Hunter Swinging Arm For Pop-Ups 6 Inch 1/2" - 1/2" bsp

Hunter Swinging Arm For Pop-Ups 6" x 1/2" x 1/2" BSP 

The Hunter Swinging arm Joint is the easy way to install sprinklers at their proper height and position in mere seconds.

Hunter swinging arms offer a simple way to install a pop up in to any threaded fitting with a 3/4" or 1/2" thread.  The arm has two universal type joints at both ends so that the pop up can be postioned at any angle or height within the reach of the arm. 

An added bonus is that the popup can be very easily repaired or replaced as it is a simple job of digging round the pop up and then pulling the pop up out of the ground on its swinging arm.  The unit can now be repaired or replaced above the soil level keeping dirt  out of the pop up.  When the work is complete simply push the pop up down on the swing arm and recover with earth and turf.  If the ground sinks slightly leaving the top of the sprayer abover the ground then it is a simple job of pushing on the top of the pop up until it is at the correct level.

Click here for more information on Hunter swinging arm joints