Your cart is empty.

16mm Barbed Fittings

16mm Barbed Fittings

The standard barbed fitting is used for connecting 16mm LDPE pipe together.  The Fittings are made in the EU using UV stabilised plastic.  The sharp barbs make sure that the Joint is reliable and once fitted they are rated to 6 bar unlike normal domestic barbed fittings that are rated to pressures between 2.1 and 2.8 bar.  The reason for this superior performance is the and number of barbs and their shape.  Once fitted they are almost impossible to remove and if a mistake is made in many cases they have to be cut off.  This is because of the size and sharpness of the barb and this can only be made with precise tooling and technical expertise found in European factories. 

Using Barbed Fittings

Barbed fittings can be pushed straight in to 16 mm outside diameter LDPE pipe.  This is however a lot of pushing and can be made much easier by heating the pipe prior to installation.  If you are fitting a few fittings then leaving the pipe in a warm place over night or in the sun during the day will ease installation however if you are fitting a lot of them then you should heat the end of the pipe in some very hot water or heat it using a Blow torch.  If you are using a blow torch then position the pipe in the flame so that the heat is evenly spread round the pipe.  Hold it in the flame for 2 seconds and then remove it from the flame.  Now insert the barbed fitting in to the pipe. 

If you are using hot water then dip the end of the pipe in the water and allow it to warm up.  Remove it from the hot water and insert the fitting




Model Image Item Name Price
WP16mm10
16mm Black LDPE Water Pipe (4Bar) 10 Metre Roll

16mm Black LDPE Water Pipe (4Bar) 10 Metre Roll

16mm Black LDPE Water Pipe (4Bar) A superb light and easy to use black water supply tube suitable for above ground installation.  The pipe is thin walled and so suitable for the push fit barbed connectors.   4 Bar pressure Rated Pipe ...
£10.15
Add:
WP16mm25
16mm Black LDPE Water Pipe (4Bar) 25 Metre Roll

16mm Black LDPE Water Pipe (4Bar) 25 Metre Roll

16mm Black LDPE Water Pipe (4Bar) A superb light and easy to use black water supply tube suitable for above ground installation.  The pipe is thin walled and so suitable for the push fit barbed connectors.   4 Bar pressure Rated Pipe ...
£18.60
details
 Sold Out 
WP16mm50
16mm Black LDPE Water Pipe (4Bar) 50 Metre Roll

16mm Black LDPE Water Pipe (4Bar) 50 Metre Roll

16mm Black LDPE Water Pipe (4Bar) A superb light and easy to use black water supply tube suitable for above ground installation.  The pipe is thin walled and so suitable for the push fit barbed connectors.   4 Bar pressure Rated Pipe ...
£25.40
Add:
C31810162
16mm Barbed Tee - 3/4" Female BSP Thread

16mm Barbed Tee - 3/4" Female BSP Thread

Barbed Tee 16mm x 16mm Branch 3/4" BSP Female Thread  Barbed Tee joint 16 mm is suitable for use with LDPE 16mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£1.32
Add:
90HOZENET
Netafim Elbow Hose Connector

Netafim Elbow Hose Connector

Netafim Elbow Hose Connector   Used to push on to the end of a 16mm water pipe so that a standard 1/2" hose can be quickly clicked on and off  at 90° to the pipe  
£3.65
Add:
C32130162
Tap Connector 3/4" Female Thread - 16mm Barbed

Tap Connector 3/4" Female Thread - 16mm Barbed

Barbed 16mm Fitting - 3/4" Female threaded swivel or Tap connector  The swivel connector can be used for many applications including attaching your irrigation system to an outside tap or water time.  The fittings is self sealing as it...
£0.83
Add:
C31060016
Barbed Stopend 16mm

Barbed Stopend 16mm

Barbed Stopend For 16mm Outside Diameter Pipe  The stopend is used to terminate the end of 16mm outside diameter or 13mm inside diameter pipe.  The large barbs make sure that the fitting once fitted stays fitted unlike other domestic...
£0.35
Add:
C31001616
Barbed Straight Connector 16mm

Barbed Straight Connector 16mm

Barbed Straight Connector 16mm  Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together.  The connector is made from a strong industrial grade UV stabilised plastic.  The connector can be used on any thin...
£0.34
Add:
C31031616
Barbed Tee Joint 16mm

Barbed Tee Joint 16mm

Barbed 16mm Tee Joint   Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together.  The connector is made from a strong industrial grade UV stabilsed plastic.  The connector can be used on any thin walled pipe...
£0.41
Add:
C31021616
Barbed Elbow Joint 16mm

Barbed Elbow Joint 16mm

16mm Barbed Elbow Joint  Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together.  The elbowr is made from a strong industrial grade UV stabilsed plastic.  The connector can be used on any thin walled pipe...
£0.40
Add:
HOZENET
Netafim Hose Connector

Netafim Hose Connector

Netafim Hose Connector   Used to push on to the end of a 16mm water pipe so that a standard 1/2" hose can be quickly clicked on and off       
£4.28
Add:
C31012016
Push Fit Reducer 20 - 16mm

Push Fit Reducer 20 - 16mm

Barbed Reducing Straight Connector 20mm - 16mm  Used to reduce 20mm LDPE outside diameter pipe to 16mm.  This is ideal when you are using long runs of pipe. Using 20mm pipe over long runs will make sure that you loose as little water flow...
£0.39
Add:
C31042016
Reducing Tee 20mm x 20mm x 16mm Branch

Reducing Tee 20mm x 20mm x 16mm Branch

Reducing Push Fit Tee 20mm x20mm x16mm  Can be used with any LDPE 20mm or 16mm.   The connector is made from a strong industrial grade UV stabilsed plastic.  The connector can be used on any thin walled pipe like LDPE water pipe or...
£0.56
Add:
C33211601
Barbed 16mm Connector To 1/2" BSP Male thread

Barbed 16mm Connector To 1/2" BSP Male thread

Barbed 16mm - 1/2" Male BSP Threaded connector  Used with 16mm outside diameter or 13mm inside diameter LDPE pipe.  Finishes LDPE pipe with a British standard pipe thread making this a very useful fittings when connecting to larger...
£0.33
details
 Sold Out 
C33211602
Barbed Connector 16mm - 3/4" male BSP

Barbed Connector 16mm - 3/4" male BSP

Barbed Straight Coupling  16mm - 3/4" male bsp thread Barbed  joint 16 mm is suitable for use with LDPE 16 mm outside diameter or 13mm inside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs...
£0.33
Add:
C31210016
Foldover Stopend 16mm

Foldover Stopend 16mm

16mm Foldover stopend  The foldover stopend is probably the most simple and reliable end to a p16 mm LDPE water pipe.  It is quick to fit and above all is totally reliable as it is impossible for it to push off the end of the pipe.  ...
£0.18
Add:
C31571616
16mm Barbed Ball Valve

16mm Barbed Ball Valve

Barbed 16mm Ball Valve  The barbed ball valve is ideal for restricting flow or turning off the flow to certain parts of the system.  The valve can be used in many applications and has a high level of reliability.  The barbed ends have...
£1.71
Add:
C31820161
Barbed Elbow Joint 16mm x 1/2 inch male BSP thread

Barbed Elbow Joint 16mm x 1/2 inch male BSP thread

Barbed Elbow Joint 16mm - 1/2" Male BSP Thread  Used with 16mm outside diameter or 13mm inside diameter LDPE pipe.  Finishes LDPE pipe with a British standard pipe thread making this a very useful fittings when connecting to larger...
£0.58
Add:
C31820162
Barbed Elbow Joint 16mm x 3/4 inch male BSP thread

Barbed Elbow Joint 16mm x 3/4 inch male BSP thread

Barbed Elbow 16mm - 3/4" BSP MaleThread  Used with 16mm outside diameter or 13mm inside diameter LDPE pipe.  Finishes LDPE pipe with a British standard pipe thread making this a very useful fittings when connecting to larger diameter...
£0.47
Add:
C206002
Barbed Tee Joint 16mm - 1/2 Inch Bsp Threaded Branch

Barbed Tee Joint 16mm - 1/2 Inch Bsp Threaded Branch

Barbed T Joint Branch 1/2" Male Thread  A barbed Tee fitting with a 1/2" male threaded.  The large barbs make sure that the fitting once fitted stays fitted unlike other domestic brands that can only operate and pressures of...
£0.42
Add:
C31800162
Barbed Tee Joint 16mm - 3/4 Inch Bsp Threaded Branch

Barbed Tee Joint 16mm - 3/4 Inch Bsp Threaded Branch

Barbed Tee -3/4" Male Threaded Branch  A barbed Tee fitting with a 3/4" male BSP thread.  The large barbs make sure that the fitting once fitted stays fitted unlike other domestic brands that can only operate and pressures of...
£0.60
Add:
Z2519
Tavlit Push Fit 3 Way Connector 16mm - 3/4" BSP

Tavlit Push Fit 3 Way Connector 16mm - 3/4" BSP

Tavlit Push Fit 3 Way Connector  16mm - 3/4" BSP This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe.   Tavlit fittings are more expensive...
£2.22
Add:
Z2526
Tavlit Push Fit 3 Way Connector 16mm- 3/4"

Tavlit Push Fit 3 Way Connector 16mm- 3/4"

Tavlit Push Fit 3 way Connector 16mm - 3/4" This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe.   Tavlit fittings are more expensive than the...
£4.26
Add:
Z2531
Tavlit Push Fit 4 Way Connector 16mm - 3/4" Female

Tavlit Push Fit 4 Way Connector 16mm - 3/4" Female

Tavlit Push Fit 4 way Connector 16mm - 3/4" This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe.   Tavlit fittings are more expensive than the...
£4.70
Add:
Z2536
Tavlit Push Fit 6 Way Connector 16mm - 3/4" Female

Tavlit Push Fit 6 Way Connector 16mm - 3/4" Female

Tavlit Push Fit 6 way Connector 16mm - 3/4"   This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe.   Tavlit fittings are more expensive than...
£4.70
Add:
Z2511
Tavlit Push Fit Y Piece 16mm - 3/4" BSP

Tavlit Push Fit Y Piece 16mm - 3/4" BSP

Tavlit Push Fit Y Connector 16mm - 3/4" This is a high grade heavy duty push fit fitting 16mm external diameter 4 bar pipe or with Netafim 16mm pressure compensated drip pipe.   Tavlit fittings are more expensive than the...
£2.26
Add:
C31121620
Techline 16mm - 20 mm Pipe Stake

Techline 16mm - 20 mm Pipe Stake

Pipe Pegs For 16 Or 20 mm Pipes Used to stake down pipes in the garden making installation a lot easier .  Can be used on both 16 and 20 mm low or high water pressure pipe including PVC water pipe if needed.  We would suggest that you will...
£0.45
Add:
C31610216
16mm Ball Valve 16mm - 3/4" BSP Male Thread

16mm Ball Valve 16mm - 3/4" BSP Male Thread

Ball Valve 16mm Barbed - 3/4" BSP Male Thread  Made in Europe from industrial grade plastic.  A simple ball valve that can be used with 16mm LDPE external diameter pipe or 13mm internal diameter.  These sharp barbs hold a secure...
£1.57
Add:
C11041616
Push Fit Cross 16mm

Push Fit Cross 16mm

Push Fit Cross 16 mm  The Cross is used to split runs from 1 - 3 outlets.  
£1.31
Add:
C31590202
Threaded Tap 3/4 Inch Male - Female Valve

Threaded Tap 3/4 Inch Male - Female Valve

Threaded Valve  3/4 Inch Male - Female Valve made in the Eu this is a precise valve that can be used to regulate or turn off water flow to individual zones.  The tap has a 3/4" Male thread at one end and a 3/4" Female thread on...
£2.09
Add:
C11041666
Barbed Cross 2 x 16mm - 2 x 6mm

Barbed Cross 2 x 16mm - 2 x 6mm

Barbed Cross 2 x 16mm - 2 X 6mm  An easy push fot fittings that will give two take off points from a 16mm pipe so that you can run your 6mm micro pipe to baskets and containers.   UV Stabilised  Industrial grade plastic  Simple...
£1.11
Add:
PAL32701602
16mm Barbed Draining Stopend

16mm Barbed Draining Stopend

16mm barbed Stopend With Drain Cap    This 16mm barbed stopend has a removable cap to allow lines to be drained down as required.  The cap has an O ring inside which makes sure that once the cap is replaced that the water stays in the...
£1.02
details
 Sold Out 
CPC16
Pipe Clip 16mm (Pack 25)

Pipe Clip 16mm (Pack 25)

Pipe Clip 16mm Plastic 16mm pipe clip with masonry nail  
£4.87
Add: