Model-
Image
Item Name
Price
TC6MMFILT
Tap Connector - 6mm Micro Tube With Filter A threaded adapter 3/4" BSP female thread to 6mm push fit Eindor fitting. This simple unit will thread on to an outside tap, timer or solenoid valve and allow you to connect the 6mm micro...
£2.77
Add:
S602IBCF
IBC Thread Converter s60 - 2" BSPF Female thread Used to convert the thread on an IBC to a Britsh Standard Pipe Thread so that water fittings can be attached to the outlet
£19.91
Add:
PFC16161616
Push Fit Cross for 13 mm The Cross is used to split runs from 1 - 3 outlets.
£1.01
Add:
PDTT125
£82.50
details Sold Out
PAL44110666
Equal Tee Female Thread 2" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£7.87
Add:
PAL44110555
Equal Tee Female Thread 11/2" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£6.90
Add:
PAL44110444
Equal Tee Female Thread 11/4" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£3.94
Add:
PAL44110333
Equal Tee Female Thread 1" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£2.18
Add:
PAL44110222
Equal Tee Female Thread 3/4" Made In The EU 10 Bar Rated For mnore information on British Standard Pipe Thread and how to measure the thread please click here
£1.76
Add:
PAL44100606
Threaded Elbow 2" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£7.19
Add:
PAL44100505
Threaded Elbow 11/2" Female Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£6.37
Add:
PAL44100404
Threaded Elbow 11/4" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£2.97
Add:
PAL44100303
Threaded Elbow 1" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.70
Add:
PAL44100202
Threaded Elbow 3/4" Female Thread Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.58
Add:
PAL44100101
Threaded Elbow 1/2" Female Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.11
Add:
PAL41601005
Rubber Washer For Back Nuts Suitable For 11/2" BSP Threads Rubber Back washer Made in Europe outside diameter 64 mm Inside Dimeter of hole 48mm Thickness 3mm width of rubber 8mm
£0.58
Add:
PAL41601004
Rubber Washer For Back Nuts Suitable For 11/4" BSP Threads Rubber Back washer Made in Europe outside diameter 60 mm Inside Dimeter of hole 44 mm Thickness 3mm width of rubber 8mm
£0.54
Add:
PAL41601003
Rubber Washer For Back Nuts Suitable For 1" BSP Threads Rubber Back washer Made in Europe outside diameter40 mm Inside Dimeter of hole 30 mm Thickness 3mm width of rubber 4mm
£0.59
Add:
PAL33612002
Female Threaded Cap And O Ring 3/4" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.50
details Sold Out
PAL33612001
Female Threaded Cap And O Ring 1/2" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.39
Add:
PAL33610006
Female Threaded Cap And O Ring 2" BSP Female Thread Made from 100 % virgin Polypropylene this cap is 10 bar rated. The O ring fits inside the cap making a waterproof seal without the need for PTFE tape Made In The EU 100%...
£2.88
Add:
PAL33610005
Female Threaded Cap And O Ring 11/2" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£1.55
Add:
PAL33610004
Female Threaded Cap And O Ring 1 1/4" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£1.51
Add:
PAL3352/0605
Reducing Socket 2" - 11/2" Female Thread As with all threaded fittinsg you should use PTFE tape on all threads in order to seal them. Made in the EU Pressure rated to 10 bar How to measure a thread size All (or most)...
£3.50
Add:
PAL33310004
Threaded Plug 11/4" Male thread Made In The EU Seal the threads with PTFE For more information relating the the British Standard Pipe Thread and how to measure them please click here
£1.23
Add:
PAL33310002
Threaded Plug 3/4" Male thread Made In The EU Seal the threads with PTFE For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.35
Add:
PAL33213203
Barbed Connector 32mm - 1" Male BSP Thread Barbed Connector joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.77
Add:
PAL33212503
Barbed Connector 25mm - 1" Male BSP Thread Barbed Connector joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.51
Add:
PAL33100101
Threaded Elbow 1/2" Male BSP - 1/2" Male Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£0.79
Add:
PAL33080303
Threaded Elbow 1" Male BSP - 1" Female Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.48
Add:
PAL33080202
Threaded Elbow 3/4" Male BSP - 3/4" Female Bsp This is a threaded elbow suitable for irrigation use. The elbow is made from polypropylene using the highest grade raw pellets Made In The EU 10 Bar Rated How to...
£1.37
Add:
PAL33080102
Threaded Elbow 1/2" Male BSP - 3/4" Female Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.53
Add:
PAL33080101
Threaded Elbow 1/2" Male BSP - 1/2" Female Bsp Made In The EU 10 Bar Rated For more information on British Standard Pipe Thread and how to measure the thread please click here
£1.53
Add:
PAL32701602
16mm barbed Stopend With Drain Cap This 16mm barbed stopend has a removable cap to allow lines to be drained down as required. The cap has an O ring inside which makes sure that once the cap is replaced that the water stays in the...
£1.02
Add:
PAL32410253
£0.58
Add:
PAL32410202
£0.26
Add:
PAL32310025
Palapalst 25mm Grip Ring For Nutlock Fittings Used with the 25mm Coupling nuts on 1" BSP Threaded fittings. These convert the ends to a semi compression fitting used with LDPE pipe above or just below the surface
£0.30
Add:
PAL31820252
Barbed Elbow 25mm x 3/4" BSP Male Thread Barbed elbow joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.97
Add:
PAL31800252
Barbed Push Fit Tee 25mm x25mm x 3/4" Male BSP Thread The barbed male Tee to 25mm push fit barbs are used exclusively with LDPE pipe. This is a thinner walled pipe than the MDPE which is used underground and should be used with...
£0.77
Add:
PAL31790217
Palaplast Tap 16mm T-Tape to a 3/4 Inch BSP Male thread
£2.77
Add:
PAL31610225
25mm - 3/4" Male BSP Thread Control Valve This is a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned. It is ideal product to use with LDPE as the sharp barb form a permanent...
£2.06
Add:
PAL31060032
Barbed Stopend 32mm Barbed Stop End 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.49
Add:
PAL31042520
Barbed Reducing Tee 25 x 25 x 20mm Branch Barbed Reducing Tee joint 25 mm - 20mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the...
£0.74
Add:
PAL31032525
Barbed Tee Joint 25mm Barbed tee joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.87
Add:
PAL31022525
Barbed Elbow 25 mm Barbed elbow joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple providing the...
£0.65
Add:
PAL31002525
Barbed Straight Connector 25mm Barbed joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is...
£0.42
Add:
PAL30910000
Adjustable Dripper 0 - 70 litres per hour This barbed dripper/mini sprinkler has a barbed end which can either be inserted directly in to LDPE pipe or it can be used with a 6mm outside diameter ( 4mm inside diameter ) PVC Flexible...
£0.42
Add:
PAL30640037GH
Greenhouse Distribution Pipe Support Hold the greenhouse pipe in place and makes sure that the plants receive the water that they need Height - 15cms
£1.58
Add:
PAL30520060
Eindor Connection Tubing 60cm Length Connects stake head to header or supply tube 80cm long with Eindor Barbed Collar either end use with Eindor plunger Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm...
£0.56
Add:
PAL30510850
50cm Stake Suitable for Use With Bed Sprayers Using Eindor Fittings The Eindor compatible stake is available in either 40 or 50cm in height. The stake can be used with Eindor compatible fittings which include the pal sprayer....
£1.24
Add:
PAL30240105
Pal Stable Angled Sprayer 180º 105 L/H ) 4 Meter Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse or beds and...
£0.55
Add:
PAL30230090
Pal Stable Angled Sprayer 90º 90 L/H 3.5 Meter Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse or beds...
£0.55
Add:
PAL30230040
Pal Stable Angled Sprayer 90º 40 L/H A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse or beds and borders....
£0.55
Add:
PAL30130160
Pal Stable Special Sprayer 360º 160 L/H 5 Metre Diameter A simple reliable commercial grade spray nozzle with spinning water distributor for even coverage. The nozzle is tough and durable and is ideal to use in a greenhouse...
£0.55
Add:
PAL206032
Barbed Push Fit Tee 32mm x32mm x 1" Male BSP Thread The barbed male Tee to 32mm push fit barbs are used exclusively with LDPE pipe. This is a thinner walled pipe than the MDPE which is used underground and should be used with compression...
£1.39
Add:
PAL205033
Barbed Tee Joint 32mm Barbed tee joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£1.32
Add:
PAL203034
Barbed Elbow 32mm x 1" BSP Male Thread Barbed elbow joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£1.51
Add:
PAL203033
Barbed Elbow 32 mm Barbed elbow joint 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple providing the...
£1.16
Add:
PAL200033
Barbed Straight Connector 32mm Barbed joint 25 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is...
£0.72
Add:
PAL11603006
Back Nut 2" BSP This is a threaded back nut with a 2" British standard thread. It is made from Polyamide and this is a very rigid plastic that will give plenty of support with bending. The material is UV stabilised so...
£4.39
Add: