Your cart is empty.

Tap Connector 3/4" Female Thread - 16mm Barbed


Barbed 16mm Fitting - 3/4" Female threaded swivel or Tap connector 

The swivel connector can be used for many applications including attaching your irrigation system to an outside tap or water time.  The fittings is self sealing as it has a washer inside so that once threaded on to the tap, timer or pipe fitting it seals so that it can be removed and re attached easily.  Various attachments can be used with the standard 3/4" thread as listed below 

  • Simple push fit connector 
  • 3/4" female British Standard Pipe Thread 
  • most outdoor bibtaps have a 3/4" male thread 
  • Can be used to join pipes together with a 16mm outside diameter or a 13 mm inside diameter 
  • UV stabilised plastic 
  • Once fitted the joint is rated to 6 bar 
  • Made in Greece 

 

Fitting 

These more industrial type push fit fittings have a much larger and sharper barb than the more retail fittings.  Because of this more effort is required in order to fit these to the pipe.  The end of the pipe that needs joining should be heated using either very hot water or some form of blow torch.  If you do use a blow torch then the end of the pipe should be positioned in the flame for 2 seconds if the pipe is black and 1 second if it is brown.  The flame should be directed down the centre of of the pipe rather than on 1 side.  Now push the barbed fitting in to the pipe.  If you have overheated the pipe it will fold back on itself.  If this is the case cut the pipe to a clean point and try again.  Once the fitting is in they can only be removed by cutting the pipe.  These are extremely durable and will give you piece of mind when leaving you irrigation systems 

  • Sharp barbs for extra grip
  • 6 bar pressure rated 
  • Suitable for use with LDPE pipe 
  • Made in Greece 

How to measure a thread size

All (or most) thread sizes used in water fittings in the home and garden are measured in BSP (British Standard Pipe Thread). BSP can sometimes be referred to as BSPF or the Whitworth Pipe Thread. Pipe thread can be parallel or tapered depending on the use that the fitting is going to be used for.

This standard is used in the UK and it ensures that items that are used in the gas, water and Hydraulics industry are compatible. For example when you connect your washing machine to the mains water the adapter will use a standard BSP ¾” thread. This standard is used in many parts of the World outside of the United States.

Each thread can be measured using the very simple table below and there is no need to look at the number of threads per inch

To summarize the simplest way to identify which thread you have is to measure the outside diameter (male thread) or the inside diameter for a female thread

BSP Thread 1/4" 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2"
Male Thread O/D mm 13 17 21 26.5 33.6 42 48 60
Female Thread I/D mm 11.5 15 18.6 24 30 38.5 45 57
Threads per inch (Take no Notice Of This) 19 19 19 14 14 11 11 11
  • Model: C32130162
  • 182 Units in Stock
  • Manufactured by: Palaplast

Be the first to write a review.  Write a Review.

This product was added to our catalog on Friday 10 October, 2008.