Model
Image
Item Name
Price+
C10680034
Budget hand punch The budget hand punched is used to punch a hole in the main supply tube which is either 16 or 20mm in diameter so that the dripper can be inserted and then the micro pipe attached to the end of the dripper Hole...
£1.04
Add:
C33020302
Reducing Nipple 1" - 3/4" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used in...
£0.86
Add:
C33020403
Reducing Nipple 11/4" - 1" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used...
£1.04
Add:
PAL203033
Barbed Elbow 32 mm Barbed elbow joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple providing the...
£1.16
Add:
C37250003
1 inch Female Threaded Tap Adaptor The Male Thread Will Mesure 33.6mm This is 1" BSP tap connector. This is an unusual thread and is normally used to connect on to hose carts. Most outdoor bibtaps will have a 3/4" BSP...
£1.05
Add:
CPAL10636006
Palaplast Inline Tap Suitable for 6mm O/D PVC flexible Pipe 4mmI/D
£1.05
Add:
PAL31032525
Barbed Tee Joint 25mm Barbed tee joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.87
Add:
C11603001
Back Nut 1/2" BSP Made In The EU Toughened Rigid Material For more information on pipe thread and how to measure them please click here
£1.05
Add:
C33510303
Threaded Socket 1" Female Bsp - 1" Female BSP Made In The EU 10 Bar Rated Seal threads with PTFE UV Stabilized For more information relating to threads and how to measure a British Standard Pipe Thread please click...
£1.05
Add:
C228520
Hose Reducer From 20mm - 13mm Inside Diameter Hose (3/4" - 1/2") Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose...
£1.07
Add:
C227522
Hose Elbow 20mm or 3/4" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£1.10
Add:
C228532
Hose Reducer From 25mm - 20mm Inside Diameter Hose (1" - 3/4") Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose...
£1.10
Add:
PAL11603004
Back Nut 11/4" BSP These are strong durable plastic fittings that are made from Polyamide. The material will give plenty of support and will allow for a strong non flexible grip to the thread. The material is suitable for in...
£1.21
Add:
C11041666
Barbed Cross 2 x 16mm - 2 X 6mm An easy push fot fittings that will give two take off points from a 16mm pipe so that you can run your 6mm micro pipe to baskets and containers. UV Stabilised Industrial grade plastic Simple...
£1.11
Add:
C33110333
Equal Tee Male Thread 1" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£1.12
Add:
PAL33310004
Threaded Plug 11/4" Male thread Made In The EU Seal the threads with PTFE For more information relating the the British Standard Pipe Thread and how to measure them please click here
£1.23
Add:
C002333
Threaded Bush 11/4" Male - 3/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£1.15
Add:
C226533
Hose Joiner For 25mm or 1" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£1.18
Add:
PAL205033
Barbed Tee Joint 32mm Barbed tee joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£1.32
Add:
C33550302
Thread Reducing Converter 1" Male - 3/4" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with...
£1.00
Add:
C37250002
Tap Connector Fits Standard Outside Bibtap With 3/4" BSP Thread The click fit connector with thread on to a standard outside Bibtap with a 3/4" BSP thread. Most outdoor taps will have a 3/4" BSP thread on the outlet. If...
£1.00
Add:
C002350
Threaded Bush 11/2" Male - 3/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£1.21
Add:
C32130202
20mm - 3/4" Swivel Connector Female Thread The 20 mm - 3/4" female threaded swivel tap connector is ideal for connecting 20mm pipe to any outside tap or timer. The connector can be used to connect 20 mm pipe to solenoid valves and...
£1.03
Add:
PAL33080202
Threaded Elbow 3/4" Male BSP - 3/4" Female Bsp This is a threaded elbow suitable for irrigation use. The elbow is made from polypropylene using the highest grade raw pellets Made In The EU 10 Bar Rated How to...
£1.37
Add:
C33550203
Thread Reducing Converter 3/4" Male - 1" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with...
£1.04
Add:
PAL206032
Barbed Push Fit Tee 32mm x32mm x 1" Male BSP Thread The barbed male Tee to 32mm push fit barbs are used exclusively with LDPE pipe. This is a thinner walled pipe than the MDPE which is used underground and should be used with compression...
£1.39
Add:
C228222
Hose Tee 20mm or 3/4" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£1.26
Add:
C47290000
Click Fit 3 Way Hose Connector A simple connector that will join 2 hoses to one so ideal for watering various areas of teh garden at the same time. Click fit fittings together in order to extend hose pipe. The fitting is made in the EU...
£1.28
Add:
C33020402
Reducing Nipple 11/4" - 3/4" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used...
£1.28
Add:
C227533
Hose Elbow 25mm or 1" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£1.29
Add:
C11041616
Push Fit Cross 16 mm The Cross is used to split runs from 1 - 3 outlets.
£1.31
Add:
C33550202
Thread Converter 3/4" Male - 3/4" Female The thread reducing converter is used to change a male thread to a female thread and at the same time to reducing or increasing the thread size. If you are unfamilar with thread...
£1.31
Add:
C002360
Threaded Bush 11/2" Male - 1" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a thread...
£1.33
Add:
C002335
Threaded Bush 11/4" Male - 1" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a thread...
£1.33
Add:
PAL33080303
Threaded Elbow 1" Male BSP - 1" Female Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.48
Add:
C002250
Threaded Bush 1/2" Male - 1/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£1.36
Add:
PAL203034
Barbed Elbow 32mm x 1" BSP Male Thread Barbed elbow joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£1.51
Add:
PAL33610004
Female Threaded Cap And O Ring 1 1/4" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£1.51
Add:
PAL33080101
Threaded Elbow 1/2" Male BSP - 1/2" Female Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.53
Add:
PAL33080102
Threaded Elbow 1/2" Male BSP - 3/4" Female Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.53
Add:
C11603002
Back Nut 3/4" BSP Made In The EU Toughened Rigid Material For more information on pipe thread and how to measure them please click here
£1.05
Add:
C37180002
Accessory Adapter 3/4" Male BSP Thread This is a simple to use product and is normally used to fir spray guns or other similar type objects so that they will attach to the standard female click fit connector. The part is made from high...
£1.28
Add:
PAL33610005
Female Threaded Cap And O Ring 11/2" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£1.55
Add:
C851200
Pipe Saddle 25mm saddle - 1/2" Female Thread (10Bar) Pipe saddles are used to make simple connections in to the side of a supply tube. The saddle is attached round the pipe and tightened up using the bolts supplied. A hole is...
£1.41
Add:
PAL11603005
Back Nut 1 1/2"" BSP The back not is made from Polyamide which is strong and rigid. This will allow for a secure non stretching grip to the male thread. The material is UV stabilised so suitable for indoor or...
£1.41
Add:
C31610120
20mm - 1/2" Male BSP Thread Control Valve This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. It is ideal product to use with LDPE as the sharp barb form a permanent...
£1.44
Add:
C31610220
20mm - 3/4" Male BSP Thread Control Valve This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. It is ideal product to use with LDPE as the sharp barb form a permanent...
£1.44
Add:
C47280000
Click Fit 2 Way Hose Connector A simple connector that will join to click fit fittings together in order to extend hose pipe. The fitting is made in the EU from high grade industrial plastic that is UV stabilised Made in the EU...
£1.19
Add:
C002350
Threaded Bush 11/2" Male - 3/4" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£1.44
Add:
C31810162
Barbed Tee 16mm x 16mm Branch 3/4" BSP Female Thread Barbed Tee joint 16 mm is suitable for use with LDPE 16mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£1.32
Add:
C31572020
20 mm Barbed Control Valve This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. It is ideal product to use with LDPE as the sharp barb form a permanent secure attachment. ...
£1.47
Add:
PAL30510850
50cm Stake Suitable for Use With Bed Sprayers Using Eindor Fittings The Eindor compatible stake is available in either 40 or 50cm in height. The stake can be used with Eindor compatible fittings which include the pal sprayer....
£1.24
Add:
C851302
Pipe Saddle 32mm - 1" BSPF Female thread Pipe saddles are used to make simple connections in to the side of a supply tube. The saddle is attached round the pipe and tightened up using the bolts supplied. A hole is then drilled into...
£1.50
Add:
C005138
Reducing Nipple 2" - 1/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used in...
£1.55
Add:
PAL44100303
Threaded Elbow 1" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.70
Add:
C226544
Hose Joiner For 32mm or 11/4" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£1.56
Add:
C228233
Hose Tee 25mm or 1" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£1.56
Add:
PAL30640037GH
Greenhouse Distribution Pipe Support Hold the greenhouse pipe in place and makes sure that the plants receive the water that they need Height - 15cms
£1.58
Add:
C228543
Hose Reducer From 32mm - 25mm Inside Diameter Hose (11/4" - 1") Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose...
£1.58
Add:
PAL44100202
Threaded Elbow 3/4" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.58
Add: