thread With Quick Connector fittings compatible with plastic systems ...
£10.20
Add:
CBBCFV
Brass Float Valve ( Ball Cock) High Pressure A high pressuire brass float valve that can be used for tank filling etc Made in Italy High Pressure ( Mains Pressure) 1/2" BSP Male thread
£11.76
Add:
C735019
Brass Float Valve ( Ball Cock) High Pressure A high pressuire brass float valve that can be used for tank filling etc Made in Italy High Pressure ( Mains Pressure) 3/4" BSP Male thread
£31.68
Add:
C0401295
Brass Bibtap 1/2" BSP Inlet Thread 3/4" Outlet Thread with Hose Tail For 12mm Hose pipe A simple Bibtap with 90 degree ball valve on/off operation. Made from Brass the valve is strong and durable. The longlsting durable...
£5.49
Add:
C0401296
Brass Bibtap 3/4" BSP Inlet Thread Hose Tail For 19mm Hose pipe Thread on Outlet 1" BSP Male Thread A simple Bibtap with 90 degree ball valve on/off operation. Made from Brass the valve is strong and durable. The...
£8.69
Add:
E034012
Brass Hose Coupling To Join 2 Female Quick Click Couplings Together Solid brass construction Compatible with standard plastic hose fittings Standard quick release connections Made In Italy Warranty 5 Year Body Strict quality controls...
£3.96
Add:
E036012
Brass Hose To Hose Joiner 12mm or 1/2" Solid brass construction O Ring seals available as a spare Main body warranty 5 years With Quick Connector fittings compatible with plastic systems Use with 1/2 inch or 12mm hose pipes Made In...
£7.56
Add:
E036119
Brass 19mm 3/4" Hose Joiner Solid brass construction O Ring seals available as a spare Main body warranty 5 years With Quick Connector fittings compatible with plastic systems Use with 3/4 inch or 19mm hose pipes Made In Italy ...
£9.84
Add:
C0423314
Brass Hose Tail 1 1/4 inch with 1 1/4 inch Female Thread Brass hose tail ideal for suction hoses and lances or permanent attachment to hose reels. Strict quality controls and 5 year guarantee on main body: maximum reliability ...
£8.13
Add:
C083033
Brass Hose Tail 1" BSP Female Thread to 1" or 25mm Hose Tail Solid Brass Construction Flat Sealing surface 1" BSP Female Thread Outlet fits 1" or 25mm inside diameter hose More...
£5.38
Add:
C0411825
Brass Hose Tail 1" Hose Pipe - 1" Male Thread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee on main body: maximum reliability ...
£5.45
Add:
E087011
Brass Hose Tail 1/2" BSP Female Thread to 1/2" Hose Tail Solid Brass Construction Flat Sealing surface 1/2" BSP Female Thread ( This is unusual and will not fit a 1/2" Bibtap ) More information on...
£1.92
Add:
C0411812
Brass Hose Tail For 1/2" pipe with 1/2" Male thread BSP Thread Brass hose tail ideal to for suction hoses or permanent attachment of spray products etc Strict quality controls and 5 year guarantee on main body:...
£1.70
Add:
C083021
Italian Brass Hose Tail For 1/2" (12mm) Hose Pipe -3/4" Female BSP thread Made in Italay from high quality brass this hose tail is the most common in the domestic propert. The female 3/4" Thread ( If you measure the...
£3.96
Add:
C0411811
Brass Hose Tail 10mm Inside diameter pipe - 1/2" Male thread BSP Thread This brass hose fitting has an 10mm barbed end suitable for 10mm inside diameter pipe. Solid brass 1/2" BSP Male thraed 10mm Barbed...
£2.00
details Sold Out
C0411750
Brass Hose Tail 10mm Inside diameter pipe - 1/4" Male thread BSP Thread This brass hose fitting has an 10mm barbed end suitable for 10mm inside diameter pipe. Solid brass 1/4" BSP Male thraed 10mm Barbed...
£1.57
Add:
C0411809
Brass Hose Tail 10mm Inside diameter pipe - 3/8" Male thread BSP Thread This brass hose fitting has an 10mm barbed end suitable for 10mm inside diameter pipe. Solid brass 3/8" BSP Male thraed 10mm Barbed...
£1.55
Add:
C081044
Brass Hose Tail For 11/4" Hose pipe with 11/4" Male thread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee on main body: maximum...
£13.00
Add:
C0411755
Brass Hose Tail For 13mm inside diameter Hose pipe with 3/8" Male thread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee on main body: maximum...
£1.97
Add:
C0411817
Brass Hose Tail For 13mm Inside Diameter Hose pipe with 3/4" Male thread BSP THread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee on main...
£2.29
Add:
C0411804
Brass Hose Tail 13 mm Inside diameter pipe - 1/4" Male thread BSP Thread This brass hose fitting has an 8mm barbed end suitable for 13mm inside diameter pipe. Solid brass 1/4" BSP Male thraed 10mm Barbed...
£1.83
Add:
C0411754
Brass Hose Tail 15 mm Inside diameter pipe - 3/8" Male thread BSP Thread This brass hose fitting has an 15mm barbed end suitable for 15mm inside diameter pipe. Solid brass 3/8" BSP Male thread 15 mm...
£4.53
Add:
083066
Brass Hose Tail 2 inch with 2 inch Female Thread A high quality Italian made brass hose connector suitable for 2 inch hose. The brass ribs give added security when combined with high quality jubilee clips making this a very strong sitting....
£25.15
Add:
C0411824
Brass Hose Tail For 20mm Inside Diameter Hose pipe with 1" Male thread BSP THread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee on main...
£3.72
Add:
C0411813
Brass Hose Tail 20 mm Inside diameter pipe - 1/2" Male thread BSP Thread This brass hose fitting has an 20mm barbed end suitable for 20mm inside diameter pipe. Solid brass 1/2" BSP Male thread 20 mm...
£2.09
details Sold Out
BHT083088
Brass Hose Tail 3 inch with 3 inch BSPF Female Thread A high quality Italian made brass hose connector suitable for 3 inch hose. The brass ribs give added security when combined with high quality jubilee clips making this a very strong...
£46.38
details Sold Out
C083022
Brass Hose Tail 3/4" BSP Female Thread to 3/4" (19 - 20mm) Hose Tail Solid Brass Construction Flat Sealing surface 3/4" BSP Female Thread This would normally fit the outlet of a 1/2"...
£3.87
Add:
C0411818
Brass Hose Tail For 3/4" Inside Diameter Hose pipe with 3/4" Male thread BSP THread Brass hose tail ideal to for suction hoses or permanent attachment of spray products etc Strict quality controls and 5 year guarantee on main body:...
£2.85
details Sold Out
C0411765
Brass Hose Tail For 32mm Inside Diameter Hose pipe with 1" Male thread BSP THread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee on main...
£8.58
Add:
C0423315
Brass Hose Tail 38mm with 11/2 inch Female Thread A high quality Italian made brass hose connector suitable for 38mm hose. The brass ribs give added security when combined with high quality jubilee clips making this a very strong sitting....
£12.04
details Sold Out
C0411840
Brass Hose Tail For 38mm Inside Diameter Hose pipe with 11/2"" Male thread BSP Thread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee...
£21.45
Add:
C0411771
Brass Hose Tail For40mm Inside Diameter Hose pipe with 11/4"" Male thread BSP THread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee...
£8.89
Add:
C0411775
Brass Hose Tail For 50mm Inside Diameter Hose pipe with 11/2"" Male thread BSP THread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee...
£19.14
Add:
C0411850
Brass Hose Tail For 50mm Inside Diameter Hose pipe with 2" Male thread BSP THread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee on main...
£11.66
Add:
C0411777
Brass Hose Tail For 60mm Inside Diameter Hose pipe with 2" Male thread BSP Thread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee on main...
£21.14
Add:
C0411806
Brass Hose Tail 6mm Inside diameter pipe - 1/4" Male thread BSP Thread This brass hose fitting has an 6mm barbed end suitable for 6mm inside diameter pipe. Solid brass 1/4" BSP Male thraed 6mm Barbed end...
£1.57
Add:
C083588
Brass Hose Tail For 75mm Inside Diameter Hose pipe with 3" Male thread BSP THread Brass hose tail ideal to for suction hoses or permanent attchment of spray products etc Strict quality controls and 5 year guarantee on main...
£42.24
Add:
C0411756
Brass Hose Tail 8mm Inside diameter pipe - 1/2" Male thread BSP Thread This brass hose fitting has an 8mm barbed end suitable for 8mm inside diameter pipe. Solid brass 1/2" BSP Male thraed 8mm Barbed end...
£5.01
Add:
C0411803
Brass Hose Tail 8mm Inside diameter pipe - 1/4" Male thread BSP Thread This brass hose fitting has an 8mm barbed end suitable for 8mm inside diameter pipe. Solid brass 1/4" BSP Male thread 8mm Barbed end will...
£1.57
Add:
C0411753
Brass Hose Tail 8 mm Inside diameter pipe - 3/8" Male thread BSP Thread This brass hose fitting has an 8mm barbed end suitable for 8mm inside diameter pipe. Solid brass 3/8" BSP Male thread 8mm Barbed...
£4.07
Add:
MEG0403000
Brass Lever Ball Valve 1/4" BSP Female Thread The Mega Ball valve, type 100 is a widely used ball valve that is used for agricultural, landscaping, pool and industrial projects, as well as domestic and professional heating and plumbing...
£3.62
Add:
MEG0403006
Brass Lever Ball Valve 11/2" Female Thread The Mega Ball valve, type 100 is a widely used ball valve that is used for agricultural, landscaping, pool and industrial projects, as well as domestic and professional heating and plumbing...
£18.53
Add:
BV293032
Brass Lever Ball Valve 11/4" Female thread The Mega Ball valve, type 100 is a widely used ball valve that is used for agricultural, landscaping, pool and industrial projects, as well as domestic and professional heating and plumbing...
£14.30
Add:
BV293050
Brass Lever Ball Valve 2" BSP Female Thread The Mega Ball valve, type 100 is a widely used ball valve that is used for agricultural, landscaping, pool and industrial projects, as well as domestic and professional heating and plumbing...
£32.79
Add:
MEG0403009
Brass Lever Ball Valve 3" BSP Female Thread The Mega Ball valve, type 100 is a widely used ball valve that is used for agricultural, landscaping, pool and industrial projects, as well as domestic and professional heating and plumbing...
£105.33
details Sold Out
BV293019
Brass Lever Ball Valve 3/4" BSPF Female Threads The Mega Ball valve, type 100 is a widely used ball valve that is used for agricultural, landscaping, pool and industrial projects, as well as domestic and professional heating and plumbing...
£6.36
Add:
MEG0403001
Brass Lever Ball Valve 3/8" BSP Female Thread The Mega Ball valve, type 100 is a widely used ball valve that is used for agricultural, landscaping, pool and industrial projects, as well as domestic and professional heating and plumbing...
£4.24
Add:
MEG0403010
Brass Lever Ball Valve 4" Female Thread The Mega Ball valve, type 100 is a widely used ball valve that is used for agricultural, landscaping, pool and industrial projects, as well as domestic and professional heating and plumbing applications....
£174.12
details Sold Out
C293025
Brass Lever Ball Valve 1" Female thread The Mega Ball valve, type 100 is a widely used ball valve that is used for agricultural, landscaping, pool and industrial projects, as well as domestic and professional heating and plumbing applications....
£14.82
Add:
C293012
Brass Lever Ball Valve 1/2" BSP Female Thread The Mega Ball valve, type 100 is a widely used ball valve that is used for agricultural, landscaping, pool and industrial projects, as well as domestic and professional heating and plumbing...
£4.59
Add:
E032012
Italian Made Brass Hose Fitting. Quick click connector to 1/2" BSP thread High quality precision made Italian brass hose coupling that is compatible with all the major branded quick click connectors like Hozelock, Claber and...
£2.64
Add:
E032119
Italian Brass Quick Click Connector - 3/4" BSP Male Thread High quality precision made Italian brass hose coupling that is compatible with all the major branded quick click connectors like Hozelock, Claber and Gardena. This is a...
£3.36
Add:
C600254P63
Naan Heavy Duty Sprinkler 49 Metres Diameter Output 4.5 Cubic Metres This is a very large Naan sprinkler which is ideal for very large field irrigation. The sprinkler head has an adjustable arc which can be lifted for a full 360...
£81.38
Add:
E033012
Brass Quick Release Hose Connector 12 mm Solid brass construction O Ring seals available as a spare Main body warranty 5 years With Quick Connector fittings compatible with plastic systems Made in Italy How to Measure The Diameter Of Your Hose Pipe ...
£9.24
Add:
E033119
Brass Quick Release Hose Connector 19mm or 3/4" Hose Pipe Solid brass construction O Ring seals available as a spare Main body warranty 5 years With Quick Connector fittings compatible with plastic systems Use with 3/4" Hose Pipes...
£11.04
Add:
E033512
Brass Quick Release Water Stop Connector 12mm Solid brass construction O Ring seals available as a spare Main body warranty 5 years With Quick Connector fittings compatible with plastic systems Use with 1/2 inch or 12mm hose pipes Automatic...
£11.04
Add:
E033619
Brass Quick Release Water Stop Connector 19mm Solid brass construction O Ring seals available as a spare Main body warranty 5 years With Quick Connector fittings compatible with plastic systems Use with 3/4 inch or 19mm hose pipes Automatic water...
£12.48
Add:
C031319
Brass Revolving Elbow 3/4 Inch Female Thread Solid brass construction O Ring seals available as a spare Main body warranty 5 years With Quick Connector fittings compatible with plastic systems Use with 1/2 inch or 12mm hose pipes Made In Italy ...
£10.92
Add:
C270025
Brass Non Return Valve Spring Assisted 1" BSP Thread Brass Body Nitrile Rubber Seal Positive spring return 25 bar rated maximum temperature 110 centigrade
£11.38
Add:
CMEG0420550
Brass Non Return Valve Spring Assisted 1/4" BSP Thread Brass Body Nitrile Rubber Seal Positive spring return 25 bar rated maximum temperature 110 centigrade
£7.23
Add:
MEG0404959
Non Return Vales Brass 11/2" BSPF Female thread and Strainer Italian made Brass spring non return valve with mesh strainer. The valve is designed to allow the maximum flow through with the minimum restriction. Once the pump...
£42.83
Add:
CBCV270040
Brass Non Return Valve Spring Assisted 11/2" BSP Thread Brass Body Nitrile Rubber Seal Positive spring return 10 bar rated maximum temperature 100 centigrade
£27.52
details Sold Out
C270032
Non Return Vales Brass 11/4" BSPF Female thread Brass Body Made in Italy 11/4" BSP Thread Positive spring assisted return Nitrile Rubber seal Maximum temperature 100 centigrade 10 bar rated ...
£22.45
Add:
MEG0420559
Non Return Vales Brass 3" BSPF Female thread Prevents water draining down out of a system Brass Body Nitrile Butyl Rubber Seal Positive spring return 25 bar rated
£63.86
Add:
MEG0420554
Brass Non Return Valve 1" BSPF Spring None Return A spring powered non return or foot valve. Valve body brass Spring stainless steel Seal Nitrile rubber Plastic valve Polyoxymethylene 16 Bar rated Maximum temperature 100...
£14.51
Add:
C270012
Brass Non Return Valve Spring Assisted 1/2" BSP Thread Brass Body Nitrile Rubber Seal Positive spring return 25 bar rated maximum temperature 110 centigrade
£5.52
Add:
MEG0420556
Brass Non Return Valve 11/2" BSPF Spring Return A spring powered non return or foot valve. Valve body brass Spring stainless steel Seal Nitrile rubber Plastic valve Polyoxymethylene 16 Bar rated Maximum temperature 100...
£27.53
Add:
MEG0420557
Non Return Vales Brass 2" BSPF Female Thread Spring Assisted Return Brass Body Positive spring return Nitrile Rubber seal 10 bar rated 2" BSP female thread Max temperature 100 centigrade ...
£27.44
Add:
MEG0420559
Brass Non Return Valve 3" BSPF Spring Return A spring powered non return or foot valve. Valve body brass Spring stainless steel Seal Nitrile rubber Plastic valve Polyoxymethylene 16 Bar rated Maximum temperature 100...
£120.52
Add:
C270019
Brass Non Return Valve Spring Assisted 3/4" BSP Thread Brass Body Nitrile Rubber Seal Positive spring return 25 bar rated maximum temperature 110 centigrade
£7.41
Add:
CV270009
Brass Non Return Valve Spring Assisted 3/8" BSP Thread Brass Body Nitrile Rubber Seal Positive spring return 40 bar rated maximum temperature 110 centigrade
£7.55
details Sold Out
MEG0404958
Non Return Valve And Wire Filter 11/4" BSP Female Thread The brass non return valve is used to prevent the water from the pump syphoning out of the inlet. Even self priming pumps require this as the initail start can be wearing when...
£20.31
Add:
MEG0404956
Brass Spring Non Return Valve With Gauze 3/4" BSP Female Thread Brass non return valve or foot valve prevents water running back through the system. Brass Body Positive spring return 10 bar rated seal Nitrile...
£5.08
Add:
E031225
Brass Tap Connector with Quick Connector 1" Solid brass construction O Ring seals available as a spare Brass Tap Connector with 1" BSP thread. With Quick Connector fittings compatible with plastic systems Strict quality controls...
£5.40
Add:
E031012
Brass Tap Connector with Quick Connector 1/2" Solid brass construction O Ring seals available as a spare Brass Tap Connector with 1/2" BSP thread. With Quick Connector fittings compatible with plastic systems Strict quality...
£3.36
Add:
E031119
Brass Tap Connector with Quick Connector 3/4" Solid brass construction O Ring seals available as a spare Brass Tap Connector with 3/4" BSP thread. With Quick Connector fittings compatible with plastic systems Strict quality...
£3.36
Add:
E039219
Brass Three Way Manifold With Taps 3/4" Male Thread Solid brass construction 90 degree tap operation Strict quality controls and 5 year guarantee on main body: maximum reliability S tandard 3/4" threads for timers and other...
£48.72
Add:
E039019
Brass 2 Way Manifold With Quick Click Connectors Solid brass construction 90 degree tap operation Standard quick release connections 3/4 inch connection Used for distributing water from an outside tap Made in Italy This 2 way Brass manifold...
£27.72
Add:
E039210
Brass 2 Way Manifold With 3/4" BSP Male Threaded Outlets Solid brass construction 90 degree tap operation Strict quality controls and 5 year guarantee on main body: maximum reliability S tandard 3/4" threads for timers and other...
£29.99
Add:
E039119
Brass 2 Way Y Manifold With 3/4" BSP Male Threaded Outlets Solid brass construction 90 degree tap operation Made In Italy Standard 3/4" threads for timers and other applications How to measure a thread size All (or most) thread...
£27.72
Add:
CBWALLPL12
Brass Wall Plate For 1/2" BSP outside Tap Bibtap This is a brass wall plate that is used to secure a 1/2" BSP threaded tap to the wall and attach it to 15mm Copper water pipe. The wall plate needs to be secured using 3 screws ...
£3.92
Add:
C10680034
Budget hand punch The budget hand punched is used to punch a hole in the main supply tube which is either 16 or 20mm in diameter so that the dripper can be inserted and then the micro pipe attached to the end of the dripper Hole...
£1.04
Add:
PAL33610004
Female Threaded Cap And O Ring 1 1/4" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£1.51
Add:
C33612003
Female Threaded Cap And O Ring 1" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.83
Add:
PAL33612001
Female Threaded Cap And O Ring 1/2" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.39
Add:
PAL33610005
Female Threaded Cap And O Ring 11/2" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£1.55
Add:
PAL33610006
Female Threaded Cap And O Ring 2" BSP Female Thread Made from 100 % virgin Polypropylene this cap is 10 bar rated. The O ring fits inside the cap making a waterproof seal without the need for PTFE tape Made In The EU 100%...
£2.88
Add:
PAL33612002
Female Threaded Cap And O Ring 3/4" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.50
details Sold Out
CAR38C0520
Standard Carson Valve Box Lid Fits 12" x 18" Carson Valve Box The Carson heavy duty valve box lid is a suitable replacement lid for this heavy duty valve box
£27.46
Add:
CAR38C0512
Standard Carson Valve Box Lid Fits 12" x 18" Carson Valve Box The Carson heavy duty valve box lid is a suitable replacement lid for this heavy duty valve box
£19.54
Add:
C38C0010
Carson Valve Box 10 inch A very strong 10 inch valve box suitable for a two solenoid valve or as a cover for tap etc Rigid side walls Structural foam manufacturing process Perfect for turf applications HDPE (high-density...
£21.30
Add:
C38C0020
Carson Valve Box Jumbo 21 inch x 15 inch A very strongvalve box suitable for a eight solenoid valve or as a cover for tap etc Highlights Rigid side walls Structural foam manufacturing process Perfect...
£62.81
Add:
C38C0012
Carson Valve Box Standard 12 inch x 18 inch A very strong valve box suitable for six solenoid valves or as a cover for taps etc Highlights Rigid side walls Structural foam manufacturing process Perfect for turf...
£47.04
Add:
EHSZ437400
Hunter Check Valve For Hunter The check valve is attached to the bottom of the pop up and will prevent the water from draining out of the system pipes on slopes etc. This cuts down on wasted water and prevents water puddles near...
£1.63
Add:
C47280000
Click Fit 2 Way Hose Connector A simple connector that will join to click fit fittings together in order to extend hose pipe. The fitting is made in the EU from high grade industrial plastic that is UV stabilised Made in the EU...
£1.19
Add:
C47290000
Click Fit 3 Way Hose Connector A simple connector that will join 2 hoses to one so ideal for watering various areas of teh garden at the same time. Click fit fittings together in order to extend hose pipe. The fitting is made in the EU...
£1.28
Add:
C47260002
Click Fit Dual Tap Connector 3/4 inch BSP female thread 2 on/off valves Turn 1 tap into 2.
£5.52
Add:
CW1099
Digital Hunidity and Or Temperature switch Solid State Temperature and Humidity Sensor Inpurt Voltage 24 VAC Output Voltage 24 VDC Temperature digital display with simple up and down arrows to increase the temperature...
£27.49
Add:
ECO90BLK
Compact 85 Litre Water Tank This is a marvellous water tank for smaller gardens when space is at a premium. The tank or water butt is rectangular in shape and this makes it easy to slip behind a fence, shed or greenhouse. If you are...
£134.06
Add:
CZ3654A
C oolnet Fogger 4 Outlet The coolnet fogger cross is the most used. The spray is 50 microns so ideal for cooling greenhouses or for increasing the humidity in the greenhouse Coolnet Foggers will keep conditions in your...
£2.96
Add:
SUC-HOSE3830
Copely Medium Duty Suction Hose 11/2"" 38mm Internal Diameter A medium duty suction hose produced by a UK Manufacturer. This is a Medium Duty PVC hose reinforced with a rigid crush and kink resistant internal PVC helix. It is...
£117.36
details Sold Out
SUC-HOSE3230
Copely Medium Duty Suction Hose 11/4"" 32mm Internal Diameter A medium duty suction hose produced by a UK Manufacturer. This is a Medium Duty PVC hose reinforced with a rigid crush and kink resistant internal PVC helix. It is...
£90.74
Add:
SUCT-SoldBYMetre
Copely Medium Duty Suction Hose 11/4" 32mm Internal Diameter A medium duty suction hose produced by a UK Manufacturer. This is a Medium Duty PVC hose reinforced with a rigid crush and kink resistant internal PVC helix. It is both...
£6.04
details Sold Out
SUCT-SoldBYMetre
Copely Medium Duty Suction Hose 1" 25mm Internal Diameter A medium duty suction hose produced by a UK Manufacturer. This is a Medium Duty PVC hose reinforced with a rigid crush and kink resistant internal PVC helix. It is both tough...
£3.51
details Sold Out
SUCT-HOSE51-5
Copely Medium Duty Suction Hose 11/2" 38mm Internal Diameter A medium duty suction hose produced by a UK Manufacturer. This is a Medium Duty PVC hose reinforced with a rigid crush and kink resistant internal PVC helix. It is both...
£7.25
Add:
DAB1200M
Dabs Divertron 1200 M Pressure Pump Auto Start The Dabs Divertron 1200 m is the ideal pump for most domestic or small commercial installations. The pump is installed inside the tank and has an stainless steel screen filter. The...
£416.90
details Sold Out
40/50pulsar
£1,042.80
Add:
HUNTDEC
Decoders Suitable For ACC Decoder Control Unit Decoder modules used with the ACC Decoder control unit. These are available as 1 Station Module 2 Station Module 4 Station Module 6 Station Module
£107.74
details
Z6417
Disc Filter Insert 0.1 (Yellow) Suitable for recycled, river or grey water Max working temperature 60 centigrade
£36.70
Add:
Z6412
Disc Filter Insert 0.25 (Brown) Suitable for recycled, river or grey water Max working temperature 60 centigrade
£36.70
Add:
DOLP2
Dolphin 2 Inch Floating Strainer DOLPHIN FLOATING SUCTION STRAINERS DRAW FROM JUST BELOW THE SURFACE, AVOIDING SAND, MUD AND FLOATING MATTER. THEY DO NOT GET BURIED WHEN GROUNDED IN SHALLOW WATER AND ARE MADE ENTIRELY OF TOUGH, CORROSION...
£193.91
details Sold Out
255063
VDL Double Union Ball Valve 2" x 2" Imperial Vdl ball valves are made to the highest standard. Made from PVC these are suitable for water, chemical and food use Made in Holland UPVC Suitable for food use EPDM...
£43.61
Add:
C255220
VDL Double Union Ball Valve 20mm x 20mm Vdl ball valves are made to the highest standard. Made from PVC these are suitable for water, chemical and food use Made in Holland UPVC Suitable for food use EPDM O...
£11.32
Add:
C255250
VDL Double Union Ball Valve 50mm x 50mm Vdl ball valves are made to the highest standard. Made from PVC these are suitable for water, chemical and food use Made in Holland UPVC Suitable for food use EPDM O...
£27.56
Add:
VDL255263
VDL Double Union Ball Valve 63mm x 63mm Vdl ball valves are made to the highest standard. Made from PVC these are suitable for water, chemical and food use Made in Holland UPVC Suitable for food use EPDM O...
£41.70
Add:
C255290
Double Union Ball Valve 90mm x 90mm Vdl ball valves are made to the highest standard. Made from PVC these are suitable for water, chemical and food use Made in Holland UPVC Suitable for food use EPDM O...
£77.00
Add:
C7221010
Amos Dual Float Switch Used to either switch on or off in the vertical position Made in Italy 5 metre cable length
£42.24
Add:
CDGDL15100
Duragarden Drip Line 15cm Spaced Drippers 100 Metres In Length Pressure compensated Anti Siphon No Drain hose with a drip rate of 1.6 lph. This is an Italian made high quality thick walled drip pipe making it ideal for installation...
£140.55
Add:
CDGDL1525
Duragarden Drip Line 15cm Spaced Drippers 25 Metres In Length Pressure compensated Anti Siphon No Drain hose with a drip rate of 1.6 lph. This is an Italian made high quality thick walled drip pipe making it ideal for installation...
£39.96
Add:
CDGDL33100
Duragarden Drip Line 33cm Spaced Drippers 100 Metres In Length Pressure compensated Anti Siphon No Drain hose with a drip rate of 1.6 lph. This is an Italian made high quality thick walled drip pipe making it ideal for installation...
£96.79
Add:
CDGDL3325
Duragarden Drip Line 33cm Spaced Drippers 25 Metres In Length Pressure compensated Anti Siphon No Drain hose with a drip rate of 1.6 lph. This is an Italian made high quality thick walled drip pipe making it ideal for...
£29.03
Add:
CDGDL50100
Duragarden Drip Line 50cm Spaced Drippers 100 Metres In Length Pressure compensated Anti Siphon No Drain hose with a drip rate of 1.6 lph. This is an Italian made high quality thick walled drip pipe making it ideal for installation...
£84.69
Add:
CDGDL5025
Duragarden Drip Line 50cm Spaced Drippers 25 Metres In Length Pressure compensated Anti Siphon No Drain hose with a drip rate of 1.6 lph. This is an Italian made high quality thick walled drip pipe making it ideal for installation...
£26.61
Add:
C152120
Easy Filter In A Washer Simple to fit inside any 3/4" female threaded tap connector Protect spray heads timers and solenoid valves from large debri Washable stainless steel filter Use for micro drip systems and water timers connected...
£1.72
Add:
C380005
Economy Valve Box 6 inch
£4.59
Add:
ECO5000UNDERGROUND
Ecosure 5000 Litre Below Ground Tank Height 168 cm X Diameter 215cm Made from industrial strength MDPE (Medium Density Polyethylene), the 5000 ltr is a durable Water Tank, ideal for both domestic and commercial use, an extremely...
£2,369.65
Add:
4FIWF
£145.20
Add:
1049/0601
Eindor 1/2" Female BSP Cap - Female Eindor Fitting Converts vibro spin mini spin and mini foggers to 1/2 inch thread for stakes etc Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm water...
£0.73
Add:
CPAL10491006
Eindor 1/2 Inch Cap Male Outlet Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm water pipe. As a general rule the 6mm pipe can be run in lengths up to 20 metres before the pressure...
£0.88
Add:
EinM
6mm Eindor Female Outlet to Male 1/2" BSP Thread This Eindor fitting is often used on stakes or other items to raise certain makes of sprinkler above the plants. Eindor fittings are a simple to use push fit adapters to route the...
£0.44
Add:
CPAL10490602
Eindor 3/4 Inch Cap - Female Outlet Converts vibro spin mini spin and mini foggers to 3/4 inch thread for stakes etc Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm water pipe. As...
£0.60
Add:
C30510840
Eindor 40cm Stake The 40 cm stake will take the Pal stable sprayer directly or the Vibram sprayer with a stake head adaptor Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm water pipe. As a...
£0.65
Add:
PAL30510850
50cm Stake Suitable for Use With Bed Sprayers Using Eindor Fittings The Eindor compatible stake is available in either 40 or 50cm in height. The stake can be used with Eindor compatible fittings which include the pal sprayer....
£1.24
Add:
PAL30520060
Eindor Connection Tubing 60cm Length Connects stake head to header or supply tube 80cm long with Eindor Barbed Collar either end use with Eindor plunger Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm...
£0.56
Add:
PAL30520080
Eindor Connection Tubing 80cm Length Connects stake head to header or supply tube 80cm long with Eindor Barbed Collar either end use with Eindor plunger Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm...
£0.79
Add:
CPAL30591004
Eindor PLug For 3-4 mm Holes The blanking plug is used to plug holes up to 4mm in LDPE pipe work. This could be a damaged pipe or when a fitting is remopved from the LDPE supply pipe and this will block up the hole 6 bar...
£0.13
Add:
CPAL30591006
Eindor Plug For 5-6 mm Holes The blanking plug is used to plug holes up to 6mm in LDPE pipe work. This could be a damaged pipe or when a fitting is remopved from the LDPE supply pipe and this will block up the hole 6 bar...
£0.12
Add:
CPAL30560606
Eindor Male Connector - 6mm Flexible outside diameter pipe Eindor fittings are quite unique in how they fit together. Eindor fittings have a male and a female end. When the male end is pushed inside the female end it forms a...
£0.10
Add:
CPAL30540006
Eindor 6mm Pipe Adapter to Eindor Fitting The Eindor pipe adapter is used to insert in to the LDPE supply pipe. The barbed section is broader and the Eindor end is a female Eindor. You would punch a 3mm hole using a pipe punch in to the LDPE...
£0.22
Add:
KECAP
Eindor Blanking Cap For Male Eindor End This cap can be used to cap off the male end of an Eindor Fitting. The cap is pushed over the end of the fitting and makes a friction fit. Once fitted the cap is rated to 4 bar and can...
£0.10
Add:
CPAL30581006
Eindor Blanking Cap Fits Female Eindor This simple plug fits inside the female Eindor fitting. The plug is used to stop off when drip or spray areas are not being used Simple to use and very quick to remove when the fitting is...
£0.15
Add:
CPAL30610606
Eindor Female Connector This connection will join the male Eindor ends together. This friction fit fitting makes working with micro pipe simple and above all flexible 6 bar rated Friction fit Made in the EU
£0.15
Add:
C30620606
Eindor Double Joiner To Join To Female Eindor Fittings Together This simple joint can be used to extend 6mm pipe without removing the Eindor Fitting
£0.20
Add:
CPAL30630606
Eindor Mini Tap 1 End Male 1 End Female The Eindor mini tap is ideal regulating flow or shutting off areas. The tap is made in Greece from the highest quality materials making this i a durable irrigation product. The ends are set...
£0.80
Add:
KEM
Eindor Nozzle Adapter 6mm F outlet Adapts Vibro-spin, Mini-spin, Mini-fogger nozzles to 1/2" F thread. Eindor fittings are a simple to use push fit adapters to route the 6mm water pipe. As a general rule the 6mm pipe can be run in...
£0.60
Add:
1054/0038
Eindor Sprinkler Adapter 3/8" W Thread (Pack 10) Adapts Vibro-Spin, Mini-Fogger and Mini-Spin Sprinkler heads to 3/8" W threads 6 mm female outlet
£3.07
Add:
CPAL30530008
Eindor Stake Head 8mm Stake For 8mm outside diameter stakes Allows 6mm male sprinklers to be attached to stakes Use with Endor Stake Pressure tested to 90psi Push on to the Stake and then push one end of the eindor lead in to the bottom and then...
£0.15
Add:
CPAL40680666
Eindor Tee Female Ends Eindor Tees are probably not used very often in the domestic garden. The Tee will accept the female ends and once inserted they will withstand pressures up to 90 psi. If you are looking to Tee 6mm pipe then we would...
£0.36
Add:
E226000
Hose Adaptor 10 mm x 3/8" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.26
Add:
E226001
Hose Adaptor 13 mm x 1/2" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.52
details Sold Out
C226013
Hose Adaptor 20 mm x 1" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£3.27
Add:
C226012
Hose Adaptor 20 mm x 3/4" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.36
Add:
C226023
Hose Adaptor 25 mm x 1" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.67
Add:
C226034
Hose Adaptor 32 mm x 11/4" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£4.47
Add:
C226038
Hose Adaptor 38 mm x 11/2" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£4.78
Add:
C226045
Hose Adaptor 40 mm x 11/2" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£4.78
Add:
C226056
Hose Adaptor 50mm x 2" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£6.31
Add:
3121/0013
Foldover Stopend for 13mm inside diameter pipe Just slip through the first hole and fold back in to the second hole forming a water tight seal Pressure tested to 90 psi Very simple to install Made In The Eu
£0.22
Add:
C31210016
16mm Foldover stopend The foldover stopend is probably the most simple and reliable end to a p16 mm LDPE water pipe. It is quick to fit and above all is totally reliable as it is impossible for it to push off the end of the pipe. ...
£0.18
Add:
C31210020
20 mm Foldover Stopend The foldover stopend is probably the most positive stopend available for 20mm LDPE pipe when using a push fit system. Foldover stopends are quicker to use than the push fit end stops plus they are more reliable as they...
£0.18
Add:
C34G47019
Galconette Jewel Controller A user-friendly battery operated 1-station automatic controller is ideal for irrigation control, including inside a valve box. Screws directly on to a 3/4 inch BSP Outdoor Bibtap Weekly Program Irrigation duration from...
£93.57
Add:
C34GBT7125
Galcon Blutooth Jewel Single Station Control Program and manual operation from a smart phone Intuitive and easy programming Download Galcon App Works with 1 x 9 volt battery Completley waterproof ( IP68) Working pressure 1 -...
£110.46
details Sold Out
64TO00
£5.82
Add:
GAR1197
Gardena Automatic Water Distributor In combination with a GARDENA Water Computer MasterControl or MasterControl solar (Art. No. 1864, 1866), the GARDENA Water Distributor automatic ensures that up to six different areas in your garden are...
£224.37
details Sold Out
C13010
Gardena Starter Set For Rows 15 Metres The GARDENA Micro-Drip-System Starter Set Planted Rows S is used for the convenient and water-saving root irrigation of small rows of plants and for sensitive useful and ornamental plants (e.g. tomatoes)....
£10.99
Add:
PTFEtape
Gas Grade PTFE Threaded Joint Tape Extra thick gas grade PTFE threaded joint tape Used to seal threaded joints under high water pressure Simply wrap threads and then tighten on the fittings
£1.89
Add:
MEG0400102
Brass Gate Valve 1" BSP Female Thread The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and...
£12.50
Add:
MEG400100
Gate Valve 1/2" Bsp Female Thread The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and...
£7.25
Add:
MEG0400104
Brass Gate Valve 11/2"" BSP Female Thread The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of...
£24.71
Add:
MEG400103
Brass Gate Valve 11/4" BSP Female Thread The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of...
£18.27
Add:
MEG400105
Brass Gate Valve 2" BSP Female Thread The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid...
£36.95
Add:
MEG400106
Brass Gate Valve 21/2" BSP Female Thread The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of...
£61.00
Add:
MEG400107
Brass Gate Valve 3" BSP Female Thread The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid...
£95.88
Add:
MEG400101
Gate Valve 3/4" Bsp Female Thread The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and...
£8.97
Add:
MEG400108
Brass Gate Valve 4" BSP Female Thread The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid...
£155.72
details Sold Out
E136032
Genuine Geka Claw Fitting 11/4"Female Threaded Fitting Industrial grade hose fittings 90° Twist lock Suitable for high or low pressure Rubber Seals Are available Strict quality controls and 5 year guarantee on main body:...
£3.60
Add:
E136022
Geka Type Female Threaded Fittings Industrial grade hose fittings 90° Twist lock Suitable for high pressure Rubber Seals Are available Strict quality controls and 5 year guarantee on main body: maximum reliability 7/8" BSP is a very...
£4.32
Add:
E136040
Genuine Geka Claw Fitting 11/2" Female Threaded Fitting Industrial grade hose fittings 90° Twist lock Suitable for high or low pressure Rubber Seals Are available Strict quality controls and 5 year guarantee on main body:...
£6.48
Add:
C139000
Geka Spare Rubber Seals (Pack of 10) To fit all Geka Fittings
£4.82
Add:
C136025
Genuine Geka Claw Hose Fittings 1" Female BSP Thread Industrial grade hose fittings 90° Twist lock Suitable for high or low pressure Rubber Seals Are available Strict quality controls and 5 year guarantee on main body: maximum...
£3.55
Add:
E137012
Geka Type Male Threaded Hose Fitting 1/2" BSP Male Thread A very durable Industrial grade hose fitting suitable for any Geka style attachments often used in commercial environments though equally suitable as an alternative to traditional home...
£3.48
Add:
E136012
Genuine Geka Geka Claw Fitting 1/2" BSP Female Thread Industrial grade hose fittings 90° Twist lock Suitable for high pressure Rubber Seals Are available Strict quality controls and 5 year guarantee on main body: maximum...
£3.72
Add:
E137006
Geka Type Male Threaded Hose Fitting 1/4" BSP Male Thread A very durable Industrial grade hose fitting suitable for any Geka style attachments often used in commercial environments though equally suitable as an alternative to traditional home...
£6.00
Add:
E136019
Genuine Geka Claw Fitting 3/4" Female Thread A durable industrial grade hose fitting. Made in Italy from high quality Italian Brass 90º Twist Lock and Seal Replaceable rubber seals High flow open bore For more...
£3.60
Add:
C152150
Geka 3/4" Metal Tap with Male and Female Threads Replacement Butterfly valve
£8.99
Add:
E137010
Geka Type Male Threaded Hose Fitting 3/8" BSP Male Thread A very durable Industrial grade hose fitting suitable for any Geka style attachments often used in commercial environments though equally suitable as an alternative to traditional home...
£6.00
Add:
E136010
Genuine Geka Geka Claw Fitting 3/8" BSP Female Thread Industrial grade hose fittings 90° Twist lock Suitable for high pressure Rubber Seals Are available Strict quality controls and 5 year guarantee on main body: maximum...
£2.52
Add:
CBQ039486
Geka Aquajet 6 Pattern Metal Spray Gun With Rubber Grip The Aquajet 6 pattern metal spray gun offers a fully adjustable flow rate via the handy rubber trigger and all the spray types that can be selected by rotating the nozzle. Made in...
£18.69
details Sold Out
C039470
Aluminium Pistol With Adjustable Nozzle and Trigger Control The Aquajet aluminium spray gun offers various spray intensities suitable for cleaner to watering. This simple tough water nozzle is ideal for most applications from cleaning...
£26.82
Add:
E138000
Genuine Geka Claw Fitting Blanking Cap This high quality brass 'twist and lock' blanking cap is designed to stop water flow from coupling outlets that aren’t in use. Suitable for use within temperature ranges of -30 to 100 degrees...
£3.84
details Sold Out
u682725
Geka Galvanised Sled Base 1" BSP Male Threads ( This now comes with Geka and standard hose connector plus the adaptors to 3/4" and 1/2" Female threads for the outlet) A very simple well constructed sled base offering...
£35.09
Add:
E135012
Genuine Geka Hose Tail for 12 mm or half inch internal diameter hose pipes The Geka Claw fitting is probably the most durable hose fitting on the market. The fitting has a large internal diameter which reduce the restriction that is...
£3.60
Add:
C105010
Genuine Geka Hose Tail for 3/8" internal diameter hose pipes The Geka Claw fitting is probably the most durable hose fitting on the market. The fitting has a large internal diameter which reduce the restriction that is often found in...
£5.53
Add:
E135016
Geka Claw Hose Tail For 5/8" Hose Pipe This Geka style fitting is to fit 5/8" Internal diameter hose pipe. This size of hose is very unusual in the UK however some European suppliers like Claber do supply a 5/8" hose pipe....
£4.80
Add:
E135025
Genuine Geka Hose Tail Sizes 1" Hose pipes Industrial grade hose fittings 90° Twist lock Suitable for high pressure Rubber Seals are available Will require jubilee clips 1 per fitting Made in Germany Strict quality controls and 5 year...
£4.68
Add:
E135040
Genuine Geka Hose Tail 11/2" Inside diameter Hose Industrial grade hose fittings 90° Twist lock Suitable for high water pressures Replacement Rubber Seals are available Will require jubilee clips 1 per fitting ...
£8.28
Add:
E135032
Genuine Geka Hose Tail 11/4" Inside diameter Hose Industrial grade hose fittings 90° Twist lock Suitable for high water pressures Replacement Rubber Seals are available Will require jubilee clips 1 per fitting ...
£5.88
Add:
E135019
Genuine Geka Hose Tail Sizes 3/4" Hose pipes Geka Claw Hose tails suitable for 3/4" or 19 mm internal diameter hose pipe. These high quality German made brass hose fittings are ideal for large diameter hoses because of the low...
£3.84
Add:
C154200
Geka Industrial Spray Pistol The Geka Industrial Spray pistol is a very heavy duty spray gun which is ideal in areas of high use or uncared for. The made body is cast in European made brass. All operating parts are metal. O ring seals...
£59.40
Add:
E137025
Genuine Geka Claw Hose Fitting 1" Male BSP Thread Industrial grade hose fittings 90° Twist lock Suitable for high pressure Rubber Seals Are available Strict quality controls and 5 year guarantee on main body:...
£3.84
Add:
E137040
Genuine Geka Claw Hose Fitting 11/2" Male BSP Thread Industrial grade hose fittings 90° Twist lock Suitable for high pressure Rubber Seals Are available Strict quality controls and 5 year guarantee on main body:...
£5.52
Add:
E137032
Genuine Geka Claw Hose Fitting 11/4" Male BSP Thread Industrial grade hose fittings 90° Twist lock Suitable for high pressure Rubber Seals Are available Strict quality controls and 5 year guarantee on main body:...
£4.68
Add:
E137019
Genuine Geka Male Threaded Fittings 3/4" Industrial grade hose fittings Made In Germany 90° Twist lock Suitable for high pressure Rubber Seals Are available Strict quality controls and 5 year guarantee on main body: maximum...
£3.48
Add:
BQ039476
Aquajet Metal Spray Gun The Aquajet metal spray gun offers various spray intensities suitable for cleaner to watering. This simple tough water nozzle is ideal for mots applications from cleaning cars etc to watering plants Made In...
£10.12
details Sold Out
C152012
Geka Metal Soft As Rain Lance 120cm The Geka metal lance comes complete with Geka fitting and a fine spray rose. The sprayer has a high flow tap with very little restriction which makes sure that the maximum pressure and volume is...
£63.51
details Sold Out
C152004
Geka Metal Soft As Rain Lance 40cm The Geka metal lance comes complete with Geka fitting and a fine spray rose. The sprayer has a high flow tap with very little restriction which makes sure that the maximum pressure and volume is...
£43.95
Add:
C152000
Geka Metal Soft As Rain Lance 60cm The Geka metal lance comes complete with Geka fitting and a fine spray rose. The sprayer has a high flow tap with very little restriction which makes sure that the maximum pressure and volume is...
£46.88
details Sold Out
C152009
Geka Metal Soft As Rain Lance 90cm The Geka metal lance comes complete with Geka fitting and a fine spray rose. The sprayer has a high flow tap with very little restriction which makes sure that the maximum pressure and volume is...
£50.69
Add:
GEK156500
Telescopic lance retracted 1.6 metres Extends up to 2.8 Metres Ideal for watering hanging baskets Nozzle angle 135° Strong aluminium shaft High flow fine as rain rose Comes with Geka quick releases adapter Integral filter with tap/ flow...
£144.38
Add:
E038612
Geka Type Easy-Fit Hosetail for 1/2 inch Hose Industrial grade hose fittings 90° Twist lock Suitable for high or low pressure Strict quality controls and 5 year guarantee on main body: maximum reliability
£8.48
Add:
C038719
Geka Type Easy-Fit Hosetail for 3/4 inch Hose Industrial grade hose fittings 90° Twist lock Suitable for high or low pressure Rubber Seals Are available (Art No. FGRS) Strict quality controls and 5 year guarantee on main body:...
£8.80
Add:
E139505
Geka Type Y Piece Connector Industrial grade hose fittings 90° Twist lock Suitable for high or low pressure Rubber Seals Are available Splits main supply On long runs use 1 inch hose to the Y and 3/4 inch hose at the branch. Strict...
£18.84
Add:
CJUB230016N
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£0.90
Add:
CJUB230020N
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£0.91
Add:
JUB230022N
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.04
Add:
C230025N
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.02
Add:
CJUB230030N
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.15
Add:
CJUB230035N
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.13
Add:
CJUB230040N
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.18
Add:
CJUB230050
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.24
Add:
JUB230055N
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.29
details Sold Out
CJUB230060
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.37
Add:
CJUB230070
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.48
details Sold Out
CJUB230080
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.63
details Sold Out
CJUB230090
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.72
Add:
CJUB2300100
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£1.90
Add:
CJUB230012N
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£0.89
Add:
CJUB2300120
Genuine Jubilee Mild Steel Zinc Plated Clips Genuine Jubilee clips are made in the UK using the highest quality materials. The Genuine Jubilee clip is much stronger than copies and so greater pressure can be applied to the worm drive without...
£2.15
Add:
C760711
Pressure Gauge with Rear 1/4" BSP Male Thread 0-10 bar High quality oil filled pressure gauge Measures pressure from 1 - 10 bar Diameter 63mm Rear 1/4" male thread How to convert Bar to Psi :- Bar Pressure X 14.5...
£10.56
details Sold Out
PAL30640037GH
Greenhouse Distribution Pipe Support Hold the greenhouse pipe in place and makes sure that the plants receive the water that they need Height - 15cms
£1.58
Add:
DRIPGHK10X6
Drip Irrigation Kit For A 10 foot X 6 foot Greenhouse This is a very simple starter kit which will fit in to a 10 x 6 greenhouse. It includes a selection of fittings including a connector that you can clip to a hose pipe or to an outside tap...
£71.49
Add:
DRIPGHK6x2
Drip Irrigation Kit For A 6 foot X 2 foot Greenhouse This is a very simple starter kit which will fit in to a 6 x 2 greenhouse. It includes a sample of fittings that will be used including a connector that you can clip to a hose pipe or to an...
£14.29
Add:
DRIPGHK6X4
Drip Irrigation Kit For A 6 foot X 4 foot Greenhouse This is a very simple starter kit which will fit in to a 6 x 4 greenhouse. It includes a selection of fittings including a connector that you can clip to a hose pipe or to an outside tap or...
£28.49
Add:
DRIPGHK8X4
Drip Irrigation Kit For A 8 foot X 4 foot Greenhouse This is a very simple starter kit which will fit in to a 8 x 4 greenhouse. It includes a selection of fittings including a connector that you can clip to a hose pipe or to an outside tap or...
£37.39
Add:
DRIPGHK8X6
Drip Irrigation Kit For A 8 foot X 6 foot Greenhouse This is a very simple starter kit which will fit in to a 8 x 6 greenhouse. It includes a sample of fittings that will be used including a connector that you can clip to a hose pipe or to an...
£57.19
Add:
COOLNETFOGGERKIT
Greenhouse Misting Kit Using Coolnet Foggers This is a very simple kit to install and it uses the industry leading mister called a Coolnet Foggers. Coolnet Foggers produce a mist which mists the water droplets at a 50 micron diameter. ...
£23.64
Add:
C31100016
Plastic Support Hooks For Greenhouses, Poly tunnels and Fruit Cages The plastic support hooks is used to hold pipe up high via a stretched wire so that the pipe is supported so that supply pipes are up in the air and out of the way Made...
£0.21
details Sold Out
C31100020
Plastic Support Hooks For Greenhouses, Poly tunnels and Fruit Cages The plastic support hooks is used to hold pipe up high via a stretched wire so that the pipe is supported so that supply pipes are up in the air and out of the way Made...
£0.24
Add:
C311100025
Plastic Support Hooks For Greenhouses, Poly tunnels and Fruit Cages The plastic support hooks is used to hold pipe up high via a stretched wire so that the pipe is supported so that supply pipes are up in the air and out of the way Made...
£0.29
details Sold Out
C811232
Plastic Support Hooks For Greenhouses, Poly tunnels and Fruit Cages The plastic support hooks is used to hold pipe up high via a stretched wire so that the pipe is supported so that supply pipes are up in the air and out of the way Made...
£0.30
Add:
180SPRAY4070
Greenhouse Bed sprayer complete 180 degrees This simple kit includes all the parts needed to install a simple spray watering system in the greenhouse. 180 degree nozzle for even water ditribution 1 or 1.5 metre metre radius...
£16.09
details
SPRAYGHK10X6
Spray Irrigation Kit For A 10 foot X 6 foot Greenhouse This is a very simple starter kit which will fit in to a 10 x 6 greenhouse. It includes a selection of fittings including a connector that you can clip to a hose pipe or to an...
£281.59
Add:
SPRAYGHK6X4
Spray Irrigation Kit For A 6 foot X 4 foot Greenhouse This is a very simple starter kit which will fit in to a 6 x 4 greenhouse. It includes a selection of fittings including a connector that you can clip to a hose pipe or to an outside...
£16.49
Add:
SPRAYGHK8X6
Spray Irrigation Kit For A 8 foot X 6 foot Greenhouse This is a very simple starter kit which will fit in to a 8 x 6 greenhouse. It includes a selection of fittings including a connector that you can clip to a hose pipe or to an outside...
£21.99
Add:
CHANNTTC10
Hansen 1" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that fit either side of the tank making a good waterproof...
£10.51
Add:
CHANNTTC05
Hansen 1/2" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that fit either side of the tank making a good waterproof...
£7.26
Add:
CHANNTTC15
Hansen 11/2" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that fit either side of the tank making a good...
£19.15
Add:
CHANNTTC12
Hansen 11/4" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that fit either side of the tank making a good...
£13.98
Add:
cHANNTTC20
Hansen 2" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that fit either side of the tank making a good waterproof...
£23.36
Add:
CHANNTTC30
Hansen 3" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that fit either side of the tank making a good waterproof...
£86.26
Add:
CHANNTTC07
Hansen 3/4" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that fit either side of the tank making a good waterproof...
£8.03
Add:
CHANNTTC40
Hansen 4" BSP Tank Connector The Hansen tank connector is made from Nylon giving unequalled durability and strength in the field. The Fittings comes with 2 rubber sealing washers that fit either side of the tank making a good waterproof...
£106.10
Add:
C25N5519
Hansen Hi Flow Ball Valve 3/4" BSP Female Thread Made from Glass Reinforced Nylon WRAS Approved Ball Made from Polypropylene Ball Seats and Stem made from durable Acetal Seals Nitrile rubber
£22.00
Add:
C737220
Hansen Tank Level indicator This is a great way to monitor tank level in a very visual way. The yellow ball will rise as teh water level inside the tank rises offering a very clear and obvious assesment Tank Level Alert Indicator...
£177.01
Add:
C737010
Hansen Leveller Valve Enables you to set a minimum/maximum water level when filling your tank The Hansen Leveller valve enables you to set a maximum and a minimum fill level to your tank. This is a great product to use on your mains or...
£114.97
Add:
C737230
Hansen Rain Releif Valve This valve is used with rainwater harvesting tanks. Rain harvesting and only pump when you need to. Unrestricted full flow up to 1275 l/min at 12 Bar. Prevent dry tank syndrome. Maintains a minimum water...
£166.78
Add:
HANNTBR1005
Hansen Glass Reinforced Nylon Reducing Bush 1"BSP Male - 1/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are...
£1.74
Add:
HANNTBR1007
Hansen Glass Reinforced Nylon Reducing Bush 1"BSP Male - 3/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are...
£1.70
Add:
HANNTBR0502
Hansen Glass Reinforced Nylon Reducing Bush 1/2"BSP Male - 1/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are...
£1.63
Add:
HANNTBR1510
Hansen Glass Reinforced Nylon Reducing Bush 11/2"BSP Male - 1" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are...
£2.80
Add:
HANNTBR1512
Hansen Glass Reinforced Nylon Reducing Bush 11/2"BSP Male - 11/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are...
£3.56
Add:
HANNTBR1507
Hansen Glass Reinforced Nylon Reducing Bush 11/2"BSP Male - 3/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are...
£2.60
details Sold Out
HANNTBR1210
Hansen Glass Reinforced Nylon Reducing Bush 11/4"BSP Male - 1" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are...
£2.58
Add:
HANNTBR2010
Hansen Glass Reinforced Nylon Reducing Bush 2"BSP Male - 1" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough...
£3.62
Add:
CNTBR2015
Hansen Glass Reinforced Nylon Reducing Bush 2"BSP Male - 11/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are...
£3.63
Add:
HANNTBR3020
Hansen Glass Reinforced Nylon Reducing Bush 3"BSP Male - 2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough...
£13.55
details Sold Out
HANNTBR0705
Hansen Glass Reinforced Nylon Reducing Bush 3/4"BSP Male - 1/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are...
£1.35
details Sold Out
HANNTBR4030
Hansen Glass Reinforced Nylon Reducing Bush 4"BSP Male - 3" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough...
£20.07
details Sold Out
CNTNR1005
Hansen Glass Reinforced Nylon Reducing Nipple 1"- 1/2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£1.25
Add:
CNTNR1007
Hansen Glass Reinforced Nylon Reducing Nipple 1"- 3/4" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£1.15
details Sold Out
HANNTNR1510
Hansen Glass Reinforced Nylon Reducing Nipple 11/2"- 1" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£2.03
Add:
HANNTNR1512
Hansen Glass Reinforced Nylon Reducing Nipple 11/2"- 11/4" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£2.03
details Sold Out
HANNTNR1210
Hansen Glass Reinforced Nylon Reducing Nipple 11/4"- 1" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£1.76
Add:
HANNTNR2010
Hansen Glass Reinforced Nylon Reducing Nipple 2"- 1" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£2.67
Add:
HANNTNR2015
Hansen Glass Reinforced Nylon Reducing Nipple 2"- 11/2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£2.67
Add:
HANNTNR3020
Hansen Glass Reinforced Nylon Reducing Nipple 3"- 2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£16.67
details Sold Out
HANNTNR0705
Hansen Glass Reinforced Nylon Reducing Nipple 3/4"- 1/2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£1.18
Add:
HANNTNR4030
Hansen Glass Reinforced Nylon Reducing Nipple 4"- 3" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£24.61
details Sold Out
HANNTSR1007
Hansen Glass Reinforced Nylon Reducing Socket 1"- 3/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£2.27
Add:
HANNTSR1510
Hansen Glass Reinforced Nylon Reducing Socket 11/2"- 1" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£3.63
Add:
CNTSR1512
Hansen Glass Reinforced Nylon Reducing Socket 11/2"- 11/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough...
£3.63
Add:
HANNTSR1210
Hansen Glass Reinforced Nylon Reducing Socket 11/4"- 1" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£2.83
details Sold Out
HANNTSR2010
Hansen Glass Reinforced Nylon Reducing Socket 2"- 1" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£4.88
Add:
HANNTSR2015
Hansen Glass Reinforced Nylon Reducing Socket 2"- 11/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£5.42
Add:
HANNTSR3020
Hansen Glass Reinforced Nylon Reducing Socket 3"- 2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£28.20
Add:
HANNTSR3025
Hansen Glass Reinforced Nylon Reducing Socket 3"- 21/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£28.20
Add:
HANNTSR0705
Hansen Glass Reinforced Nylon Reducing Socket 3/4"- 1/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£1.79
Add:
HANNTSR4030
Hansen Glass Reinforced Nylon Reducing Socket 4"- 3" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and...
£41.31
Add:
HANNTC10
Hansen Glass Reinforced Nylon Cap 1" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.54
Add:
HANNTC05
Hansen Glass Reinforced Nylon Cap 1/2" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.10
Add:
HANNTC15
Hansen Glass Reinforced Nylon Cap 11/2" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£2.77
Add:
HANNTC12
Hansen Glass Reinforced Nylon Cap 11/4" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£2.29
Add:
HANNTC20
Hansen Glass Reinforced Nylon Cap 2" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£3.46
Add:
HANNTC30
Hansen Glass Reinforced Nylon Cap 3" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£14.30
details Sold Out
HANNTC07
Hansen Glass Reinforced Nylon Cap 3/4" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.25
Add:
HANNTC40
Hansen Glass Reinforced Nylon Cap 4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£32.07
details Sold Out
CHANNTEFF10
Hansen Glass Reinforced Nylon Elbow 1" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£3.08
details Sold Out
HANNTEMF10
Hansen Glass Reinforced Nylon Elbow 1" BSP Male - Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£2.85
Add:
HANNTEFF05
Hansen Glass Reinforced Nylon Elbow 1/2" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£2.11
Add:
HANNTEMF05
Hansen Glass Reinforced Nylon Elbow 1/2" BSP Male - Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£2.11
Add:
HANNTEFF15
Hansen Glass Reinforced Nylon Elbow 11/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£3.88
Add:
CNTEMF15
Hansen Glass Reinforced Nylon Elbow 11/2" BSP Male - Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£4.25
Add:
HANNTEFF12
Hansen Glass Reinforced Nylon Elbow 11/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£3.08
Add:
CNTEMF12
Hansen Glass Reinforced Nylon Elbow 11/4" BSP Male - Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£4.34
details Sold Out
HANNTEFF20
Hansen Glass Reinforced Nylon Elbow 2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£5.56
Add:
HANNTEMF20
Hansen Glass Reinforced Nylon Elbow 2" BSP Male - Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£6.05
Add:
HANNTEFF30
Hansen Glass Reinforced Nylon Elbow 3" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£52.53
details Sold Out
HANNTEFF07
Hansen Glass Reinforced Nylon Elbow 3/4" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£2.37
Add:
HANNTEMF07
Hansen Glass Reinforced Nylon Elbow 3/4" BSP Male - Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£2.22
details Sold Out
HANNTEFF40
Hansen Glass Reinforced Nylon Elbow 4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£65.66
details Sold Out
HANNTN10
Hansen Glass Reinforced Nylon Nipple 1" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.22
details Sold Out
CNTN05
Hansen Glass Reinforced Nylon Nipple 1/2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£0.80
Add:
HANNTN15
Hansen Glass Reinforced Nylon Nipple 11/2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.96
Add:
HANNTN12
Hansen Glass Reinforced Nylon Nipple 11/4" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.91
Add:
HANNTN20
Hansen Glass Reinforced Nylon Nipple 2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£2.61
Add:
CHANNTN25
Hansen Glass Reinforced Nylon Nipple 21/2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£11.96
Add:
HANNTN30
Hansen Glass Reinforced Nylon Nipple 3" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£16.44
details Sold Out
HANNTN07
Hansen Glass Reinforced Nylon Nipple 3/4" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.03
Add:
HANNTN40
Hansen Glass Reinforced Nylon Nipple 4" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£23.94
details Sold Out
CNTP10
Hansen Glass Reinforced Nylon Plug 1" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£0.90
Add:
HANNTP05
Hansen Glass Reinforced Nylon Plug 1/2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£0.76
Add:
HANNTP15
Hansen Glass Reinforced Nylon Plug 11/2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.25
Add:
HANNTP12
Hansen Glass Reinforced Nylon Plug 11/4" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.00
Add:
CNTP20
Hansen Glass Reinforced Nylon Plug 2" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.80
Add:
HANNTP30
Hansen Glass Reinforced Nylon Plug 3" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£11.94
details Sold Out
HANNTP07
Hansen Glass Reinforced Nylon Plug 3/4" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£0.68
Add:
HANNTP40
Hansen Glass Reinforced Nylon Plug 4" BSP Male Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£30.04
details Sold Out
HANNTS05
Hansen Glass Reinforced Nylon Socket 1/2" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£1.35
Add:
HANNTS15
Hansen Glass Reinforced Nylon Socket 11/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£3.53
Add:
HANNTS12
Hansen Glass Reinforced Nylon Socket 11/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£2.83
Add:
HANNTS20
Hansen Glass Reinforced Nylon Socket 2" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£4.89
Add:
HANNTS30
Hansen Glass Reinforced Nylon Socket 3" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£29.24
Add:
CNTS07
Hansen Glass Reinforced Nylon Socket 3/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£1.89
Add:
HANNTS40
Hansen Glass Reinforced Nylon Socket 4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£40.32
Add:
CNTT10
Hansen Glass Reinforced Nylon Tee 1" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£3.31
Add:
CNTT05
Hansen Glass Reinforced Nylon Tee1/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£2.37
Add:
HANNTT15
Hansen Glass Reinforced Nylon Tee 11/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£4.91
Add:
HANNTT12
Hansen Glass Reinforced Nylon Tee 11/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£4.04
Add:
HANNTT20
Hansen Glass Reinforced Nylon Tee 2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£7.25
Add:
HANNTT25
Hansen Glass Reinforced Nylon Tee 21/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£55.13
details Sold Out
HANNTT30
Hansen Glass Reinforced Nylon Tee 3" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£65.14
details Sold Out
HANNTT07
Hansen Glass Reinforced Nylon Tee 3/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£2.85
Add:
HANNTT40
Hansen Glass Reinforced Nylon Tee 4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£82.30
details Sold Out
HANNTU10
Hansen Glass Reinforced Nylon Union 1" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£14.33
Add:
HANNTU05
Hansen Glass Reinforced Nylon Union 1/2" BSP FemaleThread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£6.65
Add:
HANNTU15
Hansen Glass Reinforced Nylon Union 11/2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£21.90
Add:
HANNTU12
Hansen Glass Reinforced Nylon Union 11/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with...
£20.17
Add:
HANNTU20
Hansen Glass Reinforced Nylon Union 2" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£26.64
details Sold Out
HANNTU07
Hansen Glass Reinforced Nylon Union 3/4" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£15.03
Add:
HANNTS10
Hansen Glass Reinforced Nylon Socket 1" BSP Female Thread The Hansen range of glass reinforced Nylon fittings offer a marvellous non degrading option to the Galvanised metal fittings. The fittings are tough and durable with precise...
£2.31
Add:
C521500
Heavy Duty Hose Hanger A heavy duty wall mounted hose hanger for quick hose storage. The hanging offer a super quality steel product that will withstand the heavy use associated with the commercial environment Made in Italy High...
£58.17
details Sold Out
HGC52AG3025
Heavy Duty Hose Reel With High Capacity Drum This large capacity hose reel will hold up to 120 metres of 1" hose. The frame and reel are made from powder coated steel and tyres are inflatable rubber to make pushing and pulling over...
£558.36
Add:
CBTAPDCV12VO
Heavy Duty Brass Outdoor Garden Tap With Vertical Outlet 1/2" BSP Male Threaded Inlet 3/4" Thread on the Outlet This is a heavy duty outdoor Bibtap with a vertical outlet which makes it much neater when attaching tap splitters or...
£26.29
Add:
CSC2400112
Heavy Duty Single Bolt Super Clamp 106-112mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£3.43
Add:
CSC2400121
Heavy Duty Single Bolt Super Clamp 113-121mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£3.47
Add:
CSC2400139
Heavy Duty Single Bolt Super Clamp 131-139mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£4.67
Add:
CSC2400148
Heavy Duty Single Bolt Super Clamp 140-148mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£4.74
Add:
CSC2400161
Heavy Duty Single Bolt Super Clamp 149-161mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£4.96
Add:
CSC2400174
Heavy Duty Single Bolt Super Clamp 162-174mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£5.28
Add:
CSC2400187
Heavy Duty Single Bolt Super Clamp 175-187mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£5.35
Add:
CSC2400213
Heavy Duty Single Bolt Super Clamp 201-213mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£6.07
Add:
CSC240031
Heavy Duty Single Bolt Super Clamp 29-31mm The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose or...
£1.25
details Sold Out
CSC240035
Heavy Duty Single Bolt Super Clamp 32-35mm The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose or...
£1.57
Add:
CSC240039
Heavy Duty Single Bolt Super Clamp 36-39mm The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose or...
£1.87
Add:
CSC240043
Heavy Duty Single Bolt Super Clamp 40-43mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction...
£1.69
Add:
CSC240051
Heavy Duty Single Bolt Super Clamp 48-51mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£2.11
Add:
CSC240055
Heavy Duty Single Bolt Super Clamp 52-55mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£2.15
Add:
CSC240059
Heavy Duty Single Bolt Super Clamp 56-59mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£2.24
Add:
CSC240063
Heavy Duty Single Bolt Super Clamp 60-63mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£2.27
Add:
CSC240073
Heavy Duty Single Bolt Super Clamp 68-73mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£2.84
Add:
CSC240085
Heavy Duty Single Bolt Super Clamp 80-85mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£3.12
Add:
CSC240091
Heavy Duty Single Bolt Super Clamp 86-91mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£3.35
Add:
CSC240097
Heavy Duty Single Bolt Super Clamp 92-97mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£3.39
Add:
CSC2400103
Heavy Duty Single Bolt Super Clamp 98-103mm O/D The heavy duty single bolt super clamp is an ideal fixing for flexible suction or pressure hoses. The fittings are very precise so make sure that you order the correct size for your suction hose...
£3.42
Add:
LWM521320
Heavy Duty Wall Mounted Hose Reel This is a heavy duty wall mounted hose reel suitable for heavy domestic/ commercial use. This rell is manufactured from high quality tubular steel with Italian made high quality brass fittings. The...
£211.19
details Sold Out
SWM521310
Heavy Duty Wall Mounted Hose Reel Will Hold 50 Metres 1/2" Hose A well engineered wall mounted tubular steel hose reel powder coated finish complete with 1/2" hose connectors Italian made Can be left outside all year...
£182.02
details Sold Out
WMS522510
Heavy Duty Wall Mounted Swivel Hose Reel Capacity 50 metres of 1/2" Hose Pipe Made in Italy from welded steel a swivel wall hose reel with 1/2" connector The best hose reel on the market that is wall mounted Can be left outside all...
£224.85
details Sold Out
SW813505
High Tensile Straining Wire 130 Metre Length Used to support over head pipe work in greenhouses and tunnels
£30.25
Add:
CHT813302
Wire Strainer Number 2 Used to tension support wires in polytunnels and greenhouses
£1.74
Add:
C880503
Heavy Duty Manual 3mm Hole Punch With Fitting Insertion Tool
£14.22
Add:
C228005
Hose Adaptor Elbow 12 mm x 1/2" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of...
£2.95
Add:
C227005
Hose Adaptor Elbow 12 mm x 1/2" BSP MaleThread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.08
Add:
C227007
Hose Adaptor Elbow 12 mm x 3/4" BSP MaleThread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.20
Add:
C227011
Hose Adaptor Elbow 20 mm x 1/2" BSP MaleThread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.41
Add:
C228012
Hose Adaptor Elbow 20 mm x 3/4" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of...
£3.66
Add:
C227012
Hose Adaptor Elbow 20 mm x 3/4" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.36
Add:
C228023
Hose Adaptor Elbow 25 mm x 1" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter...
£3.98
Add:
C227023
Hose Adaptor Elbow 25 mm x 1" BSP MaleThread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.87
Add:
C227022
Hose Adaptor Elbow 25 mm x 3/4" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.83
Add:
C228034
Hose Adaptor Elbow 32 mm x 11/4" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of...
£5.18
Add:
C227034
Hose Adaptor Elbow 32 mm x 11/4" BSP MaleThread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£3.83
Add:
C228045
Hose Adaptor Elbow 40 mm x 11/2" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of...
£7.28
Add:
C227045
Hose Adaptor Elbow 40 mm x 11/2" BSP MaleThread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£4.42
Add:
C228056
Hose Adaptor Elbow 50 mm x 2" BSP Female Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£10.06
Add:
C227056
Hose Adaptor Elbow 50mm x 2" BSP MaleThread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£6.90
Add:
C37110001
Hose Connector for 13mm (1/2") Hose Simple to fit Tough durable plastic fitting Standard quick release fitting Fits most other quick release fittings
£2.32
Add:
C37110002
Hose Connector for 19mm (3/4") Hose Simple to fit Tough durable plastic fitting Standard quick release fitting Fits most other quick release fittings
£2.71
Add:
C37120002
Hose Connector with 3/4" Male Thread This is a click fit hose connector which is compatible with all the major brands. The connector has a male thread which is 3/4" BSP. The diameter of the thread has no relationship with its...
£2.38
Add:
C37100001
Hose Joiner for 13mm (1/2") Hose Simple to fit Tough durable plastic fitting For joining standard 1/2 inch garden hose together Ideal for repairing burst pipes
£2.46
Add:
C37100002
Hose Joiner For 3/4" 19mm Hose pipe The standard hose joint is used to join hoses together on a permanent or semi permanent installation. The inner diameter of the fitting makes sure that a high flow of water is allowed through the...
£2.23
Add:
C227511
Hose Elbow 13mm or 1/2" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£0.49
Add:
HAD227515
Hose Elbow 16mm or 5/8" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£0.67
Add:
C227522
Hose Elbow 20mm or 3/4" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£1.10
Add:
C227533
Hose Elbow 25mm or 1" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£1.29
Add:
C227544
Hose Elbow 32mm or 11/4" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£1.92
Add:
C227555
Hose Elbow 39mm or 11/2" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£2.57
Add:
C227566
Hose Elbow 50mm or 2" Inside Diameter Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£7.54
Add:
C687000
Galvanised Hose Pipe Guide A simple spiked hose pipe guide that will speed up the moving of hose pipe. The roller will guide the hose arround corners and other obsticals making saving time and damage to plants Galvanised...
£40.03
details Sold Out
C228532
Hose Reducer From 25mm - 20mm Inside Diameter Hose (1" - 3/4") Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose...
£1.10
Add:
C228543
Hose Reducer From 32mm - 25mm Inside Diameter Hose (11/4" - 1") Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose...
£1.58
Add:
C228520
Hose Reducer From 20mm - 13mm Inside Diameter Hose (3/4" - 1/2") Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose...
£1.07
Add:
C226511
Hose Joiner For 13mm or 1/2" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£0.42
Add:
C226515
Hose Joiner For 16mm or 5/8" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£0.58
Add:
C226522
Hose Joiner For 20mm or 3/4" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£0.88
Add:
C226533
Hose Joiner For 25mm or 1" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£1.18
Add:
C226544
Hose Joiner For 32mm or 11/4" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£1.56
Add:
C226555
Hose Joiner For 39mm or 11/2" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£2.58
Add:
HAD228211
Hose Tee 13mm or 1/2" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£0.51
Add:
HAD228215
Hose Tee 16mm or 5/8" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£0.65
Add:
C228222
Hose Tee 20mm or 3/4" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£1.26
Add:
C228233
Hose Tee 25mm or 1" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£1.56
Add:
C228244
Hose Tee 32mm or 11/4" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£2.07
Add:
C228255
Hose Tee 39mm or 11/2" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£3.20
Add:
C228811
Hose Y 13mm or 1/2" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£3.13
Add:
C228815
Hose Y 16mm or 5/8" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£2.57
Add:
C228822
Hose Y 20mm or 3/4" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£3.69
Add:
C228833
Hose Y 25mm or 1" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£10.14
Add:
MEG0423303
Hose Repair Hose Coupling For 1" or 25 mm Hose Pipe Italian made brass hose repair coupling. Suitable for joining hose pipes together with a high flow clear bore centre these hose joiners do not impede the flow through the hose. The...
£7.61
details Sold Out
MEG0423331
Hose Repair Hose Coupling For 1/2" or 12 mm Hose Pipe Italian made brass hose repair coupling. Suitable for joining hose pipes together with a high flow clear bore centre these hose joiners do not impede the flow through the hose. ...
£2.89
Add:
MEG0423314/0411832
Hose Repair Hose Coupling For 11/4" or 32 mm Hose Pipe Italian made brass hose repair coupling. Suitable for joining hose pipes together with a high flow clear bore centre these hose joiners do not impede the flow through the hose. ...
£16.51
Add:
MEG0423302
Hose Repair Hose Coupling For 3/4" or 19 mm Hose Pipe Inside Diameter Italian made brass hose repair coupling. Suitable for joining hose pipes together with a high flow clear bore centre these hose joiners do not impede the flow through...
£5.16
Add:
HSGB3AM3F
Hunter ACME Thread 1" Male Converter to 1" BSP Female Thread The Hunter ACME thread converter is used on certain large pop ups to convert the thread from the standard ACME thread used in America to the British Standard Pipe Thread...
£8.80
Add:
HSGB5AM5F
Hunter ACME Thread 11/2" Female Converter to 11/2" BSP Male Thread The female thread is an ACME thread and the Male Thread is a BSP thread The Hunter ACME thread converter is used on certain large pop ups to convert the thread...
£13.47
Add:
HSGB5AM3F
Hunter ACME Thread 11/2" Male Converter to 1" BSP Female Thread The Hunter ACME thread converter is used on certain large pop ups to convert the thread from the standard ACME thread used in America to the British Standard Pipe Thread...
£13.47
Add:
HSGB5AM4F
Hunter ACME Thread 11/2" Male Converter to 11/4" BSP Female Thread The Hunter ACME thread converter is used on certain large pop ups to convert the thread from the standard ACME thread used in America to the British Standard Pipe...
£13.71
Add:
CHSGB4AM3F
Hunter ACME Thread 11/4" Male Converter to 1" BSP Female Thread The Hunter ACME thread converter is used on certain large pop ups to convert the thread from the standard ACME thread used in America to the British Standard Pipe Thread...
£9.65
Add:
HSGB4AM5F
Hunter ACME Thread 11/4" Male Converter to 11/2" BSP Female Thread The Hunter ACME thread converter is used on certain large pop ups to convert the thread from the standard ACME thread used in America to the British Standard Pipe...
£9.65
Add:
EHSPROS12
Hunter Pro-Spray 12" ( Body Only) The Pro-Spray is just the body there is no nozzles as this has to be purchased as a separate item. The 12 inch body is ideal for use in shrub borders or as lawn watering nozzle that is ideal for...
£18.43
Add:
CHCBTT201
Hunter 2 Zones Outdoor Bluetooth Enabled Water Timer Bluetooth enabled for quick and easy programming Managed unlimited bluetooth timers from a single device Independent timer and cycling modes 1 second - 24 hour run...
£128.70
Add:
CHVZS09VDC
Hunter Latching 9 Volt DC Coil Used when Hunter valves are being used with low voltage battery powered timers or controls. As an example the Hunter Node. The solenoid is threaded in to the same port as the standard ac...
£20.62
Add:
HCACC99D
The Two-Wire Decoder Version of Hunter’s Most Powerful Commercial Controller The versatility of the ACC controller grows even more powerful with the addition of the two-wire decoder system from Hunter. ACC-99D uses two-wire decoders to control...
£2,308.68
Add:
HUNHVACCU-ADJ
Hunter Adjustable Solenoid Valve Pressure Regulator The Accu-Sync Pressure regulator is used to standadise the water pressure to each zone making the spray more even or for reduced flow areas that may get damaged by large pumps. ...
£70.41
Add:
CHCBTT-101
Hunter Battery Powered Bluetooth Enabled Water Timer Keep even the smallest areas adequately watered with BTT, a Bluetooth® -enabled, battery-operated tap timer controlled via an iOS or Android smartphone. BTT is the perfect durable...
£87.89
Add:
HCN2X2Y250
Hunter Decoder Control Cable 2 Core 250 Metre Roll
£606.41
Add:
HCN2X2Y250
Hunter Decoder Control Cable 2 Core
£4.48
Add:
HSG75B
Hunter G70 Adjustable Arc Golf Rotor Easy to adjust and maintain, Hunter's G-70 golf and large turf rotor is also the ideal choice for the customer on a budget. The B Series rotors provide all the standard features you want for...
£147.76
Add:
HSG70B
Hunter G70 Full Circle Golf Rotor Easy to adjust and maintain, Hunter's G-70 golf and large turf rotor is also the ideal choice for the customer on a budget. The B Series rotors provide all the standard features you want for mid-distance...
£129.29
Add:
HSG880E
Hunter G880E Golf Head Full Circle Boasting the highest torque output of any golf rotor on the market, the G884 and G84B’s patented gear drive will push through anything that gets in its way. Try it yourself and see. With just one...
£328.48
Add:
HSG885E
Hunter G880E Golf Head Part Circle Electrical Valve Boasting the highest torque output of any golf rotor on the market, the G884 and G84B’s patented gear drive will push through anything that gets in its way. Try it yourself and see....
£364.96
Add:
HSG885DIH
Hunter G880E Golf Head Full Or Part Circle Decoder In Head Boasting the highest torque output of any golf rotor on the market, the G884 and G84B’s patented gear drive will push through anything that gets in its way. Try it yourself and...
£561.10
Add:
HSG990E
Hunter G990 Full Circle Golf Head Hunter G900 Series golf rotors feature the perfect combination of durability, efficiency and user flexibility. Available in a variety of TTS and DIH configurations, they offer a solution for any long-range...
£360.15
Add:
HSG995E
Hunter G990 Full Circle Golf Head Hunter G900 Series golf rotors feature the perfect combination of durability, efficiency and user flexibility. Available in a variety of TTS and DIH configurations, they offer a solution for any long-range...
£395.52
Add:
HSG80B
Hunter G80B Full Circle Golf Rotor Easy to adjust and maintain, Hunter's G80B golf and large turf rotor is also the ideal choice for the customer on a budget. The B Series rotors provide all the standard features you want for mid-distance...
£155.14
Add:
HSG85B
Hunter Golf Rotor Adjustable Arc Boasting the highest torque output of any golf rotor on the market, the G-85’s patented gear drive will push through anything that gets in its way. Try it yourself and see. With just one rotation of the...
£177.95
Add:
HCHC0100FLOW
Hunter HC Flow Meter 1" BSP Thread The simple-to-install HC flow meter, now with additional range options to accommodate larger pipe sizes, allows customers to better monitor flow rates in systems with Hydrawise-enabled Wi-Fi controllers....
£205.25
details Sold Out
HCHC075FLOW
Hunter HC Flow Meter 3/4" BSP Thread The simple-to-install HC flow meter, now with additional range options to accommodate larger pipe sizes, allows customers to better monitor flow rates in systems with Hydrawise-enabled Wi-Fi...
£179.52
details Sold Out
HCHCC800PL
Hunter HCC Commercial Irrigation Control Unit Outdoor In Plastic Box The next-generation HCC controller brings the powerful Wi-Fi-based irrigation management capabilities of the industry-leading Hydrawise™ platform to high-end...
£595.00
Add:
HCIC21CM2200
Hunter HCC Pro Expansion Moudule 22 Zone Used in conjunction with the Hunter HCC Pro these modules can be used to expand the zones available from 8 available in the standard 8 station base model up to a maximum of 38
£486.19
Add:
HCIC21CM400
Hunter HCC Pro Expansion Mudule 4 Zone Used in conjunction with the Hunter HCC Pro these modules can be used to expand the zones available from 8 available in the standard 8 station base model up to a maximum of 38
£134.19
Add:
HCIC21CM800
Hunter HCC Pro Expansion Mudule 8 Zone Used in conjunction with the Hunter HCC Pro these modules can be used to expand the zones available from 8 available in the standard 8 station base model up to a maximum of 38
£247.49
Add:
2SJH360212
Hunter Heavy Duty PVC Swing Arm By Lasco 11/5" BSP Male x 11/2" ACME Male Thread 12" Length With Standard Outlet An essential product to use when installing pop ups. The swinging arm has 2 universal joints at either end...
£51.08
Add:
2SJH165412
Hunter Heavy Duty PVC Swing Arm By Lasco 1" BSP Male x 1" BSP Male Thread 12" Length With Triple Top Outlet An essential product to use when installing pop ups. The swinging arm has 2 universal joints at either end making...
£66.45
Add:
2SJH168412
Hunter Heavy Duty PVC Swing Arm By Lasco 1" BSP Male x 1" ACME Male Thread 12" Length With Triple Top Outlet An essential product to use when installing pop ups. The swinging arm has 2 universal joints at either end making...
£46.53
Add:
2SJH360412
Hunter Heavy Duty PVC Swing Arm By Lasco 11/2" BSP Male x 11/2" ACME Male Thread 12" Length With Triple Top Outlet An essential product to use when installing pop ups. The swinging arm has 2 universal joints at either end...
£72.95
Add:
2SJH268412
Hunter Heavy Duty PVC Swing Arm By Lasco 11/4" BSP Male x 11/2" ACME Male Thread 12" Length With Triple Top Outlet An essential product to use when installing pop ups. The swinging arm has 2 universal joints at either end...
£61.13
Add:
HJ260412
Hunter Heavy Duty PVC Swing Arm By Lasco 11/4" BSP Male x 11/4" ACME Male Thread 12" Length With Triple Top Outlet An essential product to use when installing pop ups. The swinging arm has 2 universal joints at either end...
£64.82
Add:
HSI8004SS38
Hunter I-80 Turf Rotor Stainless Steel 4" Riser The I-80 gear-driven rotor is the most technologically advanced commercial rotor available. Engineered for sports turf and large park applications, the I-80 provides an ultra-robust,...
£169.92
Add:
HSI8004SS038
Hunter I-80 Turf Rotor Stainless Steel 4" Riser Opposing Nozzles The I-80 gear-driven rotor is the most technologically advanced commercial rotor available. Engineered for sports turf and large park applications, the I-80 provides an...
£183.77
Add:
HSI4006SSO
Hunnter 6" Stainless Steel Riser I-40 Pop Up Rotor Full Circle With Opposing Nozzles The I-40 Rotor is a standard for sports pitches when a turf cap is installed The I-40 is a tough commercial rotor that delivers water with accuracy and...
£115.32
Add:
CHSI4004SS
Hunter I-40 Full Or Part Circle 4" Stainless steel riser and check valve . The I-40 is a tough commercial rotor that delivers water with accuracy and efficiency at distances up to 23.2 m. Featuring diverse three-port nozzle...
£105.28
Add:
HSI4004SS0
Hunter I-40 Full Or Part Circle 4" With Opposing Nozzles . The I-40 is a tough commercial rotor that delivers water with accuracy and efficiency at distances up to 23.2 m. Featuring diverse three-port nozzle options, a...
£115.32
Add:
HSI4006SS
Hunter I-40 Full Or Part Circle 6" Stainless steel riser and check valve . The I-40 is a tough commercial rotor that delivers water with accuracy and efficiency at distances up to 23.2 m. Featuring diverse three-port nozzle...
£106.79
Add:
HSI5006SS
Hunter I-50 Commercial Rotor 6" Riser The I-50 large turf rotor is built to conquer the most demanding conditions. The powerful internal drive mechanism and versatile arc adjustment style are derived from Hunter’s time-proven golf...
£141.29
Add:
HSI5006SS
Hunter I-50 Commercial Rotor 6" Riser Opposing Nozzles The I-50 large turf rotor is built to conquer the most demanding conditions. The powerful internal drive mechanism and versatile arc adjustment style are derived from Hunter’s...
£149.14
Add:
HSI80TC
Hunter Turf Cup Kit For I-80 Pop Ups Fits to the I-80 pop up allowing the pop up to be disguised when not operating
£163.45
Add:
HSI90ADV
Hunter I-90 Large Turf Rotor With Adjustable Arc The I-90 is Hunter’s longest distance rotary sprinkler specifically designed for natural turf, parks, sports fields, and public areas. With a radius up to 30.8 m from a single sprinkler,...
£196.02
Add:
HSI9036V
Hunter I-90 Large Turf Rotor 360 Degree Full Circle ONly Opposing Nozzles The I-90 is Hunter’s longest distance rotary sprinkler specifically designed for natural turf, parks, sports fields, and public areas. With a radius up to 30.8 m...
£190.68
Add:
CHSI2012
Hunter i20 Pop Up Rotor Standard Riser A High Performance Rotor with the Diversity and Efficiency for Any Site With 22 nozzle choices, a 4.9 to 14.0 m radius, the I-20 is an indispensable rotor. Whether you’ve got a small...
£53.56
Add:
CHSI2004
Hunter i20 Pop Up Rotor Standard Riser A High Performance Rotor with the Diversity and Efficiency for Any Site With 22 nozzle choices, a 4.9 to 14.0 m radius, the I-20 is an indispensable rotor. Whether you’ve got a small...
£25.76
Add:
CHSI2004SS
Hunter i20 Pop Up Rotor Stainless Steel Riser A High Performance Rotor with the Diversity and Efficiency for Any Site With 22 nozzle choices, a 4.9 to 14.0 m radius, the I-20 is an indispensable rotor. Whether you’ve got a...
£37.25
details Sold Out
CHSI2006SS
Hunter I20 Pop Up Sprinkler 6" S/S Riser Check Valve A very high performance gear driven pop up which is ideal for most domestic gardens including very large ones. A very accurate watering action that will make sure that all parts...
£49.46
Add:
HSI2504SS
Hunter I25 Pop Up Sprinkler 4" Stainless Steel Riser A very high performance gear driven pop up which is ideal for most domestic gardens including l very large ones. A very accurate watering action that will make sure that all parts...
£82.92
Add:
CHSI2504
Hunter I25 Pop Up Sprinkler 4" Standard Plastic Riser A very high performance gear driven pop up which is ideal for most domestic gardens including l very large ones. A very accurate watering action that will make sure that all...
£63.36
Add:
CHSI2506
Hunter I25 Pop Up Sprinkler 6" A very high performance gear driven pop up which is ideal for most domestic gardens including l very large ones. A very accurate watering action that will make sure that all parts of the lawn receive similar...
£70.49
Add:
cHSI2506SS
Hunter I25 Pop Up Sprinkler 6" Stainless Steel Riser A very high performance gear driven pop up which is ideal for most domestic gardens including l very large ones. A very accurate watering action that will make sure that all parts...
£90.66
Add:
HCEZDM
Hunter HCC/ ICC2 Decoder Module Cost and complexity have often limited decoder technology to higher-end systems. However, with the revolutionary EZ Decoder System (EZDS), you get all the advantages of two-wire installations with simpler,...
£353.97
details Sold Out
HCEZI
Hunter ICC2/HCC 1 Station Decoder Cost and complexity have often limited decoder technology to higher-end systems. However, with the revolutionary EZ Decoder System (EZDS), you get all the advantages of two-wire installations with simpler,...
£100.58
Add:
HPAM12Z
Hunter 12 Zone pre assembled manifold This kit will make installation of your irrigation control quick and simple. The unit comes pre assembled and will match up with any 24 volt ac control unit. The unit is pre wired so all...
£354.00
Add:
HPAM2Z
Hunter 2 Zone pre assembled manifold This kit will make installation of your irrigation control quick and simple. The unit comes pre assembled and will match up with any 24 volt ac control unit. The unit is pre wired so all you...
£67.52
Add:
HPAM3Z
Hunter 3 Zone pre assembled manifold This kit will make installation of your irrigation control quick and simple. The unit comes pre assembled and will match up with any 24 volt ac control unit. The unit is pre wired so all you...
£96.96
Add:
HPAM4Z
Hunter 4 Zone pre assembled manifold This kit will make installation of your irrigation control quick and simple. The unit comes pre assembled and will match up with any 24 volt ac control unit. The unit is pre wired so all you...
£137.91
Add:
HPAM6Z
Hunter 6 Zone pre assembled manifold This kit will make installation of your irrigation control quick and simple. The unit comes pre assembled and will match up with any 24 volt ac control unit. The unit is pre wired so all you...
£182.23
details Sold Out
HPAM8Z
Hunter 8 Zone pre assembled manifold This kit will make installation of your irrigation control quick and simple. The unit comes pre assembled and will match up with any 24 volt ac control unit. The unit is pre wired so all you...
£251.18
Add:
EHCSCLIKM
Hunter Mini Click Rain Sensor The Simplest Way to Automatically Stop Irrigation During Rainfall Irrigating a landscape during a rainstorm not only results in oversaturated plants and turf, it also wastes water. Hunter's Mini Clik rain...
£47.15
Add:
HCMWSS
MWS helps Any System Battle Wind, Rain, and Freezing Temperatures Ensuring efficient irrigation means being prepared for changing weather. The Hunter Mini-Weather Station helps system operators be as prepared as possible by combining each of...
£107.74
Add:
EHSMPGAUGE
Hunter MP Rotator Pressure Gauge Typically you would use this gauge if you are using non pressure regulated bodies or shrub sprayers. The pressure gauge is attached to one of the sprayers and will measure the actual running pressure at...
£58.20
details Sold Out
CHCNODE1V
Hunter Node 100 Comes with Hunter PGV 1" Flow Adjustable Valve Quick Specs Application: Residential/Commercial Number of Stations: 1 Type: Battery 9 Volt Dc Comes with the Huynter PGV Valve ...
£145.20 £80.39
details Sold Out
HCNODE2BTT
Hunter Node Bluetooth 2 Station Without Coils Quick Specs Application: Residential/Commercial Number of Stations: Up to 2 Type: Battery 9 Volt Dc Does not come with the dc latching valve or coils ...
£187.94
details Sold Out
CHCNODE1V
Hunter Node Bluetooth 100 Comes with Hunter PGV 1" Flow Adjustable Valve Avoid the valve box with the battery-operated NODE-BT controller! NODE-BT is enabled with powerful wireless Bluetooth® technology that can be easily managed...
£154.76
Add:
HCNODE1BT
Hunter Node 100 1 Zone BT Quick Specs Application: Residential/Commercial Number of Stations: Up to 1 Type: Battery 9 Volt Dc comes with the dc latching valve solenoid but not the valve Bluetooth enabled for...
£122.28
details Sold Out
HCNODE4BT
Hunter Node 100 4 Zone BT Quick Specs Application: Residential/Commercial Number of Stations: Up to 4 Type: Battery 9 Volt Dc Does not come with the dc latching valve Bluetooth enabled for programing from a smart device ...
£219.99
Add:
CHSZ123200
Hunter Nozzle Insertion Collar Make it easier to install nozzles in the Hunter Pop up sprinklers Click here for more information on Hunter Pop Ups
£1.23
Add:
CHSPSN10A
Hunter Precision Adjustable Spray Nozzle 10A 3 Metre Radius The ideal nozzle for use with a pro spray pop up body in beds and borders or on a shrub adapter as a fixed permanent sprayer. Crisp well defined edges matched...
£1.42
Add:
CHSPSN12A
Hunter Precision Adjustable Spray Nozzle 12A 3.7 Metre Radius The ideal nozzle for use with a pro spray pop up body in beds and borders or on a shrub adapter as a fixed permanent sprayer. Crisp well defined edges matched...
£1.42
Add:
CHSPSN15A
Hunter Precision Adjustable Spray Nozzle 15A 4.6 Metre Radius The ideal nozzle for use with a pro spray pop up body in beds and borders or on a shrub adapter as a fixed permanent sprayer. Crisp well defined edges matched...
£1.42
Add:
CHSPSN17A
Hunter Precision Adjustable Spray Nozzle 17A 5.2 Metre Radius The ideal nozzle for use with a pro spray pop up body in beds and borders or on a shrub adapter as a fixed permanent sprayer. Crisp well defined edges matched...
£1.42
Add:
CHSPSN08A
Hunter Precision Adjustable Spray Nozzle 8A 2.4 Metre Radius The ideal nozzle for use with a pro spray pop up body in beds and borders or on a shrub adapter as a fixed permanent sprayer. Crisp well defined edges matched...
£1.42
Add:
CHSPGJ04
Hunter PGJ Gear Driven Pop Up The Hunter PGJ is one of the most popular pop up rotors produced by Hunter. The Pop ups is compact in size, extremely reliable and comes with a selection of nozzles that will cater for most watering situations...
£13.40
Add:
CHSPGJ06
Hunter PGJ Gear Driven Pop Up The Hunter PGJ is one of the most popular pop up rotors produced by Hunter. The Pop ups is compact in size, extremely reliable and comes with a selection of nozzles that will cater for most watering situations...
£32.99
Add:
CHSPGJ-00
Hunter PGJ Shrub Head ( does not pop up ) The PGJ was built to bring all the efficient benefits of rotary sprinklers to applications that typically call for a spray. Its many features include a rack of easy-to-install-and-change,...
£14.42
Add:
CHSPGP04CV
Hunter PGP Ultra Full Circle Pop Up With Check Valve This is the same as the standard PGP pop up apart from the check valve fitted to the unit. The check valve prevents the water in the supply pipe running out of the system via the lowest pop...
£23.32
Add:
CHSPGP04
Hunter PGP Ultra Pop Up Sprinkler The PGP pop up sprinkler has been the best selling pop up sprinkler since 1981. There are 2 models available, Standard and Ultra. We do only stock the ultra. Arc setting from 50 and up to 360 degrees 5...
£15.38
Add:
Z9053D
Hunter PGP Ultra Full Circle Pop Up With Check Valve 12 inch Adjustable arc from 50 - 360 degrees 5 year warranty water lubricated gears Range adjustment from 4.9 m - 14 m Operating pressure from 1.7 - 4.5 bar Water flow 0.07 - 3.42 cubic metres...
£38.47
Add:
CHSPGP-00-cv
Hunter PGP Ultra Shrub Head The PGP Ultra takes the foundation of the best-selling PGP Rotor and raises the bar with a variety of new features developed over three decades of research, customer feedback, and lab testing. Among the most notable...
£15.38
Add:
CHVPGV-151
Hunter PGV Solenoid Valve 11/2" BSP Female Thread This hard working, heavy-duty valve offers the best features of Hunter’s top-of-the-line valves. Built with enough durability to handle the rigors of most residential and light...
£71.92
Add:
CHVPGV-201
Hunter PGV Solenoid Vale 2" BSP Female Thread This hard working, heavy-duty valve offers the best features of Hunter’s top-of-the-line valves. Built with enough durability to handle the rigors of most residential and light commercial...
£84.69
Add:
CHVPGV-101
Hunter PGV 24v ac Solenoid Valve 1 inch Female thread Not to be confused with the Hunter PGV no flow control valve. This model DOES HAVE FLOW CONTROL High grade construction for pressures up to 150 Psi Flow control with non rising...
£22.19
Add:
CHVPGV-101MMB
Hunter PGV 24v ac Solenoid Valve 1 inch Male Thread Not to be confused with the Hunter PGV no flow control valve. This model DOES HAVE FLOW CONTROL High grade construction for pressures up to 150 Psi Flow control with non rising handle...
£22.19
Add:
CHVPGV101JT
Hunter PGV 24vac Jar Top Solenoid Valve 1 inch Female thread For the maximum in convenience, reliability, and ease of service in a residential valve, the PGV Jar-Top is the solution. With the PGV Jar-Top, it’s possible to service a Hunter...
£22.19
Add:
EHVPGV101JTM
Hunter PGV 24vac Jar Top Solenoid Valve 1 inch Male thread For the maximum in convenience, reliability, and ease of service in a residential valve, the PGV Jar-Top is the solution. With the PGV Jar-Top, it’s possible to service a Hunter valve...
£25.10
Add:
PGV101GBDC
Hunter PGV 9Volt DC Solenoid Valve 1 inch Female thread Not to be confused with the Hunter PGV no flow control valve. This model DOES HAVE FLOW CONTROL High grade construction for pressures up to 150 Psi Flow control with non...
£38.30
Add:
HPGVBS
Hunter PGV Bleed Screw Pack Of 4 Fits all Hunter valves and is the bleed screw
£11.53
details Sold Out
CHSZ172000
Hunter Pop Up Sprinkler Nozzle Key Used to adjust the nozzles of all Hunter pop up sprinklers Multi tool to adjust throw, change nozzles, change radius and degrees of coverage
£1.80
Add:
HCPCDM
Hunter Pro C Decoder Module Cost and complexity have often limited decoder technology to higher-end systems. However, with the revolutionary EZ Decoder System (EZDS), you get all the advantages of two-wire installations with simpler, more...
£283.38
Add:
EHSPROS06
Hunter 6" High Pro-spray body The 6 Inch or 15 cm high Pro-Spray model is an ideal sprinkler body for the MP Rotator. The nozzle is tough and durable and has all the key features that are needed to house the Mp Rotator. Suitable for...
£10.06
Add:
HCPCM3
Hunter Pro-C 3 Station Expansion Module This simple plug in unit will extend your Pro-C outdoor control unit by 3 zones. The module clips in to place so is very simple to instal. The Pro-C can be expanded up to 16 zones in total....
£71.49
Add:
HCPCM9
Hunter Pro-C 9 Station Expansion Module PCM-900 The 9 zone module is a simple plug in unit which will expand your Pro-C by 9 zones. The Pro-c can be expanded up to 16 zones. The Pro-c comes with 4 active zones and in order to expand up...
£262.90
Add:
HCHPC0401E
Hunter Pro C Hydrawise 4 Station Outdoor Controller 4 - 23 zones The HPC combines the power of Wi-Fi-based irrigation management and the convenience of modular functionality into one next-generation controller. HPC helps contractors save time,...
£329.99
Add:
C2SJBFLEX-30
Hunter Pro-Flex Swinging Arm Tubing 30 Metre Roll The Hunter swinging arm tubing is used if you would rather make your own swining arms or if you need extended swinging arms for awkward locations Hunter FlexSG Tubing is a soft,...
£41.99
Add:
2SJBFLEX-PERM
Hunter Pro-Flex Swinging Arm Tubing Per Metre The Hunter swinging arm tubing is used if you would rather make your own swining arms or if you need extended swinging arms for awkward locations Hunter FlexSG Tubing is a soft, flexible...
£1.69
Add:
EHCPRO12
Hunter PRO-HC Outdoor Control Unit 12 Stations WEB Based Manage this durable outdoor irrigation controller with Hydrawise web-based software from anywhere worldwide using your smart device or web browser. Predictive watering adjusts schedules...
£495.07
Add:
EHCPRO24
Hunter PRO-HC Outdoor Control Unit 24 Stations WEB Based Manage this durable outdoor irrigation controller with Hydrawise web-based software from anywhere worldwide using your smart device or web browser. Predictive watering adjusts schedules...
£866.88
Add:
EHCPRO06
Hunter PRO-HC Outdoor Control Unit 6 Stations WEB Based Manage this durable outdoor irrigation controller with Hydrawise web-based software from anywhere worldwide using your smart device or web browser. Predictive watering adjusts schedules...
£418.03
Add:
EHSPROS-02
Hunter 2" High Pro-spray body The Hunter Pro-Spray body is unlike a gear driven pop up because the water is distributed as a constant fan around the whole watering area while gear driven pop ups spray a jet of water and the water powered...
£2.99
Add:
EHSPROS04
Hunter 4" High Pro-spray body The Hunter Pro-Spray body is unlike a gear driven pop up because the water is distributed as a constant fan around the whole watering area while gear driven pop ups spray a jet of water and the water powered...
£2.80
Add:
EPRS3004
HUNTER Pro Spray Pressure Regulated Body 4" Riser The pressure regulated riser makes sure that each nozzle works at its optimum pressure. This body is very good when used in large zones with many pop ups operating at the same time ...
£8.90
Add:
EPHSPRS40-04-CV
HUNTER Pro Spray 2.8 Pressure Regulated Body 4" Riser With Check Valve Hunter’s revolutionary MP Rotators use multi-stream technology to deliver accurate streams of water with superior uniformity. When used in place of...
£11.66
Add:
EHSPROS-04-CV
Hunter 4" High Pro-spray body With Check Valve The Hunter Pro-Spray body is unlike a gear driven pop up because the water is distributed as a constant fan around the whole watering area while gear driven pop ups spray a jet of water and...
£6.44
Add:
EHPSR52
When a system requires the use of a booster pump or pulls water directly from a creek or pond, it’s imperative to include a relay that can be counted upon to activate the pump each and every time. Hunter’s Pump Start Relays have been...
£183.24
Add:
HCROAMKIT
Hunter Roam Remote he ability to remotely command a controller means operators never have to walk back and forth to stop and start irrigation. Winterization is quick and easy and can be accomplished with only one worker. The mid-range...
£255.46
Add:
CHSRZW10
Hunter 10" Root Zone Tree Watering Kit In order for young plants and trees to thrive, it's critical they recieve adequate irrigation to all levels of the root zone and the steady exchange of air. Developed to meet this challenge, the...
£20.14
Add:
HSRZW18
Hunter 18" Root Zone Tree Watering Kit In order for young plants and trees to thrive, it's critical they recieve adequate irrigation to all levels of the root zone and the steady exchange of air. Developed to meet this challenge, the...
£43.56
Add:
EHSPRS40-OO
Hunter Shrub Adapter With 2.5 Bar Pressure Regulator The Hunter Shrub adapter will convert any 1/2" Male BSP thread so that in can be used with an MP rotator nozzle. This particular unit makes sure that the pressure at the spray head is...
£7.14
Add:
CHUNHCSOILCLIK
Hunter Soil Clik Moisture Sensor The Hunter Soil Clik moisture sensor offer a ground breaking extra to any 24 volt ac watering control. It is compatible with most of the Hunter range of control units and can be combined with the Solar Sync to...
£185.90
Add:
CHJBE1M
Hunter Spiral Barbed Elbows 1/2" BSP Male Thread Hunter Spiral Barb Elbows are particularly unique because instead of using a series of graduated barbs, Hunter’s elbows have a single spiral path that aids in installation and...
£0.37
Add:
C2SJBE2M
Hunter Spiral Barbed Elbows 3/4" BSP Male Thread Hunter Spiral Barb Elbows are particularly unique because instead of using a series of graduated barbs, Hunter’s elbows have a single spiral path that aids in installation and...
£0.40
Add:
2SJBETOOL
Hunter Spiral Elbow Insertion Tool Used to help install the spiral elbow in to the flex pipe
£19.24
Add:
hj1b5212
Hunter Heavy Duty PVC Swing Arm By Lasco 1" BSP Male x 1" BSP Male Thread 12" Length An essential product to use when installing pop ups. The swinging arm has 2 universal joints at either end making the installation,...
£33.53
details Sold Out
C2SJH2212
Hunter Swinging Arm 12" x 3/4" x 3/4" BSP The Hunter Swinging arm Joint is the easy way to install sprinklers at their proper height and position in mere seconds. Hunter swinging arms offer a simple way to install a pop...
£3.17
Add:
CSJH1206
Hunter Swinging Arm 6" x 3/4" x 1/2" BSP The Hunter Swinging arm Joint is the easy way to install sprinklers at their proper height and position in mere seconds. Hunter swinging arms offer a simple way to install a pop up...
£2.83
Add:
CSJH2206
Hunter Swinging Arm 6" x 3/4" x 3/4" BSP The Hunter Swinging arm Joint is the easy way to install sprinklers at their proper height and position in mere seconds. Hunter swinging arms offer a simple way to install a pop up...
£2.74
Add:
E2SJH1112
Hunter Swinging Arm For Pop-Ups 12" x 1/2" x 1/2" BSP The Hunter Swinging arm Joint is the easy way to install sprinklers at their proper height and position in mere seconds. Hunter swinging arms offer a simple way to...
£3.30
Add:
E2SJH1212
Hunter Swinging Arm For Pop-ups 12" x 1/2" x 3/4" BSP The Hunter Swinging arm Joint is the easy way to install sprinklers at their proper height and position in mere seconds. Hunter swinging arms offer a simple way to...
£3.46
Add:
EHJ0506
Hunter Swinging Arm For Pop-Ups 6" x 1/2" x 1/2" BSP The Hunter Swinging arm Joint is the easy way to install sprinklers at their proper height and position in mere seconds. Hunter swinging arms offer a simple way to...
£2.76
Add:
HSGT885DIH
Hunter T885E Golf Rotor Adjustable Arc With Decoder In Head TTS-800 Series rotors provide maximum uniformity and longevity in the field. The high-torque gear drives are the strongest in the industry, so the challenges of reclaimed water use or...
£586.91
Add:
HSGT885E
Hunter T885E Golf Rotor With Adjustable ARC TTS-800 Series rotors provide maximum uniformity and longevity in the field. The high-torque gear drives are the strongest in the industry, so the challenges of reclaimed water use or poor water...
£393.91
Add:
HSGT880E
Hunter T885E Golf Rotor Full Circle TTS-800 Series rotors provide maximum uniformity and longevity in the field. The high-torque gear drives are the strongest in the industry, so the challenges of reclaimed water use or poor water quality are...
£369.34
Add:
HSGT884E
Hunter T885E Golf Rotor Full Circle Or Adjustable ARC TTS-800 Series rotors provide maximum uniformity and longevity in the field. The high-torque gear drives are the strongest in the industry, so the challenges of reclaimed water use or poor...
£393.91
Add:
G85Hunter
£442.20
Add:
EHCX2WAND
Hunter WAND Fits Hunter X2 For WIFI Connectivity And Hydrawise Controls The WAND fits in to the X2 control unit giving it WIFI capability which includes Amazon Alexa and Control4 Automation. The WAND will give you access to the...
£167.34
Add:
EHCX214
Hunter X2 14 Zone Control Unit The X2 replaces the X-core and is available in 4, 6, 8 and 14 station modules. WiFi Capable allowing connection to the Hydrawise software for easy watering schedule management by adding the WAND...
£308.81
Add:
EHCX204
Hunter X2 4 Zone Control Unit The X2 replaces the X-core and is available in 4, 6, 8 and 14 station modules. WiFi Capable allowing connection to the Hydrawise software for easy watering schedule management by adding the WAND Module ...
£148.80
Add:
EHCX206
Hunter X2 6 Zone Control Unit The X2 replaces the X-core and is available in 4, 6, 8 and 14 station modules. WiFi Capable allowing connection to the Hydrawise software for easy watering schedule management by adding the WAND Module ...
£170.26
Add:
EHCX208
Hunter X2 8 Zone Control Unit The X2 replaces the X-core and is available in 4, 6, 8 and 14 station modules. WiFi Capable allowing connection to the Hydrawise software for easy watering schedule management by adding the WAND Module ...
£204.00
Add:
CHVZS24vac
Hunter Solenoid 24 VAC
£16.50
Add:
C38T00-50
Hydrant Valve Box Used in lawns, borders and other areas that have a supply pipe that needs a take off for a hose pipe. The unit has a 3/4" female BSP inlet thread that can be connected to supply pipes. The outlet as standard...
£35.30
Add:
LFH0504794
Layflat Hose 102 mm Inside Diameter 5 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6...
£343.54
details Sold Out
LFH0504715
Layflat Hose 102 mm Inside Diameter 5 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6...
£171.77
details Sold Out
LFH0504796
Layflat Hose 152mm Inside Diameter 4 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£416.22
Add:
LFH0504710
Layflat Hose 102 mm Inside Diameter 3 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6...
£174.08
details Sold Out
LFH0504715
Layflat Hose 25 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£21.78
details Sold Out
LFH0504716
Layflat Hose 25 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£39.64
details Sold Out
LFH0504720
Layflat Hose 32 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£84.56
Add:
LFH0504718
Layflat Hose 32 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£21.14
details Sold Out
LFH0504719
Layflat Hose 32 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£42.28
details Sold Out
LFH0504790
Layflat Hose 38 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£107.03
details Sold Out
LFH0504721
Layflat Hose 38 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£26.75
details Sold Out
LFH0504722
Layflat Hose 38 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£53.51
details Sold Out
LFH0504791
Layflat Hose 51 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£137.42
details Sold Out
LFH0504723
Layflat Hose 51 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£34.35
details Sold Out
LFH0504724
Layflat Hose 51 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£68.71
details Sold Out
LFH0504792
Layflat Hose 63 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£192.91
details Sold Out
LFH0504725
Layflat Hose 63mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£48.22
details Sold Out
LFH0504726
Layflat Hose 63 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£96.52
Add:
LFH0504793
Layflat Hose 76 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£223.30
Add:
LFH0504727
Layflat Hose 76 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£55.81
details Sold Out
LFH0504728
Layflat Hose 76 mm Inside Diameter 6 Bar Rated Hydro-S Flat hose is used in water delivery hose and specialized for dewatering. The Hydro-S flat hose is made with blue PVC outer with a polyester inlay and works at a maximum pressure of 6 bar....
£111.64
details Sold Out
HSZ462458
£19.36
Add:
S602IBCF
IBC Thread Converter s60 - 2" BSPF Female thread Used to convert the thread on an IBC to a Britsh Standard Pipe Thread so that water fittings can be attached to the outlet
£19.91
Add:
VDL825133
Imperial PVC 45 Elbow 1" x 1" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£1.82
Add:
VDL825155
Imperial PVC 45 Elbow 11/2" x 11/2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£2.88
Add:
VDL825144
Imperial PVC 45 Elbow 11/4" x 11/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£2.50
Add:
VDL825166
Imperial PVC 45 Elbow 2" x 2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£5.04
Add:
VDL825122
Imperial PVC 45 Elbow 3/4" x 3/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£1.64
Add:
VDL824233
Imperial PVC Elbow 1" x 1" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. Below...
£1.15
Add:
VDL824255
Imperial PVC Elbow 11/2" x 11/2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£2.33
details Sold Out
VDL824244
Imperial PVC Elbow 11/4" x 11/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£1.62
Add:
VDL824266
Imperial PVC Elbow 2" x 2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. Below...
£5.06
Add:
VDL824222
Imperial PVC Elbow 3/4" x 3/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£1.03
Add:
VDL826733
Imperial PVC Pipe Cap 1" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. Below you will...
£1.18
details Sold Out
VDL826755
Imperial PVC Pipe Cap 11/2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. Below you will...
£1.84
Add:
VDL826744
Imperial PVC Pipe Cap 11/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. Below you will...
£1.49
Add:
VDL826766
Imperial PVC Pipe Cap 2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. Below you will...
£3.09
Add:
VDL826722
Imperial PVC Pipe Cap 3/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. Below you will...
£0.98
Add:
VDL821432
Imperial PVC Reducer 1" x 3/4" Reducers are used with the larger size of fittings. As an example a 1" - 3/4" Reducing Bush would need a 1" Socket. The 1" Socket would fit over the pipe then the...
£0.81
Add:
VDL821453
Imperial PVC Reducer 11/2" x 1" Reducers are used with the larger size of fittings. As an example a 1" - 3/4" Reducing Bush would need a 1" Socket. The 1" Socket would fit over the pipe then the...
£1.53
Add:
VDL821454
Imperial PVC Reducer 11/2" x 11/4" Reducers are used with the larger size of fittings. As an example a 1" - 3/4" Reducing Bush would need a 1" Socket. The 1" Socket would fit over the pipe then the...
£1.53
Add:
VDL821452
Imperial PVC Reducer 11/2" x 3/4" Reducers are used with the larger size of fittings. As an example a 1" - 3/4" Reducing Bush would need a 1" Socket. The 1" Socket would fit over the pipe then the...
£1.53
Add:
VDL821443
Imperial PVC Reducer 11/4" x 1" Reducers are used with the larger size of fittings. As an example a 1" - 3/4" Reducing Bush would need a 1" Socket. The 1" Socket would fit over the pipe then the...
£1.15
Add:
VDL821442
Imperial PVC Reducer 11/4" x 3/4" Reducers are used with the larger size of fittings. As an example a 1" - 3/4" Reducing Bush would need a 1" Socket. The 1" Socket would fit over the pipe then the...
£1.15
Add:
VDL821463
Imperial PVC Reducer 2" x 1" Reducers are used with the larger size of fittings. As an example a 1" - 3/4" Reducing Bush would need a 1" Socket. The 1" Socket would fit over the pipe then the reducing...
£2.08
Add:
VDL821465
Imperial PVC Reducer 2" x 11/2" Reducers are used with the larger size of fittings. As an example a 1" - 3/4" Reducing Bush would need a 1" Socket. The 1" Socket would fit over the pipe then the...
£2.08
Add:
VDL821464
Imperial PVC Reducer 2" x 11/4" Reducers are used with the larger size of fittings. As an example a 1" - 3/4" Reducing Bush would need a 1" Socket. The 1" Socket would fit over the pipe then the...
£2.19
Add:
VDL821421
Imperial PVC Reducer 3/4" x 1/2" Reducers are used with the larger size of fittings. As an example a 1" - 3/4" Reducing Bush would need a 1" Socket. The 1" Socket would fit over the pipe then the...
£0.81
Add:
VDL820533
Imperial PVC Socket 1" x 1" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£0.72
Add:
VDL822033
Imperial PVC Socket 1" x 1" BSP Female Thread Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£4.57
Add:
VDL822055
Imperial PVC Socket 11/2" x 11/2" BSP Female Thread Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£6.22
Add:
VDL820555
Imperial PVC Socket 11/2" x 11/2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£1.39
Add:
VDL820544
Imperial PVC Socket 11/4" x 11/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£1.06
details Sold Out
VDL822044
Imperial PVC Socket 11/4" x 11/4" BSP Female Thread Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early...
£5.30
details Sold Out
VDL820566
Imperial PVC Socket 2" x 2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£2.43
Add:
VDL822066
Imperial PVC Socket 2" x 2" BSP Female Thread Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£8.76
details Sold Out
VDL820522
Imperial PVC Socket 3/4" x 3/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£0.61
Add:
VDL822022
Imperial PVC Socket 3/4" x 3/4" BSP Female Thread Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£3.26
details Sold Out
VDL823133
Imperial PVC Tee 1" x1" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. Below...
£1.26
details Sold Out
VDL823155
Imperial PVC Tee 11/2" x 11/2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£2.62
Add:
VDL823144
Imperial PVC Tee 11/4" x 11/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£1.84
Add:
VDL823166
Imperial PVC Tee 2" x 2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. Below...
£5.51
Add:
VDL823122
Imperial PVC Tee 3/4" x 3/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£1.16
Add:
VDL827633
Imperial PVC Union 1" x 1" BSP Female Thread Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£6.33
Add:
VDL827455
Imperial PVC Union 11/2" x 11/2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£6.63
details Sold Out
VDL827444
Imperial PVC Union 11/4" x 11/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£6.39
Add:
VDL827666
Imperial PVC Union 2" x 2" BSP Female Thread Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£12.39
details Sold Out
VDL827422
Imperial PVC Union 3/4" x 3/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£4.57
Add:
VDL827422
Imperial PVC Union 3/4" x 3/4" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th...
£4.57
Add:
VDL827622
Imperial PVC Union 3/4" x 3/4" BSP Female Thread Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early...
£5.24
Add:
VDL827433
Imperial PVC Union 1" x 1" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£5.56
Add:
VDL827455
Imperial PVC Union 11/2" x 11/2" BSP Female Thread Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early...
£6.63
details Sold Out
VDL827644
Imperial PVC Union 11/4" x 11/4" BSP Female Thread Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early...
£7.32
Add:
VDL827466
Imperial PVC Union 2" x 2" Imperial PVC pipe fittings are very confusing as the diameter refers to the inside diameter of the PVC pipe. This standard relates back to the age of steam in the early 19th century. ...
£10.77
details Sold Out
IHC520820
Heavy Duty Industrial Metal Hose Cart Capacity 80 Metres 3/4" Hose Pipe This is an industrial hose cart and is suitable for high use environments. The trolley is made from coated steel complete with pneumatic tyres and Geka quick...
£461.89
details Sold Out
C412010
Irretec 2" BSP Water Filter Applications Secondary filtration in systems for irrigation, safe filtration. It can be installed in wells, outdoors or on fertigation machines. Materials • Body: polypropylene • Cover: polypropylene...
£52.67
Add:
C380010
Underground Valve Box 10 inch Round Valve box for underground installation Size Diameter Top 23cm Base 30cm Height 25cm
£9.99
Add:
CPM12
Italtecnica Pressure Switch PM12 Italtecnica PM12 Pressure Switch – Pressure switches for water pumps commonly used in agricultural, irrigation and borehole applications. PERFORMANCE RANGE Operating Range 3-12 Bar
£27.19
Add:
CJUB231016N
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£2.25
Add:
CJUB231020N
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£2.26
Add:
CJUB231025N
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£2.82
Add:
CJUB231030N
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£3.03
Add:
CJUB231035N
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£3.12
details Sold Out
CJUB231040N
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£3.20
Add:
CJUB231050
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£3.57
Add:
CJUB231060
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£3.92
Add:
CJUB231070
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£4.18
Add:
CJUB231080
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£4.46
Add:
CJUB231090
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£4.64
Add:
CJUB2310100
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£4.83
Add:
CJUB231012N
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£2.24
Add:
CJUB2310120
Genuine Jubilee Stainless Steel Jubilee Clips Genuine Stainless Steel Jubilee clips are made in the UK Genuine stainless steel jubilee clips are suitable for use in the marine or food industry. Size Old Size Diameter In mm 12 OOO 9.2-12...
£5.36
Add:
C3810020
Jumbo Economy Valve Box 21" x 15" x 12" The Jumbo valve box has a height of 12" Width 15" and a length of 21" Made from heavy duty plastic the box will support most garden traffic. The removable bolt down...
£43.99
Add:
264227
The Kärcher Rain System hose is the main component of the Kärcher Rain System garden irrigation range. Pressure resistant up to 4 bar, the braided hose has a three layer construction that makes it weather resistant,...
£7.69
Add:
2.645-227.0
The Kärcher Rain System hose is the main component of the Kärcher Rain System garden irrigation range. Pressure resistant up to 4 bar, the braided hose has a three layer construction that makes it weather resistant,...
£9.89
Add:
KARPP
Karcher Ground Pegs Ideal for securing 16mm outside diameter water pipes and hose pies
£0.24
details Sold Out
KARCFIL
Karcher Particle Filter The particle filter protects the spray and drip watering from dirt particles. The filter is attached to the end of a hose pipe The filter inlay can easily be removed and cleaned at any time. There is a tap...
£5.49
Add:
KAR13SE
Karcher Stopend For LDPE Pipe With a 13mm Inside Diameter This is a very simple to use connector that eliminates all the work associated with a traditional barbed fitting plus has a locking nut which will make sure that the fitting is securely...
£0.98
Add:
KAR16SE
Karcher Stopend For LDPE Pipe With a 16mm Outside Diameter This is a very simple to use connector that eliminates all the work associated with a traditional barbed fitting plus has a locking nut which will make sure that the fitting is...
£0.53
Add:
KARSTR13
Karcher Straight Connector For 13mm Inside Diameter LDPE The Karcher 13mm inside diameter connexion system offers a very simple to use secure connexion system for repairing or joining low density pipe together. Simple to use and...
£1.20
Add:
KARSTR16
Karcher Straight Connector For 16mm Outside Diameter LDPE The Karcher 13mm inside diameter connexion system offers a very simple to use secure connexion system for repairing or joining low density pipe together. Simple to use and...
£0.66
Add:
KARTEE13
Karcher 13mm Inside Diameter LDPE Pipe Tee With Flow Control Branch This is a very easy to use and very secure fitting. The fitting is 4 bar rated and to use simply remove the nut, slide it over the 13mm inside diameter LDPE pipe....
£2.52
Add:
3821840
£217.80
details Sold Out
HT521025
Heavy Duty Freestanding Hose Reel With Quick Couplings This freestanding professional hose reel is great when used with either 3/4" or 1" hose. Made from tubular steel with brass quick connections Professional...
£491.83
Add:
C623300
Naan Large Area Part Circle Metal Sprinkler 28 Metre Diameter Output 1.2 Cubic Metres Per Hour Full or part circle coverage 3/4" Femal Thread Ideal working pressure 2 bar Nozzle 4mm x 2.4
£39.53
details Sold Out
SP682012
Large Spiked Riser Ideal for field irrigation with thro flow Tee reducing pressure loss Use this riser on grass or soil Includes geka fittings Connect hose with geka hosetails More than 1 can be used in a run Use a geka blanking cap...
£41.70
details Sold Out
SP682019
Large Spiked Riser Ideal for field irrigation with thro flow Tee reducing pressure loss Use this riser on grass or soil Includes geka fittings Connect hose with geka hosetails More than 1 can be used in a run Use a geka blanking cap...
£42.98
Add:
LR52AG7519
Large High Capacity Stainless Steel Hose Reel Will Hold Up To 100 Metres Of 3/4" Hose Stainless steel drum and fram Solid rubber coated wheels Solid construction Made in Italy
£502.27
Add:
LR52AG2519
Large High Capacity Metal Hose Reel Will Hold Up To 100 Metres Of 3/4" Hose Mild Steel powder coated frame and reel Solid rubber coated wheels Solid construction Made in Italy
£245.20
details Sold Out
3415/0021A
Large Volume Spiked Sprinkler with 3/4" Thread Add a Geka Female Type Fitting (Z7230) to make it compatable with Geka fittings or a 3/4 inch tap connector to make it compatable with click fit hose fittings. Pressure range:...
£11.27
Add:
3414/0001A
Large Volume Spiked Sprinkler with Quick Click Hose Connection Simply click your hose onto the spike and push into the ground. You can place in the centre of a round lawn and adjust to a full circle or it can be adjusted to 90 degrees and...
£11.27
Add:
D710FBLK
710 Litre D Water Tank Height 90cm X Width 90cm X Depth 105 cm Made from industrial strength MDPE (Medium Density Polyethylene) the D710 Litres is a long lasting durable Water Tank. Designed to sit flush against a wall, allowing a downpipe to be...
£450.22
Add:
ECO500V2BLK
Slimline Water Tank 500 Litres Height 46cm X Width 101cm X Length 125cm This is a slim line water storage tank made from industrial grade MDPE so that it can resist UV light plus cold winter conditions. The water tank is formed as 1 part...
£421.99
Add:
107700800XXXUBA
Lowara Scuba 8SC6/15/5 C G L 20 UK with float 107700800XXXUBA Lowara Scuba SC series c/w 20m cable and Float Switch The new Lowara SCUBA compact close-coupled submersible pump from Xylem brings a new level of reliability and flexibility to primary...
£1,569.48
details Sold Out
E221010
Hose Adaptor 10 mm x 3/8" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£1.30
Add:
E221312
Hose Adaptor 13 mm x 1/2" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£1.34
Add:
E221319
Hose Adaptor 13 mm x 3/4" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£1.44
Add:
E222025
Hose Adaptor 20 mm x1" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£1.97
Add:
E222012
Hose Adaptor 20 mm x 1/2" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£1.66
Add:
E222019
Hose Adaptor 20 mm x 3/4" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£1.66
Add:
E222525
Hose Adaptor 25 mm x 1" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£1.99
Add:
E222532
Hose Adaptor 25 mm x 11/4" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.81
Add:
E222519
Hose Adaptor 25 mm x 3/4" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£1.82
Add:
E223225
Hose Adaptor 32 mm x 1" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£2.33
Add:
E223232
Hose Adaptor 32 mm x 11/4" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£3.53
Add:
E223840
Hose Adaptor 38 mm x 11/2" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£4.42
Add:
E223832
Hose Adaptor 38 mm x 11/4" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£3.99
Add:
E224040
Hose Adaptor 40 mm x 11/2" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£4.39
Add:
E224032
Hose Adaptor 40 mm x 11/4" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£4.30
Add:
E225040
Hose Adaptor 50 mm x 11/2" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£4.19
Add:
E225050
Hose Adaptor 50 mm x 2" BSP Male Thread Used for flexible hoses and suction pipes. Convers the hose to a BSP thread so that it can be attached to pumps, tank and equipment. The soze refers to the inside diameter of the...
£5.11
Add:
C212533
Tavlit Manifold Cross 1 x 1" BSp Male - 3 x 1" BSP Female Thread Ideal for building manifolds or for extending existing systems. Tavlit manifold fittings are made from high quality durable industrial grade plastic with...
£4.95
Add:
C213533
Tavlit Manifold Elbow 1" BSp Male - 1" BSP Female Thread Ideal for building manifolds or for extending existing systems. Tavlit manifold fittings are made from high quality durable industrial grade plastic with self sealing O...
£2.28
Add:
C214533
Tavlit Manifold Straight Connector 1" BSp Male - 1" BSP Female Thread Ideal for building manifolds or for extending existing systems. Tavlit manifold fittings are made from high quality durable industrial grade plastic...
£2.00
Add:
TAV34inch
Tavlit Manifold Straight Connector 3/4" BSp Male - 3/4" BSP Female Thread Ideal for building manifolds or for extending existing systems. Tavlit manifold fittings are made from high quality durable industrial grade...
£2.10
details Sold Out
C214033
Manifold Straigh Connector 1" Female/Female Thread Ideal for building manifolds or for extending existing systems. Tavlit manifold fittings are made from high quality durable industrial grade plastic with self sealing O Rings making...
£2.95
Add:
C213033
Manifold Swivel Elbow 1 Inch BSP Threads Female Ideal for building manifolds or for extending existing systems. Tavlit manifold fittings are made from high quality durable industrial grade plastic with self sealing O Rings making...
£3.08
Add:
C211033
Swivel Tee 2 x 1" Female 1 X 1" Male Thread Ideal for building manifolds or for extending existing systems. Tavlit manifold fittings are made from high quality durable industrial grade plastic with self sealing O Rings making...
£3.58
Add:
C32210333
Manifold Tee 1 inch Female Swivel x 2 1 inch Male Use with Timers or Bermad valves 1" BSP thread connections will fit most water timers and valves Use to create new manifolds or extend exsisting ones to create new zones.
£3.37
details Sold Out
C32190333
Manifold Tee 3 x 1" Threads Swivel Female Use with Timers or Bermad valves 1" BSP thread connections will fit most water timers and valves Use to create new manifolds or extend exsisting ones to create new zones. Built in...
£5.40
details Sold Out
ADPI
Mazzei Adjustable Injector Used to inject fertiliser or chemicals in to a water path. Can be used to inject air in some applications for example fish and pond tanks or to add treatments to pond water. Adjustable suction flow Comes...
£147.84
details Sold Out
DPI
Differential Pressure Injector Sizes 3/4" 1" and 11/2" Suitable for the introduction of chemicals in to the water supply for feeding of plants and other activities Pressure range 1.3 - 6.8 bar Micro Tube and Suction filter included To...
£97.90
details Sold Out
SR682505
Sled Riser 30cm With Elbow Base for end of line 1/2" BSP Male threaded top This metal industrial grade sled riser is ideal for watering large areas using many types of sprinkler. We are happy to advice which sprinkler top is...
£30.41
Add:
SR682510
Sled Riser 30cm With Elbow Base for end of line 3/4" BSP Male threaded top This metal industrial grade sled riser is ideal for watering large areas using many types of sprinkler. We are happy to advice which sprinkler top is...
£33.49
Add:
SR682515
Sled Riser 30cm With Tee through flow base This unit has a base with a tee connection so that multiple rises can be used in one run. A Geka cap can be purchased to finish the run or as an alternative purchase 1 standard base to finish...
£39.77
Add:
VDL8125110
PVC Socket Metric - Imperial 110mm - 4 Inch VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£10.17
Add:
CPAL31170606
6mm Elbow Push Fit Used with the standard flexible 6mm pipe this is a simple push fit elbow to make installation clean and tidy. When installing we would suggest heating the 6 mm polythene pipe up to using hot water and this will make...
£0.33
Add:
CPAL30640037
Micro Pipe Support Stakes 4 - 7 mm (Pack of 10) For holding 4 - 7 mm micro pipe in place along beds, also use for holding drippers in place in baskets or containers. Height - 15cms
£2.19
Add:
CPAL44126666
Mini Barbed Cross Piece 6mm Used with the standard flexible 6mm pipe this is a simple push fit cross piece to make installation clean and tidy. When installing we would suggest heating the 6 mm polythene pipe up using hot water and this will...
£0.88
Add:
C631000401000
Mistnet Single Outlet Nozzle APPLICATIONS Fine static mister especially designed for under canopy cooling and humidifying greenhouses. SPECIFICATIONS â– Bridgeless design eliminates dripping. â– Static mister. flow rate: 15 litres...
£0.98
Add:
EHSMPCS
MPCorner Rotator Nozzle The MP Corner is an 8-15' (2.5-4.6 meter)sprinkler designed for tight corners that are difficult to irrigate properly with conventional sprinklers. It has an adjustable arc from 45° to 105°, maintains MPR...
£10.22
Add:
EHSMPLCS
MP Left Strip Rotator Nozzle The Mp Left strip waters the area to the left of the sprinkler head if you were stood behind the nozzle The MP Left Strips irrigate an area 5’ x 15’ (1.5-4.6 m) at 30 PSI (2.1 bar) at full...
£10.22
Add:
EHSMPRCS
MPStrip Rotator Nozzle Right Strip The MPRight Strips irrigate an area 5’ x 15’ (1.5-4.6 m) at 30 PSI (2.1 bar) at full radius. Flow rate at rectangular spacing = .19 GPM (.72 LPM). When the radius is reduced the pattern is...
£10.22
Add:
EHSMP80SR-360
Hunter MP Rotator Nozzle 800SR 360 Degrees The Hunter Mp rotator short radius nozzle is ideal for smaller ares that require a distance of between 1.8n and 3.5 metres. The short radius nozzle should not be combined with standard Mp...
£10.22
Add:
EHSMP80SR-90
Hunter MP Rotator Nozzle 815SR 90-210 Degrees The Hunter Mp rotator short radius nozzle is ideal for smaller ares that require a distance of between 1.8n and 3.5 metres. The short radius nozzle should not be combined with standard Mp...
£10.22
Add:
EHSZMPTOOL
MP Rotator Key A tool for adjusting the MP Rotator sprinklers to the angle of which you would require. This is the simple and easy way to adjust it without any struggling if its tight. Arc Adjustm ent Install the MP Rotator with...
£1.79
Add:
EHSPROOS-00
Hunter Shrub Adapter Converts any 1/2" male thread so that an MP rotator can be used in a fixed situation ie a bed or a border. This makes a simple reliable border sprinkler that can then use the MP rotators superb coverage which...
£1.89
Add:
EHSMPSS
MP Side Strip Rotator Nozzle The MP Side Strip irrigates a strip 5’ x 30’ (1.5-9.1 m) at 30 PSI (2.1 bar) at full radius. Flow rate at rectangular spacing = .38 GPM (1.44 LPM). When the radius is reduced the pattern is 4’ x...
£10.22
Add:
EHSMP10-210
MP1000 Rotator Nozzle 210- 270 degrees 30% increased efficiency over conventional sprays The MP1000 Rotator is a 8-15' (2.5-4.6 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body...
£10.22
Add:
EHSMP10-60
MP1000 Rotator Nozzle 360 degrees 30% increased efficiency over conventional sprays The MP1000 Rotator is a 8-15' (2.5-4.6 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or...
£10.22
Add:
EHSMP10-090
MP1000 Rotator Nozzle 90 - 210 degrees 30% increased efficiency over conventional sprays The MP1000 Rotator is a 8-15' (2.5-4.6 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body...
£10.22
Add:
EHSMP20-210
MP2000 Rotator Nozzle 210 - 270 degrees The MP2000 Rotator is a 13-21' (4-6.4 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or shrub adapter. *To achieve maximum radius...
£10.22
Add:
EHSMP20-360
MP2000 Rotator Nozzle 360 degrees The MP2000 Rotator is a 13-21' (4-6.4 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or shrub adapter. *To achieve maximum radius reduction...
£10.22
Add:
EHSMP20-090
MP2000 Rotator Nozzle 90 - 210 degrees The MP2000 Rotator is a 13-21' (4-6.4 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or shrub adapter. *To achieve maximum radius...
£10.22
Add:
EHSMP30-210
MP3000 Rotator Nozzle 210 - 270 degrees THE MP3000 Rotator is a 22-30' (6.7-9 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or shrub adapter. *When operating the MP3000 at...
£10.22
Add:
EHSMP30-360
MP3000 Rotator Nozzle 360 degrees THE MP3000 Rotator is a 22-30' (6.7-9 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or shrub adapter. *When operating the MP3000 at full...
£10.22
Add:
EHSMP30-090
MP3000 Rotator Nozzle 90 - 210 degrees THE MP3000 Rotator is a 22-30' (6.7-9 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or shrub adapter. *When operating the MP3000 at...
£10.22
Add:
EHSMP35-90
MP3500 Rotator Nozzle 90 - 210 degrees THE MP3500 Rotator is a (9.4-10.7 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or shrub adapter. *When operating the MP3500 at full...
£10.22
Add:
C229123
Multi Stage Hose Adaptor 1" BSP Female Thread - 1/2" Or3/4" Or 1" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible...
£2.16
Add:
C229023
Multi Stage Hose Adaptor 1" BSP Male Thread - 3/4" Or 1" Or 11/4" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible...
£1.88
Add:
C229001
Multi Stage Hose Adaptor 1/2" BSP Male Thread - 3/8" Or 1/2" Or 3/4" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with...
£1.73
Add:
C229043
Multi Stage Hose Adaptor 11/2" BSP Male Thread - 3/4" Or 1" Or 11/4" Or 11/2" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for...
£2.93
Add:
C229134
Multi Stage Hose Adaptor 1/2" BSP Female Thread - 3/4" Or 1" Or 11/4" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with...
£2.71
Add:
C229034
Multi Stage Hose Adaptor 11/4" BSP Male Thread - 1" or 11/4" or 11/2" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with...
£2.18
Add:
C229012
Multi Stage Hose Adaptor 3/4" BSP Male Thread - 1/2" Or 3/4" Or 1" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with...
£1.60
Add:
UNI704600
£1,589.50
details Sold Out
C60042740
Naan Adjustable Plastic Sprinkler 940 LPH Suitable for use in higher flow situations or quite a high pressure main. The sprayer can be used as a part of full circle Plastic body Choice of part or full circle Adjustable height and range...
£10.39
Add:
C60042728
Naan Adjustable 450 LPH The Part or Full circle Nann sprinkler is probably the most suitable domestic sprinkler when used on a sledge or a tripod. The output is very suitable to take advantage of the flow from most domestic...
£10.39
Add:
C60502224
Naan 5022U Sprinkler Head 360 lph Spray Diameter Up to 19 Metres Great coverage at a low flow Low precipitation rate allows water time to soak in to the soil Wide spacing. When used as a field irrigation unit ...
£10.89
Add:
CZ3628
Eindor Femaqle Push Fit End to 3/8" Whitworth tapered thread This is used to thread in to PVC and MDPE pipe for spray runs in greenhouses etc
£0.29
Add:
CZ3631A
Netafim Anti Drain Valve male - Female The Anti Drain valve is used to shut the water off completley once the pressure drops. This makes sure that water does not drip on to the unlucky plant below it or that the water cannot continue to...
£1.21
Add:
90HOZENET
Netafim Elbow Hose Connector Used to push on to the end of a 16mm water pipe so that a standard 1/2" hose can be quickly clicked on and off at 90° to the pipe
£3.65
Add:
HWK100
Netafim Hedge Watering Kit 100 metres in Length This is a great kit that will water all the plants in your hedge evenly. The kit is for a single line of hedging and should be turned on every day for 30 mins. The amount of water needed to...
£132.00
Add:
HWK125
Netafim Hedge Watering Kit 125 metres in Length This is a great kit that will water all the plants in your hedge evenly. The kit is for a single line of hedging and should be turned on every day for 30 mins. The amount of water needed to...
£173.84
Add:
HWK150
Netafim Hedge Watering Kit 150 metres in Length This is a great kit that will water all the plants in your hedge evenly. The kit is for a single line of hedging and should be turned on every day for 30 mins. The amount of water needed to...
£219.12
Add:
HWK175
Netafim Hedge Watering Kit 175 metres in Length This is a great kit that will water all the plants in your hedge evenly. The kit is for a single line of hedging and should be turned on every day for 30 mins. The amount of water needed to...
£241.56
Add:
HWK200
Netafim Hedge Watering Kit 200 metres in Length This is a great kit that will water all the plants in your hedge evenly. The kit is for a single line of hedging and should be turned on every day for 30 mins. The amount of water needed to...
£237.60
Add:
HWK25
Netafim Hedge Watering Kit 25 metres in Length This is a great kit that will water all the plants in your hedge evenly. The kit is for a single line of hedging and should be turned on every day for 30 mins. The amount of water needed to...
£42.90
Add:
HWK50
Netafim Hedge Watering Kit 50 metres in Length This is a great kit that will water all the plants in your hedge evenly. The kit is for a single line of hedging and should be turned on every day for 30 mins. The amount of water needed to...
£73.00
Add:
HWK75
Netafim Hedge Watering Kit 75 metres in Length This is a great kit that will water all the plants in your hedge evenly. The kit is for a single line of hedging and should be turned on every day for 30 mins. The amount of water needed to...
£72.59
Add:
HOZENET
Netafim Hose Connector Used to push on to the end of a 16mm water pipe so that a standard 1/2" hose can be quickly clicked on and off
£4.28
Add:
PH1610
Netafim Pipe Header Pipe 16mm The pipe header is a standard 16 mm black water pipe ( no drips) This is used to carry the water to the areas that need drip irrigation installed 16mm supply tube used to for irrigation headers when...
details
CZ5545
Netafim non compensated drippers This 2 litre per hour button dripper makes easy work when installing and retro fitting drip irrigation to an existing system. Specification Maximum working pressure = 2 bar so if the pressure is...
£0.46
Add:
CZ5550
Netafim Woodpecker Dripper 4 lph Netafim non compensated drippers This 4 litre per hour button dripper makes easy work when installing and retro fitting drip irrigation to an existing system. Specification Maximum...
£0.46
Add:
CZ5555
Netafim non compensated drippers This 8 litre per hour button dripper makes easy work when installing and retro fitting drip irrigation to an existing system. Specification Maximum working pressure = 2 bar so if the pressure is...
£0.46
Add:
PDTT125
£82.50
details Sold Out
TECO905610
Ottima PC360 Pressure Compensated Dripper On A Stake 30 Litres Per Hour The Ottima dripper with pressure compensated valve offers a reliable dripper which is pressure compensated making sure that the same amount of water comes out of each...
£1.13
Add:
PAL30240105
Pal Stable Angled Sprayer 180º 105 L/H ) 4 Meter Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse or beds and...
£0.55
Add:
CPAL30240090
Pal Stable Angled Sprayer 180º 90 L/H 3.5 Metre Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse or beds...
£0.55
Add:
PAL30230040
Pal Stable Angled Sprayer 90º 40 L/H A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse or beds and borders....
£0.55
Add:
PAL30230090
Pal Stable Angled Sprayer 90º 90 L/H 3.5 Meter Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse or beds...
£0.55
Add:
CPAL30130105
Pal Stable Special Sprayer 360º 105 L/H 4 Metre Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse...
£0.55
Add:
CPAL30130120
Pal Stable Special Sprayer 360º 120 L/H 4.5 Metre Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse...
£0.55
Add:
PAL30130160
Pal Stable Special Sprayer 360º 160 L/H 5 Metre Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse...
£0.55
Add:
CPAL30130040
Pal Stable Special Sprayer 360º 40 L/H 2.5 meter Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse...
£0.55
Add:
CPAL30130070
Pal Stable Special Sprayer 360º 70 L/H 3 Metre Radius A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse or beds and...
£0.55
Add:
CPAL30130090
Pal Stable Special Sprayer 360º 90 L/H 3.5 meter Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse...
£0.55
Add:
PAL32410202
£0.26
Add:
PAL32410253
£0.58
Add:
35012633
£118.80
details Sold Out
C34070066
Palaplast Hydro Spin Screen Filter 60 Mesh This is a self adjustable Hydrocyclone filter with high output rates of 40 cubic metres per hour. The large stainless steel screen will filter down to 0.6 microns making this suitable for most...
£282.78
Add:
PAL31790217
Palaplast Tap 16mm T-Tape to a 3/4 Inch BSP Male thread
£2.77
Add:
02089462020
Netafim PCJ HCNL Pre Assembled Pressure Compensated Dripper With 80cm Lead and S Stake The pressure compensated dripper allows a set amount of water to drip per hour providing the pressure stays within the operating zone which is 0.5 -...
£0.61
Add:
02089462030
Netafim PCJ HCNL Pre Assembled Pressure Compensated Dripper With 80cm Lead and S Stake The pressure compensated dripper allows a set amount of water to drip per hour providing the pressure stays within the operating zone which is 0.5 -...
£0.61
Add:
PER69p1000
RollcarT Travelling Lawn Sprinkler Perrot's popular travelling sprinkler with full or part circle operation makes a great sports field irrigator. A wire is pulled out and staked down and the highly efficient water turbine automatically...
£1,524.44
Add:
C811022
Pipe Clamp 25mm A strong plastic pipe clip made to grip any 25mm outside diameter pipe. The grips are very sturdy and offer a very positive clip in fittings which is very hard to remove once the pipe is secured. The clamp is predrilled...
£0.75
Add:
CL811144
Pipe Clamp 40mm For securing 40mm PVC, LDPE and MDPE Pipe Use round head 8/10 screws With a 5mm screw hole
£1.30
Add:
C811177
Pipe Clamp 75mm 75mm Pipe clamp with retaining strap. These are made by VDL and will secure any 75 mm outside diameter water pipe. The fitting is very tough and UV stabilised so can be used in or outside. SEcured using a screw...
£3.53
Add:
C811199
Pipe Clamp 90mm 75mm Pipe clamp with retaining strap. These are made by VDL and will secure any 90 mm outside diameter water pipe. The fitting is very tough and UV stabilised so can be used in or outside. SEcured using a...
£4.45
Add:
PC13
Pipe Clip for 13mm inside diameter LDPE pipe Clip comes complete with a masonary nail and is used to secure LDPE pipe with a 13 mm inside diameter to walls, fences etc.
£4.87
Add:
CPC16
Pipe Clip 16mm Plastic 16mm pipe clip with masonry nail
£4.87
Add:
CPC6
Pipe Clip 6mm Plastic 6mm pipe clip with masonry nail. Ideal for secoring the 6 mm drip pipe to fences, walls etc
£2.13
Add:
C810820
Pipe Clip Blocks Used with the 20 mm pipe clamps. Used to space pipe bracket away from wall. Can be used in multiples for extra distance
£0.35
Add:
C810825
Pipe Clip Blocks Used with the 25 mm pipe clamps. Used to space pipe bracket away from wall. Can be used in multiples for extra distance
£0.39
Add:
C810832
Pipe Clip Blocks Used with the 32mm pipe clamps. Used to space pipe bracket away from wall. Can be used in multiples for extra distance
£0.49
Add:
C810840
Pipe Clip Blocks Used with the 40 mm pipe clamps. Used to space pipe bracket away from wall. Can be used in multiples for extra distance
£0.69
Add:
C810863
Pipe Clip Blocks Used with the 63 mm pipe clamps. Used to space pipe bracket away from wall. Can be used in multiples for extra distance
£1.15
Add:
VDL810875
Pipe Clip Blocks For 75 mm Pipe Clips This is used to space the 75 mm pipe clip away from the wall should more spaced be required
£1.87
Add:
PCWN16-20
Pipe Clips 16mm (Pack 25) Quick, neat way of fixing pipe Use to attach 16mm Supply tube to walls and fences Comes complete with masonary nail
£4.87
Add:
C70022102
Plasson Pipe Insert Plasson fitting for use with MDPE pipe. To achieve WRAS approval all Joints in MDPE must be lined with an appropriate product. This is to ensure any deformation of the pipe is minimized making for a more robust, water tight...
£1.04
Add:
C851200
Pipe Saddle 25mm saddle - 1/2" Female Thread (10Bar) Pipe saddles are used to make simple connections in to the side of a supply tube. The saddle is attached round the pipe and tightened up using the bolts supplied. A hole is...
£1.41
Add:
C851201
Pipe Saddle 25mm -3/4" Female BSP Thread Pipe saddles are used to make simple connections in to the side of a supply tube. The saddle is attached round the pipe and tightened up using the bolts supplied. A hole is then drilled...
£1.41
Add:
C851302
Pipe Saddle 32mm - 1" BSPF Female thread Pipe saddles are used to make simple connections in to the side of a supply tube. The saddle is attached round the pipe and tightened up using the bolts supplied. A hole is then drilled into...
£1.50
Add:
C851300
Pipe Saddle 32mm - 1/2" BSP thread 6 bar rated Pipe saddles are used to make simple connections in to the side of a supply tube. The saddle is attached round the pipe and tightened up using the bolts supplied. A...
£1.50
Add:
C851301
Pipe Saddle 32mm - 3/4" Female BSPF Thread Pipe saddles are used to make simple connections in to the side of a supply tube. The saddle is attached round the pipe and tightened up using the bolts supplied. A hole is then drilled...
£1.50
Add:
C851501
50mm Pipe Saddle Branch 1" Female thread 6 Bar Rated Clamps on to any 50mm outside diameter pipe and forms a seal. The main supply pipe can then be drilled to allow water to flow from the main supply pipe. The saddle thread is a...
£2.04
Add:
C851500
50mm Pipe Saddle Branch 3/4" Female thread 6 Bar Rated Clamps on to any 50mm outside diameter pipe and forms a seal. The main supply pipe can then be drilled to allow water to flow from the main supply pipe. The saddle thread is a...
£1.63
Add:
C840603
63mm Pipe Saddle - 1" BSP Female Thread 16 Bar Rated Saddles clamp on to a 63mm outside diameter pipe and have an O Ring round the threaded outlet. AS the bolts are tightened the O ring forms a seal. You then get your drill...
£7.35
Add:
C851602
63mm Pipe Saddle - 11/4" BSP Female Thread 6 Bar Rated Saddles clamp on to a 63mm outside diameter pipe and have an O Ring round the threaded outlet. AS the bolts are tightened the O ring forms a seal. You then get your...
£2.76
Add:
UNI851600
63mm Pipe Saddle - 3/4" BSP Female Thread 6 Bar Rated Saddles clamp on to a 63mm outside diameter pipe and have an O Ring round the threaded outlet. AS the bolts are tightened the O ring forms a seal. You then get your drill...
£2.49
Add:
C840903
Unifdelta 90mm Pipe Saddle - 1" BSP Female Thread 16 Bar Rated Saddles clamp on to a 63mm outside diameter pipe and have an O Ring round the threaded outlet. AS the bolts are tightened the O ring forms a seal. You then get...
£9.74
Add:
CPLASSON20TAP
Palsson Tap 20mm A top down servicable tap ideal for below ground installtion Fitting instructions Remove the blue nut and slid this over the pipe Slide the white grip ring over the pipe and slide it back from the pipe end...
£31.28
Add:
CPLASSON32TAP
Palsson Tap 32mm A top down servicable tap ideal for below ground installtion Fitting instructions Remove the blue nut and slid this over the pipe Slide the white grip ring over the pipe and slide it back from the pipe end...
£39.13
Add:
CPLA21028
63 mm Repair clamp Stainless steel repair clamp used to repair small cuts in main water supply pipes below or above ground. This is a simple clamp that is wrapped round the pipe in order to seal small cust that may have been caused by...
£23.30
details Sold Out
Z21036
Plasson Double Check Valve WRAS Approved 1" Female BSPF A remote double check valve that can be fitted to the main supply when taking directly from the mains. This item is essential and must be fitted after the Tee from your...
£81.61
Add:
PAL2560
Converter from Imperial to Metric 25mm Compression fitting Used to repair imperial pipe 3/4" group C
£3.50
Add:
C70022101
Plasson Pipe Insert Plasson fitting for use with MDPE pipe. To achieve WRAS approval all Joints in MDPE must be lined with an appropriate product. This is to ensure any deformation of the pipe is minimized making for a more robust, water tight...
£0.74
Add:
C70022103
Plasson Pipe Insert Plasson fitting for use with MDPE pipe. To achieve WRAS approval all Joints in MDPE must be lined with an appropriate product. This is to ensure any deformation of the pipe is minimized making for a more robust, water tight...
£1.10
Add:
C21188
Plasson Pipe Insert Plasson fitting for use with MDPE pipe. To achieve WRAS approval all Joints in MDPE must be lined with an appropriate product. This is to ensure any deformation of the pipe is minimized making for a more robust, water tight...
£1.69
Add:
CZ21190
Plasson Pipe Insert Plasson fitting for use with MDPE pipe. To achieve WRAS approval all Joints in MDPE must be lined with an appropriate product. This is to ensure any deformation of the pipe is minimized making for a more robust, water tight...
£2.77
Add:
C921599
Porous Pipe 16mm Diameter 100 metres In Length Standard Porous pipe or soaker hose is ideal for watering small borders or short lengths of newly planted hedges or shrubs. Porous pipe is designed to work at low pressures of between 4 and 12 psi...
£106.47
Add:
PP921550
Porous Pipe 16mm Diameter 50 metres In Length Standard Porous pipe or soaker hose is ideal for watering small borders or short lengths of newly planted hedges or shrubs. Porous pipe is designed to work at low pressures of between 4 and 12 psi...
£51.53
Add:
PP921030
Porous Pipe Or Soaker Hose 16 mm Diameter 30 metres in Length Standard Porous pipe or soaker hose is ideal for watering small borders or short lengths of newly planted hedges or shrubs. Porous pipe is designed to work at low pressures of...
£34.85
Add:
C922599
Micro Bore Porous Pipe 5mm 100 Metres In Length Micro bore porous pipe is great way to water hanging baskets and patio containers. The porous pipe can be looped round the basket or through the trough or container and will discreetly water the...
£60.03
Add:
NCKIT25
Micro Bore Porous Pipe 5mm 25 Metres In Length Micro bore porous pipe is great way to water hanging baskets and patio containers. The porous pipe can be looped round the basket or through the trough or container and will discreetly water the...
£16.49
Add:
C922550
Micro Bore Porous Pipe 5mm 50 Metres In Length Micro bore porous pipe is great way to water hanging baskets and patio containers. The porous pipe can be looped round the basket or through the trough or container and will discreetly water the...
£29.69
Add:
CZ5637A
Pot Pecker Drip Stake (10 Pack) Ideal to use with any dripper that feeds from the supply pipe using 6mm outside diameter flexible pipe. The 6mm O/D or 4mm I/D pipe pushes on to the end of the stake and then water will drip down the stake in to...
£1.42
Add:
Z5725
Potpecker 2 LPH Dripper Lead and Nipple (Pack 10) An easy to use dripper dripping at 2 lph with a cap so that the drip can be shut off to individual plants if required. An ideal dripper if plants and containers are moved about
£9.88
Add:
Naan3414/0001
Premium Metal Adjustable Lawn Sprinkler with Quick Connector Simply click your hose onto the spike and push into the ground. You can place in the centre of a round lawn and adjust to a full circle or it can be adjusted to 90 degrees and...
£18.40
Add:
C760511
Pressure Gauge 0-10 bar Bottom 1/4" Thread Glycerine Filled High quality oil filled pressure gauge Measures pressure from 1 - 10 bar Diameter 63mm Underside 1/4" male thread How to convert Bar to Psi :- Bar Pressure...
£10.56
details Sold Out
KRAIN15003-SS
ProCom Pop-Up Rotor with Shut off Suitable for industrial/ commercial sports turf rotor Easy Arc Set - adjusted from the top with a flat bladed screwdriver 2n1 adjustable or continuous adjustment Patented arc set degree markings - shows the...
£50.54
Add:
IHC520825
Professional Heavy Duty Industrial Metal Hose Cart A professional hose cart that will be in use 20 years from now. This is the ultimate hose cart for use in all commercial environments. The unit is supper strong and like the midi offers...
£560.10
details Sold Out
E881003
Punch pliers for pipe 16/20mm The punch pliers are normally for large installation that require many 100's of holes to be punched in to either 16 or 20mm LDPE Pipe. For smaller or domestic jobs please see the budget hand punch as this is...
£16.90
Add:
C881503
Punch pliers for pipe 25/32mm LDPE Outside Diameter Pipe Creates 3mm holes in piping for barbed fittings and drippers Fits comfortably in your hand and works just like pliers
£22.36
Add:
PFC16161616
Push Fit Cross for 13 mm The Cross is used to split runs from 1 - 3 outlets.
£1.01
Add:
C11041616
Push Fit Cross 16 mm The Cross is used to split runs from 1 - 3 outlets.
£1.31
Add:
3101/2012
Barbed Reducing Straight Connector 20mm - 12mm Used to reduce 20mm LDPE outside diameter pipe to 16mm. This is ideal when you are using long runs of pipe. Using 20mm pipe over long runs will make sure that you loose as little water flow...
£57.10
Add:
C31012016
Barbed Reducing Straight Connector 20mm - 16mm Used to reduce 20mm LDPE outside diameter pipe to 16mm. This is ideal when you are using long runs of pipe. Using 20mm pipe over long runs will make sure that you loose as little water flow...
£0.39
Add:
C805111
PVC Elbow 45 Degrees 20mm Glue Glue VDL is a producer of injection molded fittings for PVC . PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available in many sizes these...
£1.49
Add:
C805122
PVC Elbow 45 Degrees 25mm Glue Glue 16 bar rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.52
Add:
C805133
PVC Elbow 45 Degrees 32mm Glue Glue 16 bar rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.62
Add:
C805144
PVC Elbow 45 Degrees 40 mm Glue Glue 16 bar rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£2.47
Add:
C805155
PVC Elbow 45 Degrees 50mm Glue Glue 16 bar rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£2.59
Add:
C805166
PVC Elbow 45 Degrees 63mm 16 bar rated VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£4.53
Add:
C804211
PVC Elbow 90 Degrees 16 bar 20mm Glue Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£0.90
Add:
C804222
PVC Elbow 90 Degrees 16 bar 25mm Glue Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£0.97
Add:
C804233
PVC Elbow 90 Degrees 16 bar 32mm Glue Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.00
details Sold Out
C804244
PVC Elbow 90 Degrees 16 bar 40 mm Glue Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.44
Add:
C804255
PVC Elbow 90 Degrees 16 bar 50mm Glue Glue VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£2.18
Add:
C804612
PVC Elbow 90 Degrees Glue - Male Thread 20mm Outside diameter Pipe - 3/4" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£1.36
Add:
C804623
PVC Elbow 90 Degrees Glue - Male Thread 25mm Outside diameter Pipe - 1" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£1.55
Add:
C804844
PVC Elbow 90 Degrees Glue - Male Thread 40 mm Outside diameter Pipe - 11/4" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£3.83
Add:
C804644
PVC Elbow 90 Degrees Glue - Male Thread 40 mm Outside diameter Pipe - 11/4" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£1.91
Add:
C804811
PVC Elbow 90 Degrees Glue - Male Thread 20mm Outside diameter Pipe - 1/2" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£1.73
Add:
C804822
PVC Elbow 90 Degrees Glue - Male Thread 25mm Outside diameter Pipe - 3/4" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£2.08
Add:
C804833
PVC Elbow 90 Degrees Glue - Female Thread 32mm Outside diameter Pipe - 1" Female Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£2.81
Add:
C804855
PVC Elbow 90 Degrees Glue - Male Thread 50mm Outside diameter Pipe - 11/2" Male Thread VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£5.06
Add:
C804866
PVC Elbow 90 Degrees Glue -2 Inch Female Thread - 63 mm Outside diameter pipe VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines,...
£8.09
Add:
C804633
PVC Elbow 90 Degrees Glue - Male Thread 32mm Outside diameter Pipe - 1" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£1.66
Add:
C804634
PVC Elbow 90 Degrees Glue - Male Thread 32mm Outside diameter Pipe - 11/4" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£1.29
Add:
C7804632
PVC Elbow 90 Degrees Glue - Male Thread 32mm Outside diameter Pipe - 3/4" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£1.66
Add:
CVDLELBOW
PVC Elbow 90 Degrees Glue - Male Thread 50mm Outside diameter Pipe - 11/2" Male Thread VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£5.54
Add:
C804654
PVC Elbow 90 Degrees Glue - Male Thread 50mm Outside diameter Pipe - 11/4" Male Thread VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£2.70
Add:
C800511
PVC Equal Socket 16 Bar Pressure 20mm VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£0.54
details Sold Out
C800522
PVC Equal Socket 16 Bar Pressure 25mm VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£0.54
Add:
C800533
PVC Equal Socket 16 Bar Pressure 32mm VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£0.68
Add:
C800544
PVC Equal Socket 16 Bar Pressure 40 mm VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£1.10
Add:
C800555
PVC Equal Socket 16 Bar Pressure 50mm VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£1.41
Add:
C800566
PVC Equal Socket 16 Bar Pressure 63mm VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£2.11
Add:
VDL800577
PVC Equal Socket 16 Bar Pressure 75mm VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£3.63
Add:
VDL800599
PVC Equal Socket 16 Bar Pressure 90mm VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£6.56
Add:
C804443
PVC Reducing Elbow 90 Degrees 1 bar 40mm Glue 32mm Glue VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£1.73
Add:
C804453
PVC Reducing Elbow 90 Degrees 1 bar 50mm Glue 32mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£2.55
Add:
C804454
PVC Reducing Elbow 90 Degrees 1 bar 50mm Glue 40mm Glue VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£2.87
Add:
C812555
PVC Socket Metric - Imperial 50mm - 11/2 Inch VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.75
Add:
C812566
PVC Socket Metric - Imperial 63mm - 2 Inch VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£2.59
Add:
C807611
PVC Union 20mm Glue - 1/2" Female Thread 10 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£3.63
Add:
C807811
PVC Union 20mm Glue - 1/2" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£4.37
Add:
C807411
PVC Union 20mm Glue 16 Bar VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available...
£3.09
Add:
C807622
PVC Union 25mm Glue - 3/4" Female Thread 10 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£4.85
Add:
C807822
PVC Union 25mm Glue - 3/4" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£4.85
Add:
C807422
PVC Union 25mm Glue 16 Bar VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available...
£4.25
Add:
C807633
PVC Union 32mm Glue - 1" Female Thread 10 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£6.32
Add:
C807833
PVC Union 32mm Glue - 1" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£6.32
Add:
C807433
PVC Union 32mm Glue 16 Bar VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available...
£6.32
Add:
C807444
PVC Union 40mm Glue 16 Bar VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available...
£6.40
Add:
C807855
PVC Union 50mm Glue - 11/2" Male Thread 16 Bar Rated VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£7.71
Add:
C807455
PVC Union 50mm Glue 16 Bar VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available...
£6.69
Add:
C807866
PVC Union 63mm Glue - 2" Male Thread 16 Bar Rated VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£12.57
Add:
C807666
PVC Union 63mm Glue - 2" Female Thread 10 Bar Rated VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£12.70
Add:
C807466
PVC Union 63mm Glue 16 Bar VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available...
£10.84
Add:
VDL807477
PVC Union 75mm Glue 16 Bar VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available...
£26.50
Add:
VDL807499
PVC Union 90mm Glue 16 Bar VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available...
£41.67
Add:
C808732
PVC -U REducing Nipple 1" - 3/4" BSP Thread PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage...
£2.20
Add:
C808754
PVC -U REducing Nipple 11/2" - 11/4" BSP Thread PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage...
£4.06
Add:
C808721
PVC -U REducing Nipple 3/4" - 1/2" BSP Thread PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage...
£1.90
Add:
C808711
PVC U Threaded Nipple 3/4" PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry Sanitary and...
£1.46
Add:
CVDL808755
PVC U Threaded Nipple 11/2" BSP PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry Sanitary...
£3.85
Add:
CVDL808744
PVC U Threaded Nipple 11/4" BSP PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry Sanitary...
£2.59
Add:
C809599
PVC U Threaded Nipple 3" PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry Sanitary and swimming...
£25.63
Add:
C808722
PVC U Threaded Nipple 3/4" PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry Sanitary and...
£1.73
Add:
C803111
PVC Equal Tee 16 Bar Rated 20mm x 20mm x 20mm (Outside Pipe Diameter ) VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA...
£1.28
Add:
C803433
Tee With 45°Branch 32x32x32 16 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are suitable...
£5.98
Add:
C803444
PVC Tee with branch at 45 degrees 16 Bar Rated 40mm x 40mm x 40mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold...
£7.28
Add:
C803455
PVC Tee with branch at 45 degrees 16 Bar Rated 50mm x 50mm x 50mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold...
£8.76
Add:
C803466
PVC Tee with branch at 45 degrees 16 Bar Rated 63mm x 63mm x 63mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold...
£13.72
Add:
VDL803477
PVC Tee with branch at 45 degrees 16 Bar Rated 75mm x 75mm x 75mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold...
£20.76
Add:
C803553
PVC 50mm Tee With 1" Male Threaded Branch VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£3.13
Add:
c803555
PVC 50mm Tee With 11/2" Male Threaded Branch VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£3.24
Add:
VDL803565
PVC Equal Tee 63mm - 11/2" male threaded branch VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£5.70
Add:
MP500610100
PVC 6mm Micro Pipe A flexible micro pipe used for distributing water to pots and containers Used for discreet plant watering Made in Greece For connecting Micro sprinklers and drippers to main distribution tube 6mm Outside...
£32.99
Add:
MP500610
PVC 6mm Micro Pipe A flexible micro pipe used for distributing water to pots and containers Used for discreet plant watering Made in Greece For connecting Micro sprinklers and drippers to main distribution tube 6mm Outside...
£13.20
Add:
MP50061050
PVC 6mm Micro Pipe A flexible micro pipe used for distributing water to pots and containers Used for discreet plant watering Made in Greece For connecting Micro sprinklers and drippers to main distribution tube 6mm Outside...
£19.80
Add:
C802311
PVC Connector 20mm Glue - 1/2" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£0.72
Add:
C802312
PVC Connector 20mm Glue - 3/4" Male Thread 16 Bar Rated VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump...
£0.89
Add:
C802322
PVC Connector 25 or 32 mm Glue - 3/4" Male Thread 16 Bar Rated ( The Glue Fitting takes 32mm on the outside or 25mm on the inside VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are...
£0.79
Add:
C802623
PVC Connector 25/32mm Glue - 1" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump...
£0.72
Add:
C802321
PVC Connector 25mm Glue - 1/2" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£1.23
Add:
C802333
PVC Connector 32 or 40 mm Glue - 1" Male Thread 16 Bar Rated ( The Glue Fitting takes 40 mm with a 40 mm straight connector or 32mm on the inside VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC...
£0.87
Add:
C802331
PVC Connector 32 or 40 mm Glue - 1/2" Male Thread 16 Bar Rated ( The Glue Fitting takes 40 mm with a 40 mm straight connector or 32mm on the inside VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC...
£1.23
Add:
C802332
PVC Connector 32 or 40 mm Glue - 3/4" Male Thread 16 Bar Rated Suitable for 32mm outside diameter pipe or 40mm outside diameter pipe with a socket VDL is a producer of injection molded fittings for PVC and PE pressure pipe...
£0.86
Add:
C802334
PVC Connector 32 mm Glue - 11/4" Male Thread 16 Bar Rated Suitable for 32mm Outside diameter PVC Pipe VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use...
£0.94
Add:
C802343
PVC Connector 40 or 50mm Glue - 1" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump...
£1.33
Add:
C802345
PVC Connector 40 or 50mm Glue - 11/2" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip...
£1.32
Add:
C802344
PVC Connector 50mm Glue - 11/4" Male Thread 16 Bar Rated PLEASE NOTE When using with 50mm outside diameter PVC pipe you will need a fitting to slide over the 50mm end. This fittings can be any elbows, striaghts or Tees VDL is...
£1.36
Add:
C802354
PVC Connector 63/50mm Glue - 11/4" Male Thread 16 Bar Rated The inside diameter will take a 50 mm PVC pipe and the outside a 63 mm VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are...
£2.34
Add:
C802355
PVC Connector 63mm Glue - 11/2" Male Thread 16 Bar Rated VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines,...
£2.34
Add:
C802356
PVC Connector 63/50mm Glue - 2" Male Thread 16 Bar Rated This fitting works with both 50 and 63mm outside diameter pipe. A 50mm pipe will fit inside the fitting or a 63mm fitting will fit inside a 63mm connector VDL is a...
£2.34
Add:
C802366
PVC Connector 75/63mm Glue - 2" Male Thread 16 Bar Rated This fitting works with both 75 and 63mm outside diameter pipe. A 63mm pipe will fit inside the fitting or a 75mm fitting will fit inside a 63mm connector VDL is a...
£3.84
Add:
VDL802367
PVC Connector 75/63mm Glue - 21/2" Male Thread 16 Bar Rated This fitting works with both 75 and 63mm outside diameter pipe. A 63mm pipe will fit inside the fitting or a 75mm fitting will fit inside a 63mm connector VDL is a...
£4.27
details Sold Out
VDL802376
PVC Connector 75 or 90mm Glue - 2" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump...
£5.91
Add:
VDL802365
PVC Connector 75mm Glue - 11/2" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump...
£3.40
Add:
VDL802398
PVC Connector 90/110mm Glue - 3" Male Thread 16 Bar Rated This fitting works with both 90 and 110mm outside diameter pipe. A 90mm pipe will fit inside the fitting or a 110mm fitting will fit inside a 110mm connector VDL is a...
£14.97
Add:
C812511
Conversion Socket From Metric to Imperial Outside Diameter Pipe 20mm Metric to 1/2" imperial VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications...
£0.67
Add:
C812522
Conversion Socket From Metric to Imperial Outside Diameter Pipe 25mm Metric to 3/4" imperial VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications...
£0.72
Add:
C812533
Conversion Socket From Metric to Imperial Outside Diameter Pipe 32mm Metric to 1" imperial VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications...
£0.89
Add:
C812544
Conversion Socket From Metric to Imperial Outside Diameter Pipe 40mm Metric to 11/4" imperial VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications...
£1.34
Add:
C804266
PVC Elbow 90 Degrees 16 bar 63mm Glue Glue VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£4.77
Add:
VDL804277
PVC Elbow 90 Degrees 16 bar 75mm Glue Glue VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£7.31
Add:
VDL804299
PVC Elbow 90 Degrees 16 bar 90mm Glue Glue VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£11.09
Add:
C806711
PVC End Cap 20mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available in...
£1.00
Add:
C806722
PVC End Cap 25mm Glue VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available in...
£0.92
Add:
C806733
PVC End Cap 32mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available in...
£1.19
Add:
C806744
PVC End Cap 40mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available in...
£1.48
Add:
C806755
PVC End Cap 50mm Glue VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available in...
£2.08
Add:
C806766
PVC End Cap 63mm Glue VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available in...
£3.10
Add:
VDL806777
PVC End Cap 75mm Glue 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£5.76
Add:
VDL806799
PVC End Cap 90mm Glue 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£7.98
Add:
C803122
PVC Equal Tee 16 Bar Rated 25mm x 25mm x 25mm (Outside Pipe Diameter ) VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA...
£1.09
Add:
C803133
PVC Equal Tee 16 Bar Rated 32mm x 32mm x 32mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£1.28
Add:
C803144
PVC Equal Tee 10 Bar Rated 40 mm x 40 mm x 40 mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£1.84
Add:
C803155
PVC Equal Tee 16 Bar Rated 50mm x 50mm x 50mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£2.61
Add:
C803166
PVC Equal Tee 16 Bar Rated 63mm x 63mm x 63mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£5.59
Add:
VDL803177
PVC Equal Tee 16 Bar Rated 75mm x 75mm x 75mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£8.10
Add:
VDL803199
PVC Equal Tee 16 Bar Rated 90mm x 90mm x 90mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£13.59
Add:
C802323
PVC Connector 25 or 32 mm Glue - 1" Male Thread 16 Bar Rated ( The Glue Fitting takes 32mm on the outside or 25mm on the inside VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable...
£0.91
Add:
C806211
PVC Equal Crosses 10 Bar Pressure 20mm Glue VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£2.08
Add:
C806233
PVC Equal Crosses 16 Bar Pressure 32mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£5.50
Add:
C806244
PVC Equal Crosses 16 Bar Pressure 42mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£8.01
Add:
C806255
PVC Equal Crosses 16 Bar Pressure 50mm Glue VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£8.47
Add:
C806266
PVC Equal Crosses 16 Bar Pressure 63mm Glue VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£10.98
Add:
PVCP501075
PVC 10 Bar rated Water Pipe 50mm Outside diameter. High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable for the...
£3.70
Add:
PVCP257590
PVC 10 Bar rated Water Pipe 25mm Outside diameter. High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable for the...
£1.91
Add:
PVCP2090
PVC 10 Bar rated Water Pipe 20mm Outside diameter. High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable for the...
£1.79
Add:
PVCP3210
PVC 10 Bar rated Water Pipe 32mm Outside diameter. Wall thickness 1.8mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable...
£3.00
Add:
PVCP3210
PVC 10 Bar rated Water Pipe 32mm Outside diameter. Wall thickness 1.8mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable...
£3.70
Add:
Z1505200
PVC 10 Bar rated Water Pipe 20mm Outside diameter. Wall thickness 1.2mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is...
£2.81
Add:
115425
PVC 7.5 Bar rated Water Pipe 20mm Outside diameter. Wall thickness 1mm Because of the length of this product a delivery surcharge will be applied on small orders at the checkout. This is because it has to travel with a specialist courier...
£5.24
Add:
Min: 10
115435
PVC 7.5 Bar rated Water Pipe 25mm Outside diameter. Wall thickness 1.25mm Because of the length of this product a delivery surcharge will be applied on small orders at the checkout. This is because it has to travel with a specialist...
£7.61
Add:
Min: 10
Z1510200
PVC 10 Bar rated Water Pipe 25mm Outside diameter. Wall thickness 1.25mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable...
£3.83
Add:
115001
PVC 10 Bar rated Water Pipe 32mm Outside diameter. Wall thickness 1.8mm Because of the length of this product a delivery surcharge will be applied on small orders at the checkout. This is because it has to travel with a specialist...
£11.89
Add:
Min: 10
Z1515200
PVC 10 Bar rated Water Pipe 32mm Outside diameter. Wall thickness 1.8mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is...
£5.15
Add:
Z154520
PVC 10 Bar rated Water Pipe 40mm Outside diameter. Wall thickness 2.0mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is...
£6.86
Add:
C115250
PVC 10 Bar rated Water Pipe 40mm Outside diameter. Wall thickness 2.0mm Because of the length of this product a delivery surcharge will be applied on small orders at the checkout. This is because it has to travel with a specialist...
£12.92
Add:
PVCP4010
PVC 10 Bar rated Water Pipe 40mm Outside diameter. Wall thickness 2.4mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable...
£3.32
Add:
Z154620
PVC 10 Bar rated Water Pipe 50mm Outside diameter. Wall thickness 2.0mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is...
£9.04
Add:
C115270
PVC 10 Bar rated Water Pipe 50mm Outside diameter. Wall thickness 2.4mm Because of the length of this product a delivery surcharge will be applied on small orders at the checkout. This is because it has to travel with a specialist...
£26.27
Add:
Z15652
PVC 10 Bar rated Water Pipe 63mm Outside diameter. Wall thickness 2.4mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable...
£11.41
Add:
115285
PVC 10 Bar rated Water Pipe 63mm Outside diameter. Wall thickness 2.4mm Because of the length of this product a delivery surcharge will be applied on small orders at the checkout. This is because it has to travel with a specialist...
£20.06
Add:
PVCPIPE1
PVC 10 Bar rated Water Pipe 63mm Outside diameter. Wall thickness 2.4mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable...
£6.26
Add:
Z15702
PVC 10 Bar rated Water Pipe 75mm Outside diameter. Wall thickness 2.4mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is...
£16.54
details Sold Out
115295
PVC 10 Bar rated Water Pipe 75mm Outside diameter. Wall thickness 2.4mm Because of the length of this product a delivery surcharge will be applied on small orders at the checkout. This is because it has to travel with a specialist...
£29.38
details Sold Out
PVCP7590
PVC 10 Bar rated Water Pipe 75mm Outside diameter. Wall thickness 2.9mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable...
£8.92
Add:
Z1585200
PVC 10 Bar rated Water Pipe 90mm Outside diameter. Wall thickness 2.4mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is...
£24.89
details Sold Out
115305
PVC 10 Bar rated Water Pipe 90mm Outside diameter. Wall thickness 2.4mm Because of the length of this product a delivery surcharge will be applied on small orders at the checkout. This is because it has to travel with a specialist...
£41.79
details Sold Out
PVCP9010
PVC 10 Bar rated Water Pipe 90mm Outside diameter. Wall thickness 2.9mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable...
£11.87
details Sold Out
C835020
PVC 7.5 Bar rated Water Pipe 50mm Outside diameter. Wall thickness 2mm Because of the length of this product a delivery surcharge will be applied on small orders at the checkout. This is because it has to travel with a specialist courier...
£18.22
Add:
C806443
PVC Pipe Fitting Crosses 16 Bar Pressure 32X32mm X40mmX40mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip...
£6.99
Add:
C801453
PVC Reducing Bush 2X Glue 16 Bar 50mm x 32mm VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.44
Add:
C801454
Threaded PVC Reducing Bush 2X Glue 16 Bar 50mm x 40mm VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.04
Add:
C801475
Threaded PVC Reducing Bush 2X Glue 16 Bar 75mm x 50mm VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£3.21
Add:
CVDL801476
Threaded PVC Reducing Bush 2X Glue 16 Bar 75mm x 63mm PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage...
£4.56
Add:
CVDL801421
Threaded PVC Reducing Bush 2X Glue 16 Bar 25mm x 20mm VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£0.89
Add:
CVDL801431
Threaded PVC Reducing Bush 2X Glue 16 Bar 32mm x 20mm PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage...
£0.89
Add:
CVDL801432
Threaded PVC Reducing Bush 2X Glue 16 Bar 32mm x 25mm PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry...
£0.94
Add:
C801443
Threaded PVC Reducing Bush 2X Glue 16 Bar 40mm x 32mm VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£0.79
Add:
VDL801463
Threaded PVC Reducing Bush 2X Glue 16 Bar 63mm x 32mm VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.84
Add:
VDL801464
Threaded PVC Reducing Bush 2X Glue 16 Bar 63mm x 40mm VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.84
Add:
C801465
Threaded PVC Reducing Bush 2X Glue 16 Bar 63mm x 50mm VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.86
Add:
VDL801495
Threaded PVC Reducing Bush 2X Glue 16 Bar 90mm x 50mm VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£5.21
Add:
VDL801497
Threaded PVC Reducing Bush 2X Glue 16 Bar 90mm x 75mm VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£8.07
Add:
C803331
Reducing Tee Branch Reduced 32x32x20 16 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£1.64
Add:
C803332
Reducing Tee Branch Reduced 32x32x25 16 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£1.62
Add:
C803352
Reducing Tee Branch Reduced 50x50x25 16 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified...
£2.92
Add:
C803353
Reducing Tee Branch Reduced 50x50x32 10 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£2.58
Add:
VDL803363
Reducing Tee Branch Reduced 63x63x32 16 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£5.15
Add:
C803365
Reducing Tee Branch Reduced 63x63x50 10 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£5.81
Add:
VDL803395
Reducing Tee Branch Reduced 90x90x50 16 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£14.29
Add:
Z2599
Reducing Tee Branch Reduced 90x90x63 16 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£22.30
Add:
VDL803373
PVC Reducing Tee 16 Bar Rated 75mm x 75mm x 32mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£8.10
Add:
VDL803374
PVC Reducing Tee 16 Bar Rated 75mm x 75mm x 40mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£8.12
Add:
VDL803375
PVC Reducing Tee 16 Bar Rated 75mm x 75mm x 50mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£8.10
Add:
VDL803376
PVC Reducing Tee 16 Bar Rated 75mm x 75mm x 63mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£8.10
Add:
C807222
PVC Socketed Union 3/3 25mm 7.5 Bar Rated An ideal fitting to join lines together if ever they need to be made easilly removable VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are...
£5.06
Add:
C807233
PVC Socketed Union 3/3 32mm 7.5 Bar Rated An ideal fitting to join lines together if ever they need to be made easilly removable VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are...
£5.06
Add:
C805733
VDL 45º Swept Elbow 10 Bar Rated 32 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£1.79
Add:
C805740
VDL 45º Swept Elbow 10 Bar Rated 40 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£2.05
Add:
C805855
VDL 45º Swept Elbow 10 Bar Rated 50 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£3.63
Add:
C805866
VDL 45º Swept Elbow 16 Bar Rated 63 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£7.13
Add:
C805877
VDL 45º Swept Elbow 10 Bar Rated 75mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£9.94
Add:
C805433
VDL 90º Swept Elbow 10 Bar Rated 32 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£2.04
Add:
C805444
VDL 90º Swept Elbow 10 Bar Rated 40 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£3.29
Add:
C805555
VDL 90º Swept Elbow 10 Bar Rated 50 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£4.14
Add:
C805566
VDL 90º Swept Elbow 10 Bar Rated 63 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£8.95
Add:
VDL805477
VDL 90º Swept Elbow 10 Bar Rated 75 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£9.29
details Sold Out
C808112
Tank Connector 20/25mm PVC Pipe 3/4" Male Thread With Clamp and Washer The VDL tank connector is rated to 16 bar. Made from PVC the fitting can be used for outlets and overflows in most plastic water tanks. The fitting will take...
£12.20
Add:
C808123
Tank Connector 25/32mm PVC Pipe 1" Male Thread With Clamp and Washer The VDL tank connector is rated to 16 bar. Made from PVC the fitting can be used for outlets and overflows in most plastic water tanks. The fitting will take 25mm...
£13.14
Add:
C808134
Tank Connector 32/40mm PVC Pipe 11/4" Male Thread With Clamp and Washer The VDL tank connector is rated to 16 bar. Made from PVC the fitting can be used for outlets and overflows in most plastic water tanks. The fitting will take...
£14.67
Add:
C808145
Tank Connector 40/50mm PVC Pipe 1 3/4" Male Thread With Clamp and Washer The VDL tank connector is rated to 16 bar. Made from PVC the fitting can be used for outlets and overflows in most plastic water tanks. The fitting will...
£17.65
Add:
C808156
Tank Connector 50-63mm PVC Pipe 2" Male Thread With Clamp and Washer The VDL tank connector is rated to 16 bar. Made from PVC the fitting can be used for outlets and overflows in most plastic water tanks. The fitting will take...
£19.11
Add:
C808266
Tank Connector 50 PVC Pipe 2" Male Thread With Clamp and Washer The VDL tank connector is rated to 16 bar. Made from PVC the fitting can be used for outlets and overflows in most plastic water tanks. The fitting will take either 63...
£18.36
Add:
C808167
Tank Connector 63-75mm PVC Pipe 21/2" Male Thread With Clamp and Washer The VDL tank connector is rated to 16 bar. Made from PVC the fitting can be used for outlets and overflows in most plastic water tanks. The fitting will take...
£39.15
details Sold Out
C808178
Tank Connector 63-75mm PVC Pipe 3" Male Thread With Clamp and Washer The VDL tank connector is rated to 16 bar. Made from PVC the fitting can be used for outlets and overflows in most plastic water tanks. The fitting will take...
£46.19
Add:
C803533
VDL PVC Tee 32mm x 1" BSP Male Branch X 32mm
£2.01
Add:
C803944
PVC Tee With Female Threaded Branch 10 Bar Rated 40 mm x 40 mm x 11/4" BSPF Threaded branch VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold...
£3.24
Add:
Z2646
PVC Tee Male Threaded With Glue Branch 1/2" BSP x 11/2" BSP and then branch 50mm Glue VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water...
£3.19
Add:
C803643
PVC Tee Male Threaded With Glue Branch 1/4" Bsp x 11/4" BSP and then branch 32mm Glue VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water...
£1.57
Add:
C803911
PVC Tee With Female Threaded Branch 10 Bar Rated 20mm x 20mm x 1/2" Threaded branch VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water...
£2.10
Add:
C803922
PVC Tee With Female Threaded Branch 10 Bar Rated 25mm x 25mm x 3/4" Threaded branch VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water...
£2.52
Add:
C803933
PVC Tee With Female Threaded Branch 10 Bar Rated 32mm x 32mm x 1" Threaded branch VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water...
£3.19
Add:
C803955
PVC Tee With Female Threaded Branch 10 Bar Rated 50mm x 50mm x 11/2" Threaded branch VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water...
£5.68
Add:
C803966
PVC Tee With Female Threaded Branch 10 Bar Rated 63mm x 63mm x 2" Threaded branch VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water...
£8.40
Add:
CVDL801710
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 20mm x 1/4" PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water...
£1.66
Add:
C801721
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 25mm x 1/2" VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines,...
£1.55
Add:
C801731
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 32mm x 1/2" VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines,...
£1.84
Add:
C801732
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 32mm x 3/4" Female BSPF VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£1.84
Add:
C801743
PVC Threaded Reducing Bush 40mm X 1" VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.41
Add:
C801753
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 50mm x 1" VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines,...
£3.10
Add:
C801754
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 50mm x 11/4" VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines,...
£3.10
Add:
C801765
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 63mm x 11/2" VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines,...
£5.00
Add:
VDL801775
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 75mm x 11/2" VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines,...
£7.91
Add:
VDL801776
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 75mm x 2"BSPF VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£7.91
Add:
C807844
PVC Union 40mm Glue - 11/4" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£7.35
Add:
C807655
PVC Union 50mm Glue - 11/2" Female Thread 10 Bar Rated VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£8.05
Add:
C808933
PVC- U Threaded End Cap and Washer 1" BSP PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry...
£0.89
Add:
C808944
PVC- U Threaded End Cap and Washer 11/4" BSP PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry...
£1.39
Add:
C808922
PVC- U Threaded End Cap and Washer 3/4" BSP PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry...
£0.89
Add:
C808311
VDL PVC - U PLug 1/2" BSP PVC-U - Solvent cement jointing: 10 mm up to 400 mm - Solvent cement jointing: 1/4” up to 6” - Threaded fittings: 1/4” up to 8” BSP PVC-U is a Polyvinylchloride without plasticizers...
£1.44
Add:
C808322
VDL PVC - U PLug 3/4" BSP PVC-U - Solvent cement jointing: 10 mm up to 400 mm - Solvent cement jointing: 1/4” up to 6” - Threaded fittings: 1/4” up to 8” BSP PVC-U is a Polyvinylchloride without plasticizers...
£1.44
Add:
3PRDBR
Rain Water Diverter 3P Brown High volume diverter with fine stainless steel filter to keep collected water clear and fresh Filter is easily removed for cleaning Filter will connect directly on to the Easy 750 litre wall butt.
£55.77
Add:
CTRAN240-24ac
Rainbird Transformer converts 240 volt ac to 24 volts ac output Ideal for use with the digital Humidity/thermostat
£27.49
Add:
ECO75V2BLK
Rectangular Water Tank 75 Litres Black Height 31cm X Width 44.5 cm X Length 60 cm The tank is constructed from MDPE making this a very strong a durable water tank that can be used both in and outside. The tank can be modified adding...
£134.06
Add:
ECO75V1BLK
Rectangular Water Tank 75 Litres Black Height 44.5cm X Width 31 cm X Length 60 cm The tank is constructed from MDPE making this a very strong a durable water tank that can be used both in and outside. The tank can be modified adding...
£134.06
Add:
ECO75V3BLK
Rectangular Water Tank 75 Litres Black Height 60cm X Width 44.5 cm X Length 31 cm The tank is constructed from MDPE making this a very strong a durable water tank that can be used both in and outside. The tank can be modified adding...
£134.06
Add:
CVDL8014117
Threaded PVC Reducing Bush 2X Glue 16 Bar 110mm x 75mm PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry...
£11.07
Add:
VDL8014119
Threaded PVC Reducing Bush 2X Glue 16 Bar 110mm x 90mm VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£8.82
Add:
C33020301
Reducing Nipple 1" - 1/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used in...
£0.70
Add:
C33020302
Reducing Nipple 1" - 3/4" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used in...
£0.86
Add:
C33020503
Reducing Nipple 11/2" - 1" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used...
£2.46
Add:
C33020405
Reducing Nipple 11/2" - 11/4" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes...
£2.62
Add:
C33020403
Reducing Nipple 11/4" - 1" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used...
£1.04
Add:
C33020402
Reducing Nipple 11/4" - 3/4" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used...
£1.28
Add:
C005138
Reducing Nipple 2" - 1/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used in...
£1.55
Add:
C33020506
Reducing Nipple 2" - 11/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used...
£2.49
Add:
C33020604
Reducing Nipple 2" - 11/4" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used...
£2.46
Add:
C33020201
Reducing Nipple 3/4" - 1/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used...
£0.36
Add:
PAL3352/0301
Reducing Socket 1" - 1/2" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU Pressure rated to 10 bar How to measure a thread size All (or most)...
£0.80
Add:
00-20-40
Reducing Socket 1" - 3/4" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU Pressure rated to 10 bar How to measure a thread size All (or most)...
£0.77
Add:
PAL3352/0504
Reducing Socket 11/2" - 11/4" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU Pressure rated to 10 bar How to measure a thread size All (or most)...
£2.57
Add:
C33520403
Reducing Socket 11/4" - 1" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU Pressure rated to 10 bar How to measure a thread size All (or most)...
£2.02
Add:
PAL3352/0605
Reducing Socket 2" - 11/2" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU Pressure rated to 10 bar How to measure a thread size All (or most)...
£3.50
Add:
C33520604
Reducing Socket 2" - 11/4" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU Pressure rated to 10 bar How to measure a thread size All (or most)...
£3.39
Add:
C33520201
Reducing Socket 3/4" - 1/2" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU Pressure rated to 10 bar
£0.70
Add:
3352/0201
Reducing Socket 3/4" - 1/2" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU Pressure rated to 10 bar
£0.58
Add:
C31042012
Reducing Push Fit Tee 20mm x20mm x12mm Can be used with any LDPE 20mm or 16mm. The connector is made from a strong industrial grade UV stabilsed plastic. The connector can be used on any thin walled pipe like LDPE water pipe or...
£0.56
Add:
C31042016
Reducing Push Fit Tee 20mm x20mm x16mm Can be used with any LDPE 20mm or 16mm. The connector is made from a strong industrial grade UV stabilsed plastic. The connector can be used on any thin walled pipe like LDPE water pipe or...
£0.56
Add:
REG69K2500
Rega Rainking or Rainmobile sprinkler An idea sprinkler for watering playing fields/ pitches. The rainmobile is a professional sprinkler that can water the complete pitch in just 2 runs. The unit can is suitable for night operation...
£1,319.21
Add:
STCPVCflat
Reinforced Flat PVC Storage Tank Cover Heavy duty PVC cover is lightfast, but has small drainage holes fitted to enable rainwater to enter the tank. Includes ball valve cover and ratchet webbing to secure. Available in diameter sizes between...
£376.12
details
STCmesh
Reinforced PVC Storage Tank Green Mesh Storage Tank cover Green mesh cover for galvanised storage tank. Allows rain to enter the tank but reduces light penetration by 70%. Includes ball valve cover and ratchet webbing to secure. Available in...
£248.72
details
CGEK150007F
Suitable for Geka Hand lance. A fine spray thread on aluminium rose 3/4" female thread
£9.74
Add:
CEBRING
Pack Of 10 Replacement O Rings Compatible with standard plastic and brass quick release hose fittings This O ring is used on the male end of all standard quick click hose couplings ...
£1.97
Add:
09PW22
Replacement Nitrile Rubber Seals For Brass Hose Tails Pack Of 5 Outside diameter 24mm x inside diameter 18mm x 2mm Thickness This is a replacemen seal used with some hose tails Outoside diameter 24mm Inside Diameter 18mm 2mm...
£1.36
Add:
C590010
Rotoframe Brass Sprinkler Head 8 - 14m Coverage 1/2" BSPF thread Ideal presure 0.5-2 bar Heavy droplet size makes sure that wind has a reduced effect on the distribution of water Sturdy brass construction Works well with most existing systems...
£12.41
Add:
C590011
Rotoframe Brass Sprinkler Head 8 - 14m Coverage 3/4" BSPF thread Ideal presure 0.5-2 bar Heavy droplet size makes sure that wind has a reduced effect on the distribution of water Sturdy brass construction Works well with most existing systems...
£12.41
Add:
PAL41601003
Rubber Washer For Back Nuts Suitable For 1" BSP Threads Rubber Back washer Made in Europe outside diameter40 mm Inside Dimeter of hole 30 mm Thickness 3mm width of rubber 4mm
£0.59
Add:
C41601001
Rubber Washer For Back Nuts Suitable For 1/2" BSP Threads Rubber Back washer Made in Europe outside diameter 35 mm Inside Dimeter of hole 21mm Thickness 2mm width of rubber 8mm
£0.53
Add:
PAL41601005
Rubber Washer For Back Nuts Suitable For 11/2" BSP Threads Rubber Back washer Made in Europe outside diameter 64 mm Inside Dimeter of hole 48mm Thickness 3mm width of rubber 8mm
£0.58
Add:
PAL41601004
Rubber Washer For Back Nuts Suitable For 11/4" BSP Threads Rubber Back washer Made in Europe outside diameter 60 mm Inside Dimeter of hole 44 mm Thickness 3mm width of rubber 8mm
£0.54
Add:
CSAB814203
SABA PVC Cleaner SABA PVC cleaner is used to remove any oli films or other dirt that may effect the glue welds when using PVC fittings and pipe in high pressure environments. Basic Rules when Using SABA PVC Cleaner 1. Saw the tube at...
£9.83
Add:
CSAB814103
SABA PVC Glue S3 SABA PVC glues are widely used in the agricultural and horticultural market for applications that use a wide variety of PVC Systems. SABA glue are used in the sanitary market for drainage and other such applications. ...
£19.40
Add:
C31CM31401
Scotchlock Electrical Connectors The Scotlock waterproof cable connector is an ideal way to connect solenoid valves to mains control units. The connector is a simple squeeze to seal joint Features and Benefits: Scotchlok unique 'u'...
£0.85
Add:
C33850083
ATM Screen Water Filter Up To 8 Cubic Metres Per Hour 80 mesh ( 170 microns) Screen Filter 1" Male BSP Threads The ATM screen filter is ideal for higher flow systems. The filter can easily be removed for cleaning or can be...
£16.77
Add:
PRLCE
£260.40
details Sold Out
Z5740
Single Outlet Drip Nozzle 14 L/H with lead and stake (Pack 10) Use in pots and troughs spaced at 50cm intervals, over large trees and for large specimen plants Can be used with mains water pressure so no need to use pressure reducers...
£17.16
Add:
CZ5246
Netafim PCJ HCNL Dripper With Barb Drip Rate 1.2 Litres Per Hour The PCJ HCNL is a pressure compensated dripper with anti drain valve fitted. The unit is self cleaning/ flushing and offer a very reliable dripper for use in greenhouses,...
£0.59
Add:
CZ5247
Netafim PCJ HCNL Dripper With Barb Drip Rate 2 Litres Per Hour The PCJ HCNL is a pressure compensated dripper with anti drain valve fitted. The unit is self cleaning/ flushing and offer a very reliable dripper for use in greenhouses,...
£0.59
Add:
CZ5248
Netafim PCJ HCNL Dripper With Barb Drip Rate 3 Litres Per Hour The PCJ HCNL is a pressure compensated dripper with anti drain valve fitted. The unit is self cleaning/ flushing and offer a very reliable dripper for use in greenhouses,...
£0.59
details Sold Out
CZ5249
Netafim PCJ HCNL Dripper With Barb Drip Rate 4 Litres Per Hour The PCJ HCNL is a pressure compensated dripper with anti drain valve fitted. The unit is self cleaning/ flushing and offer a very reliable dripper for use in greenhouses,...
£0.59
Add:
VDL250225
Single Union Lever Ball Valve 25 mm Glue - Glue Used to control individual zones in a rigid PVC system. Suitable for above or below ground installation d1 d2 d3 Z1 Z2 C DN PN 25 64 20 47.5 55 87 20 16 ...
£10.92
Add:
C250232
Single Union Lever Ball Valve 32 mm Glue - Glue Used to control individual zones in a rigid PVC system. Suitable for above or below ground installation d1 d2 d3 Z1 Z2 C DN PN 32 73 25 55 65 100 25 16 ...
£13.85
Add:
VDL250240
Single Union Lever Ball Valve 40 mm Glue - Glue Used to control individual zones in a ridgid PVC system. Suitable for above or below ground installation d1 d2 d3 Z1 Z2 C DN PN 40 86 32 61 75 114 32 16 ...
£19.60
Add:
C250250
Single Union Lever Ball Valve 50 mm Glue - Glue Used to control individual zones in a ridgid PVC system. Suitable for above or below ground installation d1 d2 d3 Z1 Z2 C DN PN 50 102 40 74.5 90 138 40 16 ...
£23.67
Add:
C250263
Single Union Lever Ball Valve 63 mm Glue - Glue Used to control individual zones in a rigid PVC system. Suitable for above or below ground installation d1 d2 d3 Z1 Z2 C DN PN 63 124 50 93 103 167 50 16 ...
£37.82
Add:
CVDL250525
Single Union VDL PVC Ball Valve 1" BSPF Female Threaded VDL PVC water fittings are recognised for the quality and precision of manufacture. The fittings are suitable for inside or outside use and offer a reliable distribution method...
£20.51
Add:
sledkit
Metal Sled Riser Kit With Elbow Base NAAN Plastic body Sprinkler Head Metal sled Riser Tee Section Choice of part or full circle Adjustable arc and radius Diffuser pin 1/2" BSPM thread Ouput @ 1.5 bar: 265 l/h - 3.0 bar:380 l/h ...
£56.88
details Sold Out
ECO500V1BLK
Slimline Water Tank 500 Litres Height 101cm X Width 46cm X Length 125cm This is a slim line water storage tank made from industrial grade MDPE so that it can resist UV light plus cold winter conditions. The water tank is formed as 1 part...
£421.99
Add:
TTDigital
T T Smart 10 Digital Pressure Controller Programmable digital pressure controller for dry run protection 1/4" Male thread Supply voltage: 115-220Vac + or - 10% 50/60HZ Maximum ambient temperature: + 40 ºC Maximum liquid...
£207.90
Add:
BER3324AC
Spare coil for Bermad valves
£15.64
Add:
BER3324DC
Spare coil for Bermad valves 24 volts DC
£15.64
Add:
SP906010
Spectrum Sprayer Adjustable from 0 - 90 LPH ( Diameter 2.8 - 4 metres The spectrum adjustable sprayer produces a fine spray suitable for most plants in the greenhouse or for watering beds and borders outside. The spectrum sprayer...
£0.78
Add:
CZ3612
Spinnet Sprinklers 200 LPH 9 Metre Diameter Yellow Head The Spinet head is designed to distribute water very evenly. The sprayer produces a light fine rain making this idea for plants. Bridgless design eliminates drips Operating...
£1.35
details Sold Out
CZ3603
Spinnet Sprinklers 70 LPH 6 Metre Diameter Black Swivel The Spinet head is designed to distribute water very evenly. The sprayer produces a light fine rain making this idea for plants. Bridgless design eliminates drips Operating...
£1.35
details Sold Out
CZ3639
Spinnet Sprinklers 90 LPH 5 Metre Diameter Maroon Swivel The Spinet head is designed to distribute water very evenly. The sprayer produces a light fine rain making this idea for plants. Bridgless design eliminates drips Operating...
£1.35
details Sold Out
ESP50G3220
SportsPro 32mm 10 Bar Water Pipe 100 Metre Roll High quality black water pipe suitable for installation with all garden and landscape watering above and below the soil 2mm wall thickness High pressure rating, 10 bar MDPE pipe 100 Metre...
£112.74
Add:
E50G322050
SportsPro 32mm 10 Bar Water Pipe 50 Metre Roll High quality black water pipe suitable for installation with all garden and landscape watering above and below the soil 2mm wall thickness High pressure rating, 10 bar MDPE pipe 50 Metre...
£63.36
Add:
CMDPE1410
MDPE Sportspro Irrigation Distribution Pipe SportsPro is a Medium Density water pipe suitable for the distribution of water for agricultural or horticultural use. The pipe is 10 bar rated and unlike blue water pipe has a larger internal...
£115.83
Add:
CMDPE1412
MDPE Sportspro Irrigation Distribution Pipe SportsPro is a Medium Density water pipe suitable for the distribution of water for agricultural or horticultural use. The pipe is 10 bar rated and unlike blue water pipe has a larger internal...
£68.20
Add:
MEG0404957
Brass None Return Or Foot Valve 1" BSP Female Thread Gauze Primary Filter Brass Body Spring assisted return Nitrile Butyly Rubber Seal Gauze primary filter 10 bar rated
£12.92
Add:
KEPM
Sprinkler Adapter to M11 Thread (Pack 10) Adapts Vibro-Spin, Mini-Fogger and Mini-Spin Sprinkler heads to M11 threads 6 mm female outlet
£3.19
details Sold Out
C33051511
Sprinkler Riser Or Sprinkler Stand 1/2 inch BSP Male - 1/2inch BSP Female Height 15cm A rigid polypropylene riser that can be used to raise sprayers, misters and other water distribution nozzles above the plant canopy. The risers...
£2.22
Add:
C33063011
Sprinkler Riser Or Sprinkler Stand 1/2 inch BSP Male - 1/2 inch BSP Male Height 30cm A rigid polypropylene riser that can be used to raise sprayers, misters and other water distribution nozzles above the plant canopy. The risers...
£1.61
Add:
C33065021
Sprinkler Riser Or Sprinkler Stand 3/4 inch BSP Male - 1/2 inch BSP MaleHeight 50cm A rigid polypropylene riser that can be used to raise sprayers, misters and other water distribution nozzles above the plant canopy. The...
£2.95
Add:
C33053022
Sprinkler Riser Or Sprinkler Stand 3/4 inch BSP Male - 3/4inch BSP Female Height 30cm A rigid polypropylene riser that can be used to raise sprayers, misters and other water distribution nozzles above the plant canopy. The...
£2.64
details Sold Out
Z3634
SSPE Droppers With Weight 15 cm The simple line drop with weight allows maximum sprinkler operataion as it gives the sprinkler exact operational position at all times regardless of the pipes position. The weight maintains position and...
£0.95
Add:
Z3635
SSPE Droppers With Weight 30 cm The simple line drop with weight allows maximum sprinkler operataion as it gives the sprinkler exact operational position at all times regardless of the pipes position. The weight maintains position and...
£1.06
Add:
Z3636
SSPE Droppers With Weight 45 cm The simple line drop with weight allows maximum sprinkler operataion as it gives the sprinkler exact operational position at all times regardless of the pipes position. The weight maintains position and...
£0.99
Add:
Z3637
SSPE Droppers With Weight 60 cm The simple line drop with weight allows maximum sprinkler operataion as it gives the sprinkler exact operational position at all times regardless of the pipes position. The weight maintains position and...
£1.40
Add:
CZ3658
SSPE Droppers With Weight 90 cm The simple line drop with weight allows maximum sprinkler operataion as it gives the sprinkler exact operational position at all times regardless of the pipes position. The weight maintains position and...
£1.61
Add:
CST272025
Stainless Steel Strainer With Nylon Male 1" BSP Thread Suitable to attach to pipe fittings,, suction hoses and many other fittings including the fitting to check valves as a replacement should the strainer become damaged Made in...
£4.62
Add:
ST272012
Stainless Steel Strainer With Nylon Male 1/2" BSP Thread Suitable to attach to pipe fittings,, suction hoses and many other fittings including the fitting to check valves as a replacement should the strainer become damaged Made in...
£3.04
details Sold Out
CST272040
Stainless Steel Strainer With Nylon Male 11/2" BSP Thread Suitable to attach to pipe fittings,, suction hoses and many other fittings including the fitting to check valves as a replacement should the strainer become damaged Made in...
£6.39
Add:
CST272032
Stainless Steel Strainer With Nylon Male 11/4" BSP Thread Suitable to attach to pipe fittings,, suction hoses and many other fittings including the fitting to check valves as a replacement should the strainer become damaged Made in...
£5.49
Add:
CST272050
Stainless Steel Strainer With Nylon Male 2" BSP Thread Suitable to attach to pipe fittings,, suction hoses and many other fittings including the fitting to check valves as a replacement should the strainer become damaged Made in...
£8.58
Add:
ST272075
Stainless Steel Strainer With Nylon Male 3" BSP Thread Suitable to attach to pipe fittings,, suction hoses and many other fittings including the fitting to check valves as a replacement should the strainer become damaged Made in...
£23.50
Add:
CST272019
Stainless Steel Strainer With Nylon Male 3/4" BSP Thread Suitable to attach to pipe fittings,, suction hoses and many other fittings including the fitting to check valves as a replacement should the strainer become damaged Made in...
£3.83
Add:
ST272009
Stainless Steel Strainer With Nylon Male 3/8" BSP Thread Suitable to attach to pipe fittings,, suction hoses and many other fittings including the fitting to check valves as a replacement should the strainer become damaged Made in...
£2.64
details Sold Out
ST272099
Stainless Steel Strainer With Nylon Male 4" BSP Thread Suitable to attach to pipe fittings,, suction hoses and many other fittings including the fitting to check valves as a replacement should the strainer become damaged Made in...
£25.74
Add:
£986.70
Add:
C380012
Standard 12" Valve Box Suitable for up to 3 valves The standard valve box has a height of 12" Width 10" and a length of 18" Made from heavy duty plastic the box will support most garden traffic. The removable bolt...
£27.77
Add:
MDC52AG2019
4 Wheel Medium Duty Hose Cart A medium duty hose cart suitable for large gardens or nurseries. Both the drum and the frame are made from Powder coated mild steel. The wheels are solid comes with a 3/4" swivel brass elbow ...
£216.23
Add:
GSTCSt
Steel Storage Tank Cover Steel cover for galvanised storage tank. Sectional roof, central pillar, access hatch and integral overflow. Available in diameter sizes between 2.7m - 7.3m NB - carriage surcharge added if not ordered with tank.
£1,346.74
details Sold Out
FBSE16
Stopend 16mm with 3/4" Threaded Cap Simply push in to 16mm supply tube To extend the systems simply remove the threaded cap and screw on a threaded tap connector. Very simple to install
£1.15
Add:
CPAL30660006
Straight Coupling 6mm To Supply Tube Used to connect 6mm micro tube - 16 or 20mm pipe Use with 3mm hole punch
£0.16
Add:
26638
Stuart Turner Automatic Float Switch 110 - 250 Volts Single Pole The stuart Turner Automatic Float Switch is used to automate the filling or discharging of a tank. The unit is adjustable allowing various levels to be maintained and...
£76.01
Add:
SUP1788
Supreme Compression Elbow 32mm - 1/2" BSPF Female thread A very high quality compression water fitting that is suitable for use with drinking water. Technical specification Material Top quality raw materials are used this...
£3.68
Add:
C1727
Supreme Compression Tee 32mm - 1/2" BSPF Female thread A very high quality compression water fitting that is suitable for use with drinking water. Technical specification Material Top quality raw materials are...
£4.50
Add:
TX50620125
Rivulus T-Tape 506 with a 20cm drip spacing outlet run rate 125 litres per hour per 100 metres Made in Italy Length 3048 Metres Drip spacing 20cm Output 125 litres per hour per 100 metres 0.25 Litres per hour drip rate...
£288.98
details Sold Out
TX50620250
Rivulus T-Tape 506 with a 20cm drip spacing outlet run rate 250 litres per hour per 100 metres Made in Italy Length 3048 Metres Drip spacing 20cm Output 250 litres per hour per 100 metres 0.5 Litres per hour drip...
£308.68
Add:
TX50620500S
Rivulus T-Tape 506 with a 20cm drip spacing outlet run rate 500 litres per hour per 100 metres Made in Italy Length 675 Metres Drip spacing 20cm Output 500 litres per hour per 100 metres 1 Litres per hour drip rate...
£125.32
details Sold Out
TX50630170
Rivulus T-Tape 506 with a 30cm drip spacing outlet run rate 175 litres per hour per 100 metres Made in Italy Length 3048 Metres Drip spacing 30cm Output 175 litres per hour per 100 metres 0.5 Litres per hour drip rate...
£288.98
Add:
C51020500
Rivulus T-Tape 510 with a 20cm drip spacing outlet run rate 500 litres per hour per 100 metres Made in Italy Length 1829 Metres Drip spacing 20cm Diameter 16mm Output 500 litres per hour per 100 metres 1 Litres per...
£250.35
details Sold Out
C51020500S
Rivulus T-Tape 510 with a 20cm drip spacing outlet run rate 500 litres per hour per 100 metres Made in Italy Length 375 Metres Drip spacing 20cm Diameter 16mm Output 500 litres per hour per 100 metres 1 Litres...
£103.22
details Sold Out
TT175236
T-Tape 16mm - 1/2" BSP Male Threaded Adaptor Used to connect T-Tape to headers, taps and any other item to a BSP thread Made in Italy Made from Polyethylene 16mm T-Tape - 1/2" BSP male Thread
£0.51
Add:
TT175237
T-Tape 16mm - 3/4" BSP Male Threaded Adaptor Used to connect T-Tape to headers, taps and any other item to a BSP thread Made in Italy Made from Polyethylene 16mm T-Tape - 3/4" BSP male Thread
£0.53
Add:
TT175033
Rivulus T-Tape Coupling The T-Tape Coupling or joiner will join 16mm Rivulus T-tape to Rivulus T-Tape. These are used to join lengths of drip tape together or to repair the drip tape if it becomes damaged in the field. Made in...
£0.56
Add:
TT175055
Rivulus T-Tape Coupling The T-Tape Coupling or joiner will join 16mm Rivulus T-tape to Rivulus T-Tape. These are used to join lengths of drip tape together or to repair the drip tape if it becomes damaged in the field. Made in...
£1.20
Add:
TT179000
Rivulus T-Tape 16mm Drain Valve For Drip Tape Drains the T-Tape after use
£1.68
Add:
TT175833
Rivulus T-Tape Elbow 16mm
£1.26
Add:
C175132
Rivulus T-Tape T-Tape - PE Pipe Adaptor 16mm T-Tape - 16mm LDPE Pipe This converts T-Tape drip tape to Low density polyethylene water pipe . Made in Italy Joins 16mm drip tape to PE Water Pipe Made from Polyethylene Quick and...
£0.42
Add:
TT175134
Rivulus T-Tape T-Tape - PE Pipe Adaptor 16mm T-Tape - 20mm LDPE Pipe This converts T-Tape drip tape to Low density polyethylene water pipe . Made in Italy Joins 16mm drip tape to PE Water Pipe Made from Polyethylene Quick and...
£0.48
details Sold Out
TT175154
Rivulus T-Tape T-Tape - PE Pipe Adaptor 22mm T-Tape - 20mm LDPE Pipe This converts T-Tape drip tape to Low density polyethylene water pipe . Made in Italy Joins 22mm drip tape to PE Water Pipe Made from Polyethylene Quick and...
£0.72
Add:
TT175330
T Tape Take Off With Integral Grommet
£0.46
Add:
C175733
T-Tape Tee 16mm Drip Tape
£1.39
Add:
C178500
T-Tape Inline Valve 16mm T-Tape
£1.57
Add:
ECO500V3BLK
Slimline Water Tank 500 Litres Height 125cm X Width 46cm X Length 101cm This is a slim line water storage tank made from industrial grade MDPE so that it can resist UV light plus cold winter conditions. The water tank is formed as 1 part...
£464.33
Add:
CPAL31601003
Tank Connector 1 Inch BSP Thread This is a polypropylene tank connector with a 1 inch bsp thread. one of the back nuts is fixed leaving a 20 mm length of thread. The other can be removed and then tightened up once the tank connector has been...
£6.57
Add:
CPAL31601001
Tank Connector 1/2 Inch BSP Thread This is a polypropylene tank connector with a 1/2 inch bsp thread. one of the back nuts is fixed leaving a 20 mm length of thread. The other can be removed and then tightened up once the...
£4.62
Add:
CPAL31601004
Tank Connector 11/2 Inch BSP Thread This is a polypropylene tank connector with a 11/2 inch bsp thread. one of the back nuts is fixed leaving a 20 mm length of thread. The other can be removed and then tightened up once the tank connector has been...
£9.57
Add:
CPAL31601006
Tank Connector 2 Inch BSP Thread This is a polypropylene tank connector with a 2 inch bsp thread. one of the back nuts is fixed leaving a 20 mm length of thread on one side and 30mm on the other . The other can be removed and then tightened up once...
£11.40
Add:
CPAL31601002
Tank Connector 3/4 Inch BSP Thread This is a polypropylene tank connector with a 3/4 inch bsp thread. one of the back nuts is fixed leaving a 20 mm length of thread. The other can be removed and then tightened up once the tank...
£5.13
Add:
C32130162
Barbed 16mm Fitting - 3/4" Female threaded swivel or Tap connector The swivel connector can be used for many applications including attaching your irrigation system to an outside tap or water time. The fittings is self sealing as it...
£0.83
Add:
3213/13
Fits most outdoor bibtaps or water timers Self sealing washer Needs heat to fit to 13mm inside diametter pipe , hot water or paint stripper Lightly heat end of Black pipe or Permadrip and push to fit
£1.01
Add:
CZ2447C
This is a high grade heavy duty push fit fitting suitable for 20 mm external diameter LDPE PIpe . Tavlit fittings are more expensive than the standard fitting however they are made to a much higher standard and so are more resistant to damage...
£1.42
Add:
C215033
Tavlit Swivel Manifold 3 Outlets Features: Speed up installation and simplify maintenance. Swivel fitted with O-Ring as standard - no teflon required for sealing. Made with Reliability, Long life and durability in mind....
£7.49
Add:
C215034
Tavlit Swivel Manifold 4 Outlets Features: Speed up installation and simplify maintenance. Swivel fitted with O-Ring as standard - no teflon required for sealing. Made with Reliability, Long life and durability in mind....
£11.26
Add:
C215035
Tavlit Swivel Manifold 5 Outlets Features: Speed up installation and simplify maintenance. Swivel fitted with O-Ring as standard - no teflon required for sealing. Made with Reliability, Long life and durability in mind....
£15.00
Add:
C210533
Tavlit Manifold Nipple 1"x 1" BSP Thread With O Ring Seal Swivel Nipple with "O" Ring - Specially designed for electric valve assembly. Short Thread So that a seal is made with the O Ring against the valve or other flat...
£1.31
Add:
C210532
Tavlit Manifold Nipple 1"x 3/4" BSP Thread With O Ring Seal Swivel Nipple with "O" Ring - Specially designed for electric valve assembly. Short Thread So that a seal is made with the O Ring against the valve or other flat...
£1.31
Add:
CZ2428A
Tavlit Manifold Nipple 3/4"x 3/4" BSP Thread With O Ring Seal Swivel Nipple with "O" Ring - Specially designed for electric valve assembly. Short Thread So that a seal is made with the O Ring against the valve or other...
£1.84
Add:
TAV1918163
Tavlit Nut Lock 16mm X 1" Female BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the...
£1.64
Add:
TAV225599
Tavlit Nut Lock 16mm x 1 inch Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe...
£1.13
Add:
TAV1915161
Tavlit Nut Lock 16mm x 1/2 inch Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE...
£0.87
Add:
TAV1918162
Tavlit Nut Lock 16mm X 3/4" Female BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes...
£1.64
Add:
TAV1915162
Tavlit Nut Lock 16mm x 3/4 inch Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE...
£0.87
Add:
TAV1918201
Tavlit Nut Lock 20mm x 1/2" Female BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes...
£1.64
Add:
TAV1915554
Tavlit Nut Lock 20mm x 1/2 inch Male Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe...
£1.13
Add:
TAV1918202
Tavlit Nut Lock 20mm x 3/4" Female BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes...
£1.64
Add:
TAV1915202
Tavlit Nut Lock Fitting 20mm x 3/4" Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this...
£0.87
Add:
TAV225664
Tavlit Nut Lock 20mm - 1" Female BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the...
£2.01
Add:
TAV1918253
Tavlit Nut Lock 25mm x 1 inch Female BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE...
£2.19
Add:
TAV1915253
Tavlit Nut Lock 25mm x 1 inch Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe...
£1.57
Add:
TAV191825334
Tavlit Nut Lock 25mm x 3/4 inch Female BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE...
£2.65
Add:
TAV191525334
Tavlit Nut Lock 25mm x 3/4 inch Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE...
£1.98
Add:
PAL3251/0324
Tavlit Nut Lock 32mm x 11/4 inch Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE...
£2.48
Add:
PAL32510323
Tavlit Nut Lock 32mm x 1 inch Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe...
£2.55
Add:
PAL32510322
Tavlit Nut Lock 32mm x 3/4 inch Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE...
£2.61
Add:
TAV191025
Tavlit Nut Lock Connector 25mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that...
£2.55
Add:
PAL32613232
Tavlit Nut Lock Connector 32mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that...
£4.05
Add:
TAV191016
Tavlit Nut Lock 16mm Coupling Nut Lock fittings for easy and water tight connection, no need for tape. Combine the advantage of barbed and clamping couplings. The nut lock has a standard B.S.P threaded fitting. Max . working...
£1.49
Add:
C191020
Tavlit Nut Lock 20mm Straight Joint Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe...
£1.69
Add:
TAV192516
Tavlit Nut Lock Elbow 16mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that...
£2.02
details Sold Out
TAV1928162
Tavlit Nut Lock Elbow 16mm x 3/4" inch Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes...
£1.54
Add:
TAV192520
Tavlit Nut Lock Elbow 20mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that barbs...
£2.27
Add:
TAV1928202F
Tavlit Nut Lock 20mm Elbow - 3/4" Female BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this...
£1.88
Add:
TAV1928202
Tavlit Nut Lock 20mm Elbow - 3/4" Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this...
£1.54
Add:
TAV192525
Tavlit Nut Lock Elbow 25mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that barbs...
£3.06
Add:
TAV2955645
Tavlit Nut Lock Elbow 25mm x 1" inch Male BSP Thread Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes...
£2.48
Add:
PAL3300/3232
Tavlit Nut Lock Elbow 32mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that barbs...
£6.56
Add:
TAV193016
Tavlit Nut Lock End Line 16mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that...
£0.87
Add:
TAV193020
Tavlit Nut Lock 20mm Stop End Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against...
£0.87
Add:
TAV193025
Tavlit Nut Lock 25mm Stop End Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against...
£1.59
Add:
PAL3271/0032
Tavlit Nut Lock 32mm Stop End Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against...
£2.73
Add:
TAV1922516
Tavlit Nut Lock Reducer 25mm - 16mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against...
£4.12
Add:
TAV1922520
Tavlit Nut Lock Reducer 25mm - 20mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against...
£4.12
Add:
TAV2016RED
Tavlit Nut Lock Reducer 20mm x 16mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against...
£1.85
Add:
TAV195020
Tavlit Nut Lock Tap 20mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that barbs...
£4.49
Add:
TAV192016
Tavlit Nut Lock Tee 16mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that barbs...
£2.67
Add:
TAV192020
Tavlit Nut Lock Tee 20mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that barbs...
£3.03
Add:
TAV192025
Tavlit Nut Lock Tee 25mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that barbs...
£4.15
Add:
PAL32913232
Tavlit Nut Lock Tee 32mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe against that barbs...
£8.58
Add:
TAV195016
Tavlit Nut Lock Valve 16mm x 16mm Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this Squeezes the LDPE pipe...
£4.49
Add:
TNT1634BF
Tavlit Nutlock Tee 16 mm 3/4" Female Threaded Branch Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this...
£3.02
Add:
TNT2034BF
Tavlit Nutlock Tee 20 mm 3/4" Female Threaded Branch Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this...
£3.20
Add:
TNT2034B
Tavlit Nutlock Tee 20 mm 3/4" Male Threaded Branch Tavlit Nut Lock fittings are quick and simple to use. They incorporate an internal pipe that LDPE pipe can easily be pushed over. The nut is then tighten and this...
£3.20
Add:
Z2519
Tavlit Push Fit 3 Way Connector 16mm - 3/4" BSP This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe. Tavlit fittings are more expensive...
£2.22
Add:
Z2526
Tavlit Push Fit 3 way Connector 16mm - 3/4" This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe. Tavlit fittings are more expensive than the...
£4.26
Add:
Z2518
Tavlit Push Fit 3 way Connector 20mm - 3/4" This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe. Tavlit fittings are more expensive than the standard fitting however they are made to a...
£2.12
Add:
Z2528
Tavlit Push Fit 3 way Connector 20mm - 3/4" This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe. Tavlit fittings are more expensive than the standard fitting however they are made to a...
£4.12
Add:
Z2531
Tavlit Push Fit 4 way Connector 16mm - 3/4" This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe. Tavlit fittings are more expensive than the...
£4.70
Add:
Z2533
Tavlit Push Fit 4 way Connector 20mm - 3/4" Female Thread This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe. Tavlit fittings are more expensive than the standard fitting however they...
£4.12
Add:
Z2536
Tavlit Push Fit 6 way Connector 16mm - 3/4" This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe. Tavlit fittings are more expensive than...
£4.70
Add:
Z2538
Tavlit Push Fit 6 way Connector 20mm - 3/4" Female Thread T This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe. Tavlit fittings are more expensive than the standard fitting however...
£4.97
Add:
Z2511
Tavlit Push Fit Y Connector 16mm - 3/4" This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe. Tavlit fittings are more expensive than the...
£2.26
Add:
Z2513
Tavlit Push Fit Y Connector 20mm - 3/4" This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe. Tavlit fittings are more expensive than the standard fitting however they are made to...
£1.98
Add:
CZ5298C
TechFlow Junior Inline Dripper 2 LPH Drip Rate The Techflow Junior dripper is a very high quality pressure compensated anti syphon self cleaning dripper. This is an ideal dripper for greenhouses, landscape and other installations that...
£0.59
Add:
CZ5298
TechFlow Junior Inline Dripper 8 LPH Drip Rate The Techflow Junior dripper is a very high quality pressure compensated anti syphon self cleaning dripper. This is an ideal dripper for greenhouses, landscape and other installations that...
£0.59
Add:
CZ5298B
TechFlow Junior Inline Dripper 3 LPH Drip Rate The Techflow Junior dripper is a very high quality pressure compensated anti syphon self cleaning dripper. This is an ideal dripper for greenhouses, landscape and other installations that...
£0.59
Add:
CZ5298A
TechFlow Junior Inline Dripper 4 LPH Drip Rate The Techflow Junior dripper is a very high quality pressure compensated anti syphon self cleaning dripper. This is an ideal dripper for greenhouses, landscape and other installations that...
£0.59
Add:
C31121620
Pipe Pegs For 16 Or 20 mm Pipes Used to stake down pipes in the garden making installation a lot easier . Can be used on both 16 and 20 mm low or high water pressure pipe including PVC water pipe if needed. We would suggest that you will...
£0.45
Add:
Z2476
Tee 16mm 3/4" Threaded Branch Barbed plastic pipe fittings Pressure tested to 90 psi Needs heat to fit, hot water or paint stripper Lightly heat end of Black pipe or Permadrip and push to fit
£0.90
Add:
TEF41214
Tefen Female Bush 1/2" Male X 1/4" Female Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up...
£3.01
Add:
TEF41238
Tefen Female Bush 1/2" Male X 3/8" Female Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up...
£3.07
Add:
TEF41418
Tefen Female Bush 1/4" Male X 1/8" Female Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty...
£1.60
Add:
TEF43412
Tefen Female Bush 3/4" Male X 1/2" Female Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up...
£4.07
Add:
TEF43414
Tefen Female Bush 3/4" Male X 1/4" Female Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up...
£3.84
Add:
TEF43438
Tefen Female Bush 3/4" Male X 3/8" Female Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up...
£3.97
Add:
TEF43814
Tefen Female Bush 3/8" Male X 1/4" Female Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up...
£1.90
Add:
TEF1312
Tefen Cap 1/2" BSP Thread Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£1.37
details Sold Out
TEF1314
Tefen Cap 1/4" BSP Thread Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£1.04
Add:
TEF1318
Tefen Cap 1/8" BSP Thread Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£0.97
details Sold Out
TEF1334
Tefen Cap 3/4" BSP Thread Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£1.90
Add:
TEF1338
Tefen Cap 3/8" BSP Thread Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£1.17
Add:
TEF2010
Tefen Connector 10mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.42
Add:
TEF2012
Tefen Connector 12mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.07
Add:
TEF2016
Tefen Connector 16mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.14
Add:
TEF2019
Tefen Connector 19mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.14
Add:
TEF204
Tefen Connector 4 mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£0.87
Add:
TEF205
Tefen Connector 5mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£0.92
Add:
TEF206
Tefen Connector 6mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£0.95
Add:
TEF208
Tefen Connector 8mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.17
Add:
TEF512
Tefen Female Coupling 1/2" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£3.01
Add:
TEF514
Tefen Female Coupling 1/4" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£1.70
Add:
TEF518
Tefen Female Coupling Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Tefen...
£1.65
Add:
TEF538
Tefen Female Coupling 3/8" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£1.97
Add:
22TPIP-2
Tefen HDPE Pipe Outside Diameter 1/4" Suitable For 4mm Tefen Fittings Tefen HDPE pipe is rated to 16 bar max operating pressure ( 235 psi) This High Density Polyethylene tubing is lightweight and has excellent impact resistance. Its high...
£0.96
Add:
22TPIP06
Tefen HDPE Pipe Outside Diameter 6mm Suitable For 4mm Tefen Fittings Tefen HDPE pipe is rated to 16 bar max operating pressure ( 235 psi) This High Density Polyethylene tubing is lightweight and has excellent impact resistance. Its high...
£0.96
details
22TPIP08
Tefen HDPE Pipe Outside Diameter 8mm Suitable For 6mm Tefen Fittings Sold per metre Tefen HDPE pipe is rated to 16 bar max operating pressure ( 235 psi) This High Density Polyethylene tubing is lightweight and has excellent impact...
£0.96
Add:
TEFTEEMTB
Tefen Tee With Male Threaded BSP Branch Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
details
TEF1810
Tefen Hose Elbow 10mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.14
Add:
TEF1812
Tefen Hose Elbow 12mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.44
Add:
TEF1816
Tefen Hose Elbow 16mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.44
Add:
TEF1819
Tefen Hose Elbow 19mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.60
Add:
TEF184
Tefen Hose Elbow 4mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£0.87
Add:
TEF185
Tefen Hose Elbow 5mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£0.97
Add:
TEF186
Tefen Hose Elbow 6mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.04
Add:
TEF188
Tefen Hose Elbow 8mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.37
Add:
22TBG
Tefen Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£2.07
details
TEF151012
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.17
Add:
C151014
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.07
Add:
TEF151034
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.37
Add:
C151038
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.17
Add:
22TBM124
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.40
Add:
C151214
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.17
Add:
CTEF151234
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.38
Add:
C151238
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.17
Add:
TEF151612
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.37
Add:
TEF151634
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.44
Add:
C151912
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.44
Add:
TEF151934
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.57
Add:
C15414
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£0.99
Add:
C15418
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£0.85
Add:
C15514
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£0.89
Add:
C15518
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£0.89
Add:
C15612
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.07
Add:
C15614
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.04
Add:
TEF15638
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.04
Add:
C15618
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£0.99
Add:
C15812
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.07
Add:
C15814
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.07
Add:
C15818
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.04
Add:
TEF15838
Male Hose Connector Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made in...
£1.07
Add:
TEF161012
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.44
Add:
TEF161014
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.37
Add:
TEF161038
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.37
Add:
TEF161212
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.57
Add:
TEF161214
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.44
Add:
TEF161234
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.57
Add:
TEF161238
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.44
Add:
TEF161612
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.65
Add:
TEF161634
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.70
Add:
TEF161912
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.70
Add:
TEF161934
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.77
Add:
TEF16418
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.04
Add:
TEF16514
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.07
Add:
TEF16518
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.04
Add:
TEF16614
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.07
Add:
TEF16618
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.04
Add:
TEF16812
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.37
Add:
TEF16814
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.20
Add:
TEF16818
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.07
Add:
TEF16838
Male Hose Elbow Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade. Made...
£1.20
Add:
9TM01-08
Mix-Rite Water Powered Injector TF 1 Injector Flow Rate 0.0002-1 Cubic Metre Per Hour Pressure 0.2 - 8 Bar 3/4" BSP Male threads Min dosage rate 0.02 litres per hour Maximum Dose rate per hour 10 Litres Per...
£386.64
details Sold Out
9TF02-20
Mix-Rite Water Powered Injector TF 25.5 Injector Flow Rate 20-2500 litres per hour Pressure 0.2 - 8 Bar Dodage rate 0.3 - 2% 3/4" BSP Male threads Min dosage rate 0.6 litres per hour Maximum Dose rate per...
£375.43
Add:
9TF03-09
Mix-Rite Water Powered Injector TF 3.5 Injector Flow Rate 0.001-2500 litres per hour Pressure 0.2 - 8 Bar Dosage rate 0.1 - 0.9% 3/4" BSP Male threads Min dosage rate 0.5 litres per hour Maximum Dose rate per...
£401.55
Add:
9TF03-20
Mix-Rite Water Powered Injector TF 3.5 Injector Flow Rate 50-3500 litres per hour Pressure 0.2 - 8 Bar Dosage rate 0.3 - 2% 3/4" BSP Male threads Min dosage rate 0.5 litres per hour Maximum Dose rate per hour...
£401.55
details Sold Out
9TF03-50
Mix-Rite Water Powered Injector TF 3.5 Injector Flow Rate 50-3500 litres per hour Pressure 0.2 - 8 Bar Dosage rate 0.5 - 5% 3/4" BSP Male threads Min dosage rate 0.5 litres per hour Maximum Dose rate per hour...
£401.55
details Sold Out
9TF05-20
Mix-Rite Water Powered Injector TF 5 Injector Flow Rate 20-5000 litres per hour Pressure 0.2 - 8 Bar Dosage rate 0.2 - 2% 1" BSP Male threads Min dosage rate 0.4 litres per hour Maximum Dose rate per hour 100...
£779.56
Add:
9TF05-50
Mix-Rite Water Powered Injector TF 5 Injector Flow Rate 20-5000 litres per hour Pressure 0.2 - 8 Bar Dosage rate 1 - 5% 1" BSP Male threads Min dosage rate 0.4 litres per hour Maximum Dose rate per hour 100...
£996.45
Add:
TEF21212
Tefen Nipple 1/2" X 1/2" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£1.90
Add:
TEF21414
Tefen Nipple 1/4" X 1/4" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£1.70
Add:
TEF21818
Tefen Nipple 1/8" X 1/8" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£1.30
Add:
TEF23838
Tefen Nipple 3/8" X 3/8" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100...
£1.90
Add:
TEF1212
Tefen Plug 1/2" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.07
Add:
TEF1214
Tefen Plug 1/4" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£0.97
Add:
TEF1218
Tefen Plug 1/8" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£0.87
Add:
TEF1238
Tefen Plug 3/8" Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.07
Add:
TEF19108
Tefen Reducer 10mm - 8mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.14
Add:
TEF191210
Tefen Reducer 12mm - 10mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.14
Add:
TEF19128
Tefen Reducer 12mm - 8mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.40
Add:
TEF191612
Tefen Reducer 16mm - 12mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.17
Add:
TEF191916
Tefen Reducer 19mm - 16mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.34
Add:
TEF1964
Tefen Reducer 6mm - 4mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.00
Add:
TEF1965
Tefen Reducer 6mm - 5mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.00
Add:
TEF1985
Tefen Reducer 8mm - 5mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.00
Add:
TEF1986
Tefen Reducer 8mm - 6mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.00
Add:
TEF11214
Tefen Reducing Nipple 1/2" - 1/4" BSP Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to...
£1.94
Add:
TEF11238
Tefen Reducing Nipple 1/2" - 3/8" BSP Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to...
£2.00
Add:
TEF11418
Tefen Reducing Nipple 1/4" - 1/8" BSP Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to...
£1.07
Add:
TEF13814
Tefen Reducing Nipple 3/8" - 1/4" BSP Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to...
£1.77
Add:
TEF61412
Tefen Reducing Socket 1/4" - 1/2" BSPF Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to...
£2.87
Add:
TEF61438
Tefen Reducing Socket 1/4" - 3/8" BSPF Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to...
£1.90
Add:
TEF61418
Tefen Reducing Socket 1/8" - 1/4" BSPF Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to...
£1.37
Add:
TEF61838
Tefen Reducing Socket 1/8" - 3/8" BSPF Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to...
£1.90
Add:
TEF63812
Tefen Reducing Socket 3/8" - 1/2" BSPF Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to...
£3.01
Add:
PN141012
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.44
Add:
PN141034
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.60
Add:
TEF141038
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.00
Add:
PN141212
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.67
Add:
PN141234
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.67
Add:
PN141612
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£3.34
Add:
PN151634
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.77
Add:
PN151934
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.81
Add:
TEF14414
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£1.77
Add:
TEF14418
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£1.65
Add:
TEF14514
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£1.37
Add:
TEF14518
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£1.37
Add:
TEF14538
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£1.65
Add:
PN14612
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.27
Add:
TEF14614
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£1.77
Add:
TEF14638
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.00
Add:
PN14812
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.44
Add:
TEF14814
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£1.90
Add:
TEF14838
Tefen Swivel Nut Female Hose Tail Tefen Nylon 66 hose fittings are made to the highest standards. Tefen fittings are suitable for use with oil, Derv, Petrol, Hydraulic fluid and are suitable for food use. They can operate at pressures of...
£2.27
Add:
TEF2310
Tefen Tee 10mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.37
Add:
TEF2312
Tefen Tee 12mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.44
Add:
TEF2316
Tefen Tee 16mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.70
Add:
TEF2319
Tefen Tee 19mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.77
Add:
TEF234
Tefen Tee 4mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£0.97
Add:
TEF235
Tefen Tee 5mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.04
Add:
TEF236
Tefen Tee 6mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.07
Add:
TEF238
Tefen Tee 8mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.17
Add:
22TBY1010
Tefen Y Connector 10mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.94
Add:
22TBT1717
Tefen Y Connector 17mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£2.24
Add:
TEF214
Tefen Y Connector 4mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.32
Add:
TEF216
Tefen Y Connector 6mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.47
Add:
TEF218
Tefen Y Connector 8mm Tefen fittings are made from Nylon 66. These blue fittings are suitable for food use and pressure rated to 14 bar. The fitting is stable at temperatures from minus twenty centigrade up to 100 centigrade.
£1.54
Add:
C33550202
Thread Converter 3/4" Male - 3/4" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with thread...
£1.31
Add:
C33550301
Thread Reducing Converter 1" Male - 1/2" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with...
£1.00
Add:
C33550306
Thread Reducing Converter 1" Male - 2" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with...
£3.79
Add:
C33550302
Thread Reducing Converter 1" Male - 3/4" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with...
£1.00
Add:
C33550201
Thread Reducing Converter 1/2" Male - 3/4" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar...
£1.00
Add:
C33550506
Thread Reducing Converter 11/2" Male - 2" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with...
£4.57
Add:
C33550405
Thread Reducing Converter 11/4" Male - 11/2" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar...
£3.48
Add:
C33550605
Thread Reducing Converter 2" Male - 11/2" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with...
£4.57
Add:
C33550604
Thread Reducing Converter 2" Male - 11/4" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with...
£3.72
Add:
C33550203
Thread Reducing Converter 3/4" Male - 1" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with...
£1.04
Add:
C33550201
Thread Reducing Converter 3/4" Male - 1/2" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar...
£1.00
Add:
PAL11603005
Back Nut 1 1/2"" BSP The back not is made from Polyamide which is strong and rigid. This will allow for a secure non stretching grip to the male thread. The material is UV stabilised so suitable for indoor or...
£1.41
Add:
PAL11603004
Back Nut 11/4" BSP These are strong durable plastic fittings that are made from Polyamide. The material will give plenty of support and will allow for a strong non flexible grip to the thread. The material is suitable for in...
£1.21
Add:
C11603003
Back Nut 1" BSP Made In The EU Toughened Rigid Material For more information on pipe thread and how to measure them please click here
£0.91
Add:
C11603001
Back Nut 1/2" BSP Made In The EU Toughened Rigid Material For more information on pipe thread and how to measure them please click here
£1.05
Add:
PAL11603006
Back Nut 2" BSP This is a threaded back nut with a 2" British standard thread. It is made from Polyamide and this is a very rigid plastic that will give plenty of support with bending. The material is UV stabilised so...
£4.39
Add:
C11603002
Back Nut 3/4" BSP Made In The EU Toughened Rigid Material For more information on pipe thread and how to measure them please click here
£1.05
Add:
C002318
Threaded Bush 1" Male - 1/2" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a thread...
£0.73
Add:
C002320
Threaded Bush 1" Male - 3/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a thread...
£0.73
Add:
C002250
Threaded Bush 1/2" Male - 1/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£1.36
Add:
C002360
Threaded Bush 11/2" Male - 1" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a thread...
£1.33
Add:
E002365
Threaded Bush 11/2" Male - 11/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£1.44
Add:
C002350
Threaded Bush 11/2" Male - 3/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£1.21
Add:
C002350
Threaded Bush 11/2" Male - 3/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£1.44
Add:
C002335
Threaded Bush 11/4" Male - 1" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a thread...
£1.33
Add:
C002333
Threaded Bush 11/4" Male - 3/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£1.15
Add:
C002390
Threaded Bush 2" Male - 1" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a thread...
£2.33
Add:
C002410
Threaded Bush 2" Male - 11/2" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a thread...
£2.46
Add:
PAL002395
Threaded Bush 2" Male - 11/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a thread...
£2.90
Add:
C002500
Threaded Bush 3" Male - 2" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a thread...
£16.29
Add:
C002310
Threaded Bush 3/4" Male - 1/2" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£0.43
Add:
PAL44100303
Threaded Elbow 1" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.70
Add:
PAL33080303
Threaded Elbow 1" Male BSP - 1" Female Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.48
Add:
C33100303
Threaded Elbow 1" Male BSP - 1" Male Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£0.96
Add:
PAL44100101
Threaded Elbow 1/2" Female Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.11
Add:
PAL33080101
Threaded Elbow 1/2" Male BSP - 1/2" Female Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.53
Add:
PAL33100101
Threaded Elbow 1/2" Male BSP - 1/2" Male Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£0.79
Add:
PAL33080102
Threaded Elbow 1/2" Male BSP - 3/4" Female Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.53
Add:
PAL44100505
Threaded Elbow 11/2" Female Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£6.37
Add:
PAL44100404
Threaded Elbow 11/4" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£2.97
Add:
PAL44100606
Threaded Elbow 2" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£7.19
Add:
C441000808
Threaded Elbow 3" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£25.95
Add:
PAL44100202
Threaded Elbow 3/4" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.58
Add:
PAL33080202
Threaded Elbow 3/4" Male BSP - 3/4" Female Bsp This is a threaded elbow suitable for irrigation use. The elbow is made from polypropylene using the highest grade raw pellets Made In The EU 10 Bar Rated How to...
£1.37
Add:
C33100202
Threaded Elbow 3/4" Male BSP - 3/4" Male Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£0.79
Add:
PAL44110333
Equal Tee Female Thread 1" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£2.18
Add:
C33110333
Equal Tee Male Thread 1" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£1.12
Add:
CPAL44110111
Equal Tee Female Thread 1/2" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£1.58
Add:
PAL44110555
Equal Tee Female Thread 11/2" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£6.90
Add:
PAL44110444
Equal Tee Female Thread 11/4" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£3.94
Add:
PAL44110666
Equal Tee Female Thread 2" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£7.87
Add:
PAL44110222
Equal Tee Female Thread 3/4" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£1.76
Add:
C33110222
Equal Tee Male Thread 3/4" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£0.79
Add:
C33010303
Threaded Nipple 1" BSP - 1" BSP The high quality plastic threaded nipple is used to join the same threads together or can be used to convert a female thread to a male thread. The fittings should be used with PTFE tape or...
£0.63
Add:
C33010101
Threaded Nipple 1/2" BSP - 1/2" BSP The high quality plastic threaded nipple is used to join the same threads together or can be used to convert a female thread to a male thread. The fittings should be used with PTFE tape or...
£0.26
Add:
C33010505
Threaded Nipple 11/2" BSP - 11/2" BSP The high quality plastic threaded nipple is used to join the same threads together or can be used to convert a female thread to a male thread. The fittings should be used with PTFE tape or...
£2.04
Add:
C33010404
Threaded Nipple 11/4" BSP - 11/4" BSP The high quality plastic threaded nipple is used to join the same threads together or can be used to convert a female thread to a male thread. The fittings should be used with PTFE tape or...
£0.97
Add:
C33010606
Threaded Nipple 2" BSP - 2" BSP The high quality plastic threaded nipple is used to join the same threads together or can be used to convert a female thread to a male thread. The fittings should be used with PTFE tape or...
£2.41
Add:
C33010202
Threaded Nipple 3/4" BSP - 3/4" BSP The high quality plastic threaded nipple is used to join the same threads together or can be used to convert a female thread to a male thread. The fittings should be used with PTFE tape or...
£0.30
Add:
C33310003
Threaded Plug 1" Male thread Made In The EU Seal the threads with PTFE For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.60
Add:
C33310001
Threaded Plug 1/2" Male thread Made In The EU Seal the threads with PTFE For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.35
Add:
PAL33310004
Threaded Plug 11/4" Male thread Made In The EU Seal the threads with PTFE For more information relating the the British Standard Pipe Thread and how to measure them please click here
£1.23
Add:
PAL33310002
Threaded Plug 3/4" Male thread Made In The EU Seal the threads with PTFE For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.35
Add:
CVDL808533
Threaded PVC Socket 1 inch Female Thread 10 Bar Rated PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and...
£4.10
Add:
CVDL808555
Threaded PVC Socket 11/2 inch Female Thread 10 Bar Rated PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and...
£6.43
Add:
C802011
Threaded PVC Socket Glue X Female Thread 10 Bar Rated 20mm x 1/2" Female Thread VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£0.89
Add:
C802022
Threaded PVC Socket Glue X Female Thread 10 Bar Rated 25mm x 3/4" Female Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£1.73
Add:
CVDL808522
Threaded PVC Socket 3/4 inch Female Thread 10 Bar Rated PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and...
£2.90
Add:
C802033
Threaded PVC Socket Glue X Female Thread 10 Bar Rated 32mm x 1" Female Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£2.98
Add:
C802044
Threaded PVC Socket Glue X Female Thread 10 Bar Rated 40 mm x 11/4" Female Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£3.62
Add:
C802043
Threaded PVC Socket Glue X Female Thread 10 Bar Rated 40mm x 1" Female Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£3.62
Add:
C802055
Threaded PVC Socket Glue X Female Thread 10 Bar Rated 50mm x 11/2" Female Thread VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£4.19
Add:
C802065
Threaded PVC Socket Glue X Female Thread 10 Bar Rated 63mm x 11/2" Female Thread VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£6.33
Add:
C802066
Threaded PVC Socket Glue X Female Thread 10 Bar Rated 63mm x 2" Female Thread VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£6.32
Add:
VDL802077
Threaded PVC Socket Glue X Female Thread 10 Bar Rated 75mm x 2 1/2"" Female Thread VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£16.18
Add:
C33510303
Threaded Socket 1" Female Bsp - 1" Female BSP Made In The EU 10 Bar Rated Seal threads with PTFE UV Stabilized For more information relating to threads and how to measure a British Standard Pipe Thread please click...
£1.05
Add:
C33510101
Threaded Socket 1/2" Female BSP - 1/2" Female BSP Made In The EU 10 Bar Rated Seal threads with PTFE UV Stabilized For more information relating to threads and how to measure a British Standard Pipe Thread please click...
£0.83
Add:
C33510505
Threaded Socket 11/2" Female Bsp - 11/2" Female BSP Made In The EU 10 Bar Rated Seal threads with PTFE UV Stabilized For more information relating to threads and how to measure a British Standard Pipe Thread please click...
£3.67
Add:
C33510404
Threaded Socket 11/4" Female Bsp - 11/4" Female BSP Made In The EU 10 Bar Rated Seal threads with PTFE UV Stabilized For more information relating to threads and how to measure a British Standard Pipe Thread please click...
£3.67
Add:
C33510606
Threaded Socket 2" Female Bsp - 2" Female BSP Made In The EU 10 Bar Rated Seal threads with PTFE UV Stabilized For more information relating to threads and how to measure a British Standard Pipe Thread please click...
£3.67
Add:
C002150
Threaded Socket 3" Female Bsp - 3" Female BSP Made In The EU 10 Bar Rated Seal threads with PTFE UV Stabilized For more information relating to threads and how to measure a British Standard Pipe Thread please click...
£24.76
Add:
C33510202
Threaded Socket 3/4" Female Bsp - 3/4" Female BSP Made In The EU 10 Bar Rated Seal threads with PTFE UV Stabilized For more information relating to threads and how to measure a British Standard Pipe Thread please click...
£0.83
Add:
C31590202
Threaded Valve 3/4 Inch Male - Female Valve made in the Eu this is a precise valve that can be used to regulate or turn off water flow to individual zones. The tap has a 3/4" Male thread at one end and a 3/4" Female thread on...
£2.09
Add:
C33120333
Threaded Tee 1" Male X 1" Female Threaded Branch X1" Male Made in the Eu this threaded Tee is 6 bar rated and suitable for above ground installation or close to surface installation. Can be used with a combination of...
£2.87
Add:
C33120222
Threaded Tee 3/4" Male X 3/4" Female Threaded Branch X 3/4" Male Made in the Eu this threaded Tee is 6 bar rated and suitable for above ground installation or close to surface installation. Can be used with a combination...
£1.92
Add:
MEG0401478
Brass Lever Ball Valve Three Way 1" BSP Female Thread 3-way ball valve L-bore brass 1" female thread 16bar DN8 side connection Connection: female thread Material: brass Surface treatment: nickel...
£66.43
Add:
MEG0401476
Brass Lever Ball Valve Three Way 1/2" BSP Female Thread 3-way ball valve L-bore brass 1/2" female thread 16bar DN8 side connection Connection: female thread Material: brass Surface treatment:...
£30.19
Add:
MEG0401479
Brass Lever Ball Valve Three Way 11/4" BSP Female Thread 3-way ball valve L-bore brass 11/4" female thread 16bar DN8 side connection Connection: female thread Material: brass Surface treatment:...
£102.25
Add:
MEG0401474
Brass Lever Ball Valve Three Way 1/4" BSP Female Thread 3-way ball valve L-bore brass 1/4" female thread 16bar DN8 side connection Connection: female thread Material: brass Surface treatment:...
£28.98
Add:
MEG0401480
Brass Lever Ball Valve Three Way 11/2" BSP Female Thread 3-way ball valve L-bore brass 11/2" female thread 16bar DN8 side connection Connection: female thread Material: brass Surface treatment:...
£145.05
Add:
MEG0401481
Brass Lever Ball Valve Three Way 2" BSP Female Thread 3-way ball valve L-bore brass 2" female thread 16bar DN8 side connection Connection: female thread Material: brass Surface treatment: nickel...
£216.46
Add:
MEG0401477
Brass Lever Ball Valve Three Way 3/4" BSP Female Thread 3-way ball valve L-bore brass 3/4" female thread 16bar DN8 side connection Connection: female thread Material: brass Surface treatment:...
£40.41
Add:
MEG0401475
Brass Lever Ball Valve Three Way 3/8" BSP Female Thread 3-way ball valve L-bore brass 3/8" female thread 16bar DN8 side connection Connection: female thread Material: brass Surface treatment:...
£28.98
details Sold Out
TRI0501013
Tricoflex Industrial Hose Pipe 12.5mm (1/2") x 100m Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and...
£192.49
Add:
TRI0501010
Tricoflex Industrial Hose Pipe 12.5mm (1/2") x 25m Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and...
£44.10
details Sold Out
TRI0501012
Tricoflex Industrial Hose Pipe 12.5mm (1/2") x 50m Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and...
£88.00
Add:
TRI0501019
Tricoflex Industrial Hose Pipe 19mm (3/4") x 100m Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and abrasion...
£305.80
details Sold Out
C0501017
Tricoflex Industrial Hose Pipe 19mm (3/4") x 25m Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and abrasion...
£63.79
details Sold Out
TRI0501018
Tricoflex Industrial Hose Pipe 19mm (3/4") x 50m Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and abrasion...
£163.90
details Sold Out
TRI0501026
Tricoflex Industrial Hose Pipe 25mm (1") x 100m Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and abrasion...
£486.95
details Sold Out
TRI0501024
Tricoflex Industrial Hose Pipe 25mm (1") x 25m Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and abrasion...
£121.73
details Sold Out
TRI0501025
Tricoflex Industrial Hose Pipe 25mm (1") 50 Metres 20 Year Warranty Outer layer is UV and abrasion resistant Yellow for easy visability Knitted reinforcement combines pressure resistance with excellent handling characteristics Multi-layer...
£243.47
Add:
TRI0501024perm
Tricoflex Industrial Hose Pipe 25mm (1") x per metre Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and...
£6.96
Add:
TRI0501033
Tricoflex Industrial Hose Pipe 30mm (11/4") 100 Metres 20 Year Warranty Outer layer is UV and abrasion resistant Yellow for easy visability Knitted reinforcement combines pressure resistance with excellent handling characteristics Multi-layer...
£559.90
details Sold Out
TRI0501031
Tricoflex Industrial Hose Pipe 30mm (11/4") 25 Metres 20 Year Warranty Outer layer is UV and abrasion resistant Yellow for easy visability Knitted reinforcement combines pressure resistance with excellent handling characteristics Multi-layer...
£164.99
details Sold Out
TRI0501032
Tricoflex Industrial Hose Pipe 30mm (11/4") 50 Metres 20 Year Warranty Outer layer is UV and abrasion resistant Yellow for easy visability Knitted reinforcement combines pressure resistance with excellent handling characteristics Multi-layer...
£317.90
details Sold Out
TRI55321
Tricoflex Industrial Hose Pipe 30mm (11/4") Sold by the metre 20 Year Warranty Outer layer is UV and abrasion resistant Yellow for easy visability Knitted reinforcement combines pressure resistance with excellent handling...
£11.57
Add:
TRI050139
Tricoflex Industrial Hose Pipe 40mm 25 Metres 20 Year Warranty Outer layer is UV and abrasion resistant Yellow for easy visability Knitted reinforcement combines pressure resistance with excellent handling characteristics Multi-layer...
£241.99
details Sold Out
TRI050140
Tricoflex Industrial Hose Pipe 40mm 50 Metres 20 Year Warranty Outer layer is UV and abrasion resistant Yellow for easy visability Knitted reinforcement combines pressure resistance with excellent handling characteristics Multi-layer...
£483.62
details Sold Out
TRI050150
Tricoflex Industrial Hose Pipe 50mm 25 Metres 20 Year Warranty Outer layer is UV and abrasion resistant Yellow for easy visability Knitted reinforcement combines pressure resistance with excellent handling characteristics Multi-layer...
£394.90
details Sold Out
TRI050151
Tricoflex Industrial Hose Pipe 50mm 50 Metres 20 Year Warranty Outer layer is UV and abrasion resistant Yellow for easy visability Knitted reinforcement combines pressure resistance with excellent handling characteristics Multi-layer...
£768.90
details Sold Out
TRI551599
Tricoflex Industrial Hose Pipe 15mm (5/8") x 100m Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and abrasion...
£202.92
Add:
TRI551550
Tricoflex Industrial Hose Pipe 15mm (5/8") x 50m Tricoflex is probably the most used industrial hose. The hose is very tough, very durable and stays flexible even in cold conditions. 20 Year Warranty Outer layer is UV and abrasion...
£104.28
details Sold Out
SGMDS56M25-30
Tricoflex Spirabel GMDS Medium Duty Suction/Discharge Tube 25mm Inside Diameter 30 Metre Roll Made In France PVC Spiral PVC Tube Suitable for Discharge and Suction Good Flexibility at low temperatures Smooth...
£90.17
Add:
SGMDS56M32-30
Tricoflex Spirabel GMDS Medium Duty Suction/Discharge Tube 32mm Inside Diameter 30 Metre Roll Made In France PVC Spiral PVC Tube Suitable for Discharge and Suction Good Flexibility at low temperatures Smooth...
£101.34
Add:
SGMDS56M40-30
Tricoflex Spirabel GMDS Medium Duty Suction/Discharge Tube 40mm Inside Diameter 30 Metre Roll Made In France PVC Spiral PVC Tube Suitable for Discharge and Suction Good Flexibility at low temperatures Smooth...
£134.01
Add:
SGMDS56M50-30
Tricoflex Spirabel GMDS Medium Duty Suction/Discharge Tube 50mm Inside Diameter 30 Metre Roll Made In France PVC Spiral PVC Tube Suitable for Discharge and Suction Good Flexibility at low temperatures Smooth...
£190.67
Add:
SGMDS56M63-30
Tricoflex Spirabel GMDS Medium Duty Suction/Discharge Tube 63mm Inside Diameter 30 Metre Roll Made In France PVC Spiral PVC Tube Suitable for Discharge and Suction Good Flexibility at low temperatures Smooth...
£247.63
Add:
SGMDS56M75-30
Tricoflex Spirabel GMDS Medium Duty Suction/Discharge Tube 75mm Inside Diameter 30 Metre Roll Made In France PVC Spiral PVC Tube Suitable for Discharge and Suction Good Flexibility at low temperatures Smooth...
£291.18
Add:
SLD56L25-50
Tricoflex Spirabel LD Suction Hose 25mm Inside Diameter 50 Metre Roll Made in France 25mm Inside Diameter Wall Thickness 2.4 mm Burst Pressure 15 Bar Working Pressure 5 Bar PVC Reinforcing Spiral PVC...
£124.24
Add:
CSLD56L38-30
Tricoflex Spirabel LD Suction Hose 38mm Inside Diameter 30 Metre Roll Made in France 38mm Inside Diameter Wall Thickness 2.8 mm Burst Pressure 15 Bar Working Pressure 5 Bar PVC Reinforcing Spiral PVC...
£119.21
details Sold Out
SLD56L50-30
Tricoflex Spirabel LD Suction Hose 50mm Inside Diameter 30 Metre Roll Made in France 50mm Inside Diameter Wall Thickness 3.3 mm Burst Pressure 12 Bar Working Pressure 4 Bar PVC Reinforcing Spiral PVC...
£193.46
Add:
SLD56L63-30
Tricoflex Spirabel LD Suction Hose 63mm Inside Diameter 50 Metre Roll Made in France 63mm Inside Diameter Wall Thickness 3.5 mm Burst Pressure 12 Bar Working Pressure 4 Bar PVC Reinforcing Spiral PVC...
£479.25
Add:
SLD56L75-25
Tricoflex Spirabel LD Suction Hose 75mm Inside Diameter 25 Metre Roll Made in France 75mm Inside Diameter Wall Thickness 3.8 mm Burst Pressure 12 Bar Working Pressure 4 Bar PVC Reinforcing Spiral PVC...
£274.53
Add:
TSA56U12-30
Tricoflex Spire Acier Suction Hose Made In France High quality soft clear PVC Galvanized steel reinforcong spiral UV Resistant Highly resistant to crushing and vacum Smooth inner wall reduces frictions and makes...
£97.71
Add:
TSA56U20-30
Tricoflex Spire Acier Suction Hose Made In France High quality soft clear PVC Galvanized steel reinforcong spiral UV Resistant Highly resistant to crushing and vacum Smooth inner wall reduces frictions and makes...
£162.76
Add:
TSA56U25-30
Tricoflex Spire Acier Suction Hose Made In France High quality soft clear PVC Galvanized steel reinforcong spiral UV Resistant Highly resistant to crushing and vacum Smooth inner wall reduces frictions and makes...
£233.68
Add:
TSA56U38-30
Tricoflex Spire Acier Suction Hose Made In France High quality soft clear PVC Galvanized steel reinforcong spiral UV Resistant Highly resistant to crushing and vacum Smooth inner wall reduces frictions and makes...
£417.38
Add:
TCF54S10-30
Tricoflex TCF Reinforced Clear PVC Hose 10mm Inside Diameter 30 metres in length Tricoflex TCF is only available in 30 metre rolls. Inside diameter 10mm Outside diameter 15mm wall thickness 2.5mm Burst pressure 40 bar ...
£42.46
Add:
TCF54S12-30
Tricoflex TCF Reinforced Clear PVC Hose 12 mm Inside Diameter 30 metres in length Tricoflex TCF is only available in 30 metre rolls. Inside diameter 12mm Outside diameter 18mm wall thickness 2.75mm Burst pressure 40 bar ...
£49.50
Add:
TCF54S16-30
Tricoflex TCF Reinforced Clear PVC Hose 16mm Inside Diameter 30 metres in length Tricoflex TCF is only available in 30 metre rolls. Inside diameter 16mm Outside diameter 22mm wall thickness 3mm Burst pressure 40 bar ...
£74.80
Add:
TCF54S19-30
Tricoflex TCF Reinforced Clear PVC Hose 19mm Inside Diameter 30 metres in length Tricoflex TCF is only available in 30 metre rolls. Inside diameter 19mm Outside diameter 26mm wall thickness 3.5mm Burst pressure 40 bar ...
£84.17
Add:
TCF54S25-30
Tricoflex TCF Reinforced Clear PVC Hose 25mm Inside Diameter 30 metres in length Tricoflex TCF is only available in 30 metre rolls. Inside diameter 25mm Outside diameter 33mm wall thickness 4mm Burst pressure 40 bar ...
£125.40
Add:
TCF54S32-30
Tricoflex TCF Reinforced Clear PVC Hose 32mm Inside Diameter 30 metres in length Tricoflex TCF is only available in 30 metre rolls. Inside diameter 32mm Outside diameter 41mm wall thickness 4.5mm Burst pressure 36 bar ...
£169.40
Add:
TCF54S39-30
Tricoflex TCF Reinforced Clear PVC Hose 38mm Inside Diameter 30 metres in length Tricoflex TCF is only available in 30 metre rolls. Inside diameter 38mm Outside diameter 47mm wall thickness 4.5mm Burst pressure 33 bar ...
£264.00
Add:
TCF54SO6-30
Tricoflex TCF Reinforced Clear PVC Hose 6mm Inside Diameter 30 metres in length Tricoflex TCF is only available in 30 metre rolls. Inside diameter 6mm Outside diameter 11mm wall thickness 2.35mm Burst pressure 40 bar ...
£25.89
Add:
TCF54SO8-30
Tricoflex TCF Reinforced Clear PVC Hose 8mm Inside Diameter 30 metres in length Tricoflex TCF is only available in 30 metre rolls. Inside diameter 8mm Outside diameter 12mm wall thickness 2.5mm Burst pressure 40 bar ...
£43.56
Add:
TUB54U15-25
Tricoflex TUBCLAIR AL Clear PVC Pipe 15mm Inside diameter 25 metre Roll Made in France 15mm Inside diameter 19mm Outside Diameter Wall Thickness 2 mm Temperature plus 60 centigrade - Minus 15 Centigrade Suitable...
£37.46
Add:
TUB54U30-25
Tricoflex TUBCLAIR AL Clear PVC Pipe 30mm Inside diameter 25 metre Roll Made in France 30mm Inside diameter 37mm Outside Diameter Wall Thickness 3.5 mm Temperature plus 60 centigrade - Minus 15 Centigrade Suitable...
£138.20
Add:
TUB54U38-25
Tricoflex TUBCLAIR AL Clear PVC Pipe 38mm Inside diameter 25 metre Roll Made in France 38mm Inside diameter 48mm Outside Diameter Wall Thickness 5 mm Temperature plus 60 centigrade - Minus 15 Centigrade Suitable...
£206.13
Add:
TRI684025
Tripod Riser 1" Male thread The portable metal Tripod is probably the most popular portable sprinkler stand as the height can be adjusted making it suitable for beds, borders and lawns. Portable riser 1" BSPM top and bottom...
£42.21
Add:
TRI684019
Tripod Riser 3/4" Male thread The portable metal Tripod is probably the most popular portable sprinkler stand as the height can be adjusted making it suitable for beds, borders and lawns. Portable riser 3/4" BSPM top and...
£28.74
Add:
tripodkit
Tripod Riser Watering Kit Kit contains 1 x Tripod Riser (extendable 60 cms -100 cms) 1 x Apollon Sprinkler Head ( 18 -21 mts diameter @ 1.5-3 bar) 1 x 3/4" female Geka Type Fitting 1 x 3/4" Click Fit Hose Connector 1 x 1/2" to...
£44.19
details
ECO10000UND
10,000 Litre Underground Water Storage Tank About the 10,000 litre water tank Perfect for commercial and agricultural usage, this massive 10,000 litre water tank is ideal for non potable water storage. On top of the tank are four...
£2,612.15
details Sold Out
UNI702601
£1.49
Add:
C700533
63mm Repair Coupling Quick and easy to use compression water pipe fitting for above and below ground installation Fits all water pipes with an outside diameter 63mm Pressure tested to 12 bar Easy Installation The 63 mm repair...
£9.33
Add:
E71V2532
Unidelta Compression Stop Cock 32mm 16 Bar Rated Screw Down Stop Top Down service Suitable for all MDPE PE and LDPE Pipe Made in Italy Suitable for indoor or Outdoor instalation above or below ground Not frost...
£25.08
Add:
C712660
63 mm End Cap Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made in Italy WRAS...
£9.76
Add:
C700566
63mm Repair Coupling Quick and easy to use compression water pipe fitting for above and below ground installation Fits all water pipes with an outside diameter 63mm Pressure tested to 12 bar Easy Installation The 63 mm repair...
£14.29
Add:
C71U2011
Unidelta Compression Ball Valve 20mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure ...
£15.17
Add:
C71U2022
Unidelta Compression Ball Valve 25mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure ...
£13.94
Add:
C71U2033
Unidelta Compression Ball Valve 32mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure ...
£16.09
Add:
C71U2055
Unidelta Compression Ball Valve 50mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure ...
£32.55
Add:
E702634
Unidelta Compression Connector 32mm x 11/4" Male BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable...
£2.72
Add:
C703655
Unidelta Compression Connector 50 mm - 1/2" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic...
£6.52
Add:
703602
Unidelta 16 mm Connector 16 mm - 3/4" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic...
£1.50
Add:
C703613
Unidelta 20 mm Connector 20 mm - 1" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to...
£2.46
Add:
CI703612
Unidelta 20 mm Connector 20 mm - 3/4" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£1.98
Add:
C703621
Unidelta Compression Connector 25mm - 1/2" Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£2.30
Add:
C702623
Unidelta Compression Connector 25mm - 1" BSP Male thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£2.11
Add:
C703623
Unidelta Connector 25mm - 1" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£2.32
Add:
C702621
Unidelta Compression Connector 25mm - 1/2" BSP male thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal...
£2.11
Add:
C703622
Unidelta Compression Connector 25mm - 3/4" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal...
£2.33
Add:
C702622
Unidelta Compression Connector 25mm - 3/4" BSP male thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal...
£2.09
Add:
C703634
Unidelta 32mm - 11/4" BSP Female threaded connector Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16...
£2.97
Add:
C702633
Unidelta Compression Connector 32mm - 1" Male thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to...
£2.90
Add:
C703633
Unidelta Compression Connector 32mm - 1" BSPF Female thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal...
£2.91
Add:
C702632
Unidelta Connector 32mm - 3/4" Male BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£2.64
Add:
C703632
Unidelta Connector 32mm - 3/4" BSPF Female thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16...
£2.92
Add:
UNI702654
Unidelta Connector 50mm - 11/4" BSP Male Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£5.37
Add:
C702653
Unidelta Connector 50mm - 1" BSP Male thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£7.26
Add:
C703654
Unidelta 50mm - 11/4" BSPF Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£6.52
Add:
C703656
Unidelta 50mm - 2" BSPF Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure...
£6.12
Add:
C701611
Unidelta Connector 20mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made in...
£2.92
Add:
C701622
Unidelta Straight Connector 25mm Compression Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£3.38
Add:
C707012
Unidelta Compression Elbow 20mm - 3/4" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£2.36
Add:
C706623
Unidelta Compression Elbow 25mm - 1" BSP Male Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to...
£2.60
Add:
C707021
Unidelta 25 mm Elbow - 1/2" BSP Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£2.95
Add:
C706622
Unidelta Compression Elbow 25mm x 3/4" Male BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal...
£2.56
Add:
C705633
Unidelta Compression Elbow 32 mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure ...
£4.30
Add:
C705611
Unidelta Elbow 20mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made in Italy...
£2.94
Add:
C706611
Unidelta Compression Elbow 20 mm - 1/2" male BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£2.11
Add:
C706612
Unidelta Elbow 20mm - 3/4" Male BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£2.11
Add:
C705622
Unidelta Elbow 25mm Compression Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure ...
£3.43
Add:
UNI707023
Unidelta Compression Elbow 25mm - 1" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to...
£2.97
Add:
C707022
Unidelta Compression Elbow 25mm - 3/4" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£2.65
Add:
C707033
Unidelta Compression Elbow 32mm - 1" BSPF Female thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£3.48
Add:
C706633
Unidelta Compression Elbow 32mm - 1" BSP Male thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal...
£3.29
Add:
C707032
Unidelta 32mm - 3/4" BSPF Female thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£3.12
Add:
C706632
Unidelta 32mm Elbow with 3/4" Male BSP thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£2.72
Add:
C705655
Unidelta Elbow 50mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made in Italy...
£10.48
Add:
C705666
63mm Compression Elbow 63mm Made in Italy WRAS Approved Elbow 63mm Strong secure grip ring Seal formed via O ring rather than rubber flap The seal in Unidelta fittings is formed by an O ring rather than a rubber flap and this...
£14.10
Add:
C712610
Unidelta 20mm End Cap Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made in Italy...
£2.11
details Sold Out
C712620
Unidelta End Cap 25mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made in...
£2.36
Add:
C712630
Unidelta End Cap 32 mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made in...
£2.61
Add:
C701610
Unidelta Reducing Coupler 20 mm -16mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure...
£3.29
Add:
C701621
Unidelta Reducing Coupler 25 mm -20mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure...
£3.08
Add:
C704821
Unidelta Reducing Compression Tee 25mm - 20mm Branch Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£4.79
Add:
C704832
Unidelta Compression Reducing Tee 32mm x 32mm Branch 25mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to...
£6.16
Add:
C704832
Unidelta Compression Reducing Tee 32mm x 32mm Branch 25mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to...
£6.16
Add:
C701655
Unidelta Straight Connector 50mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made in...
£9.72
Add:
C704611
Unidelta Compression Tee 20 mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made...
£4.10
Add:
C704622
Unidelta Tee 25mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made in Italy...
£5.15
Add:
C714621
Unidelta Compression Tee 25mm - 1/2" BSPF Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£4.18
Add:
C714622
Unidelta Compression Tee 25mm - 3/4" Female BSP threaded Branch Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic...
£4.18
Add:
C704633
Unidelta Compression Tee 32mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made...
£6.35
Add:
C704655
Unidelta Compression Tee 50mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure Made in...
£14.19
Add:
CI713622
Supreme Compression Tee 25mm 3/4" BSP MaleThreaded Branch A very high quality compression water fitting that is suitable for use with drinking water. Technical specification Material Top quality raw materials are used...
£3.75
Add:
C714611
Unidelta Compression Tee 20mm 1/2"Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16...
£2.72
Add:
CI74612
Unidelta Compression Tee 20mm 3/4"Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£3.29
Add:
C714623
Unidelta Compression Tee 25mm - 1" Female BSP Threaded Branch Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic...
£4.66
Add:
C714656
Unidelta Compression Tee 50mm - 2" BSP Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to...
£14.95
Add:
UNI714655
Unidelta Compression Tee 50mm - 11/2" BSP Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£11.05
Add:
C714654
Unidelta Compression Tee 50mm - 11/4" BSP Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£11.95
Add:
C714666
Supreme Compresion Tee 63 mm x 63 mm x 2" Female thread Made in Italy WRAS Approved Tee 63mm with 2" Female BSP thread branch For more information on thread sizes please click here Strong secure grip ring Seal formed via...
£19.05
Add:
E714665
Unidelta Compression Tee 63mm - 11/2" BSP Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£16.99
Add:
C702655
Compression Connector 50mm - 11/2" BSP Male Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16...
£6.44
Add:
C702656
Unidelta Connector 50 mm - 2" Male thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£6.44
Add:
C702613
Unidelta Connector 20 mm - 1" BSP Male Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£1.75
Add:
C702612
Unidelta Connector 20 mm - 3/4" BSP Male Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£1.69
Add:
C703611
Unidelta Connector 20mm - 1/2" BSPF Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16...
£1.83
Add:
C702665
Unidelta Compression Connector 63mm - 11/2" Male BSP Thread Made in Italy WRAS Approved Connetor 63mm with11/2" Male BSP thread For more information on thread sizes please click here Strong secure grip ring Seal...
£9.14
details Sold Out
UNI703665
Unidelta Compression Connector 63mm - 11/2" BSP Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic...
£5.42
Add:
C703666
Unidelta Compression Fitting 63mm - 2" BSP Female Thread Made in Italy WRAS Approved Connetor 63mm with 2" Female BSP thread For more information on thread sizes please click here Strong secure grip ring Seal formed...
£9.14
Add:
UNI702666
Unidelta Compression Straight Connector 63mm - 2" BSP Male thread Made in Italy WRAS Approved Connetor 63mm with 2" Male BSP thread For more information on thread sizes please click here Strong secure grip ring Seal...
£9.14
Add:
UNI703698
Unidelta Compression Fitting 90mm - 3" BSP Female Thread Made in Italy WRAS Approved Connetor 90mm with 3" Female BSP thread For more information on thread sizes please click here Strong secure grip ring Seal formed...
£23.03
Add:
C702699
Unidelta Compression Connector 90mm - 4" Male BSP Thread Made in Italy WRAS Approved Connetor 90mm with 4" Male BSP thread For more information on thread sizes please click here Strong secure grip ring Seal formed...
£19.36
details Sold Out
UNI707055
Unidelta Compression Elbow 50mm - 11/2" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£7.60
Add:
C707054
Unidelta Compression Elbow 50mm - 11/4" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£9.15
Add:
C707056
Unidelta Compression Elbow 50mm - 2" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to...
£9.15
Add:
C707065
Unidelta Compression Elbow 63mm - 11/2" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£12.47
Add:
C707066
Unidelta Compression Elbow 63mm - 2" Female BSP Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to...
£12.47
Add:
C706655
Unidelta Elbow 50mm - 1.5 Inch BSP Male Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£7.19
Add:
C706065
Unidelta Elbow 63mm - 11/2 Inch BSP Male Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£9.98
Add:
C706666
Unidelta Elbow 63mm - 2 Inch BSP Male Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£9.98
Add:
C701632
Unidelta MDPE Compression Reducer 32mm - 25mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure...
£4.04
Add:
C701632
Unidelta MDPE Compression Reducer 32mm - 25mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure...
£4.04
Add:
C701653
Unidelta MDPE Compression Reducer 50mm - 32mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure...
£8.99
Add:
UNI701665
Unidelta MDPE Compression Reducer 63mm - 50mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure...
£13.42
Add:
C714633
Unidelta MDPE Compression Tee 32mm 1" BSP Female threaded branch Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic...
£5.91
Add:
C714632
Unidelta MDPE Compression Tee 32mm 3/4" BSP Female threaded branch Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable...
£5.45
Add:
UNI713632
Unidelta MDPE Compression Tee 32mm 3/4" BSP Male threaded branch Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic...
£4.60
Add:
C701633
Unidelta Straight Connector 32mm Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar pressure ...
£4.37
Add:
C701666
Unidelta Compression Striaght Connector 63mm Made in Italy WRAS Approved Connetor 63mm Strong secure grip ring Seal formed via O ring rather than rubber flap The seal in Unidelta fittings is formed by an O ring rather than a...
£12.44
Add:
C704666
Unidelta Compression Tee 63mm Made in Italy WRAS Approved Tee 63mm Strong secure grip ring Seal formed via O ring rather than rubber flap The seal in Unidelta fittings is formed by an O ring rather than a rubber flap and this...
£22.42
Add:
C709822
Unidelta Coupling 25mm Pipe - 15/22mm Copper or plastic The Transition coupling is used to change from 25mm MDPE, PE or LDPE pipe to either copper or plastic water pipe wit a 15 or 22mm outsde diameter Made in Italy WRAS...
£11.72
Add:
C718011
Unidelta Wall Plate 20mm - 1/2" BSP Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up to 16 bar...
£1.26
Add:
C718022
Unidelta Wall Plate 25mm - 3/4" Female BSPF Thread Can be used to connect outside taps etc to 25mm outside diameter LDPE or MDPE water pipe. The fitting is WRAS approved so suitable for drinking water and is 16 bar rated. The plate...
£7.25
Add:
C707011
Unidelta Compression Elbow 20mm - 1/2" BSP Female Thread Unidelta compression fittings can be used with LDPE, MDPE, PE40, PE80 water pipes. This relates to the outside diameter of the pipe and will form a strong durable hydraulic seal up...
£2.43
Add:
C811155
Pipe Clamp 50mm For securing 50mm Secures PVC, LDPE and MDPE pipe Use round head 8/10 screws With a 5mm screw hole
£1.48
Add:
CVDL811329
VDL Adaptor From 25mm Or 32mm PVC Pipe To 16mm MDPE Or LDPE Pipe This is used to convert PVC pipe to Pe pipe. The PVC end will take 25mm pvc straight in to the fitting or it can be used with 32mm PVC but you will require a 32mm Socket...
£1.50
Add:
CVDL811331
VDL Adaptor From 25mm Or 32mm PVC Pipe To 20mm MDPE Or LDPE Pipe This is used to convert PVC pipe to Pe pipe. The PVC end will take 25mm pvc straight in to the fitting or it can be used with 32mm PVC but you will require a 32mm Socket...
£1.50
Add:
C811000
VDL Pipe Clip For 16mm Outside Diameter Pipe The VDL pipe clamp is a very strong pipe clip with tough jaws that grip the pipe once it is inserted. Indeed the grip is so positive that once fitted it is very hard to remove the pipe once...
£0.55
Add:
C811011
VDL Pipe Clip For 20mm Outside Diameter Pipe The VDL pipe clamp is a very strong pipe clip with tough jaws that grip the pipe once it is inserted. Indeed the grip is so positive that once fitted it is very hard to remove the pipe once...
£0.65
Add:
C811033
VDL Pipe Clamp 32mm For securing 32mm supply pipe to walls or fences Use round head 8/10 screws With a 5mm screw hole
£0.95
Add:
C811166
VDL Pipe Clamp 63mm A very secure fitting for attaching any 63mm outside diameter pipe Made in Holland by VDL
£2.04
Add:
C810850
Pipe Clip Blocks 50 mm Used with the 50 mm pipe clamps. Used to space pipe bracket away from wall. Can be used in multiples for extra distance
£0.81
Add:
VDL806222
PVC Equal Crosses 16 Bar Pressure 25mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£4.43
Add:
C811532
VDL Elbow 32mm PVC - 25mm MDPE or LDPE Pipe
£2.91
details Sold Out
VDL805177
VDL 45º Elbow 16 Bar Rated 75 mm PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in...
£7.23
details Sold Out
VDL805199
VDL 45º Elbow 16 Bar Rated 90 mm PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in...
£11.12
Add:
CVDL806612
VDL Hose Adapter - PVC Pipe This is used to convert 12mm outside diamter PVC pipe to a 3/4" Flexible pipe. The 20mm end fits inside any form of connector, in other words the end has thw same diameter as a 50mm pvc pipe so any...
£1.47
Add:
CVDL806623
VDL Hose Adapter - PVC Pipe This is used to convert 12mm outside diamter PVC pipe to a 1" Flexible pipe. The 25mm end fits inside any form of connector, in other words the end has thw same diameter as a 50mm pvc pipe so any...
£1.86
Add:
CVDL806634
VDL Hose Adapter - PVC Pipe This is used to convert 32mm outside diamter PVC pipe to a 11/4" Flexible pipe. The 32mm end fits inside any form of connector, in other words the end has thw same diameter as a 50mm pvc pipe so...
£2.16
details Sold Out
CVDL806645
VDL Hose Adapter - PVC Pipe This is used to convert 40mm outside diamter PVC pipe to a 11/2" Flexible pipe. The 50mm end fits inside any form of connector, in other words the end has thw same diameter as a 50mm pvc pipe so...
£2.99
Add:
C250220
Single Union Lever Ball Valve 20 mm Glue - Glue 16 bar rated Used to control individual zones in a rigid PVC system. Suitable for above or below ground installation d1 d2 d3 Z1 Z2 C DN PN 20 59 15 43.5 50 77 15 16...
£9.56
Add:
1583a
£391.47
details Sold Out
CPAL30120070
Vibro Spin Nozzle 70 lph 3 meter spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy site. ...
£0.32
Add:
CPAL30120105
Vibro Spin Nozzle 105 lph 4 metre spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy...
£0.32
Add:
CPAL30120160
Vibro Spin Nozzle 160 lph 5 metre spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy...
£0.32
Add:
CPAL30120090
Vibro Spin Nozzle 90 lph 3.5 metre spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy...
£0.32
Add:
CPAL3012060
Vibro Spin Nozzle 60 lph 2.5 metre spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy site. ...
£0.32
Add:
CPAL30120120
Vibro Spin Nozzle 120 lph 4.5 metre spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy...
£0.32
Add:
CARA360050
ARAD 11/4" Water Meter Threaded male tail pieces to allow easy removal Thread size 2" Must be installed horizontally Metal body pressure tested to 16 bar Max flow 15000 litres per hour Measurement dial 1L - 10,000 Cubic metres ...
£136.12
Add:
ECO350V2
Rectangular Water Tank Height 52 cm Width 75cm Length 99cm This is a very tough and durable water tank made from MDPE. The tank is rugged and suitable for industrial applications as well as domestic installations. The tank is ideal as a...
£280.86
Add:
ECO350V1
Rectangular Water Tank Height 75 cm Width 52cm Length 99cm This is a very tough and durable water tank made from MDPE. The tank is rugged and suitable for industrial applications as well as domestic installations. The tank is ideal as a...
£280.86
Add:
ECO350V3
Rectangular Water Tank Height 99 cm Width 75cm Length 52cm This is a very tough and durable water tank made from MDPE. The tank is rugged and suitable for industrial applications as well as domestic installations. The tank is ideal as a...
£317.55
Add:
D710BLK
710 Litre D Water Tank Height 105cm X Width 90cm X Depth 90 cm Made from industrial strength MDPE (Medium Density Polyethylene) the D710 Litres is a long lasting durable Water Tank. Designed to sit flush against a wall, allowing a downpipe to be...
£450.22
Add:
ECOWB500V2BLK
500 Litre WB Water Tank Height 63cm X Width 93 cm X Length 100cm This is our ultimate slimline water tank. Made from a strong plastic called polyethylene that is weather resistant and frost resistant. To make using our slimline water tank even...
£395.16
Add:
ECOWB500V1BLK
500 Litre WB Water Tank Height 93cm X Width 63 cm X Length 100cm This is our ultimate slimline water tank. Made from a strong plastic called polyethylene that is weather resistant and frost resistant. To make using our slimline water tank even...
£395.16
Add:
C814725
Weld On Wet R Dry UPVC Cement 250 grams 240 ml Medium bodied, extremely fast setting, low VOC PVC cement for all classes and schedules with interference fit through 6″ (160 mm) diameter, Schedule 80 through 4″ (110 mm) diameter....
£25.07
details Sold Out
CHT813016
Galvanised Wire Support Hooks 16cm Used with High Tensile wire and used to hang pipe above ground
£0.26
Add:
£216.00
Add:
CBMGHMD15GB
Garden Hose Medium Duty Garden Hose 15 meters In Length This medium duty british made garden hose Britsh made Value for money
£7.71
Add: