Barbed Push Fit Tee 32mm Branch 1" Male Thread

Barbed Push Fit Tee 32mm x32mm x 1" Male BSP Thread

The barbed male Tee to 32mm push fit barbs are used exclusively with LDPE pipe.  This is a thinner walled pipe than the MDPE which is used underground and should be used with compression fittings. 

As with all Barbed fittings quality of the fitting and quality of the pipe are key to the successful long term integrity of the distribution system. 

The barbed fitting are made in the EU using UV stabilized plastic and large sharp barbs.  The LDPE pipe that we stock is made in Holland and matches the quality and precision of the barbed fitting.  Once the barbed fitting is inserted correctly the fitting is rated to a maximum of 6 bar unlike domestic quality fittings that in some cases are only rated to 2.1 bar

• precision made
• large sharp barbs for a secure fit
• Made in the EU
• UV stabilized

How to measure a thread size

All (or most) thread sizes used in water fittings in the home and garden are measured in BSP (British Standard Pipe Thread). BSP can sometimes be referred to as BSPF or the Whitworth Pipe Thread. Pipe thread can be parallel or tapered depending on the use that the fitting is going to be used for.

This standard is used in the UK and it ensures that items that are used in the gas, water and Hydraulics industry are compatible. For example when you connect your washing machine to the mains water the adapter will use a standard BSP ¾” thread. This standard is used in many parts of the World outside of the United States.

Each thread can be measured using the very simple table below and there is no need to look at the number of threads per inch

To summarize the simplest way to identify which thread you have is to measure the outside diameter (male thread) or the inside diameter for a female thread