Model
Image
Item Name
Price+
CPAL31010606
Barbed 6mm Pipe Connector Barbed pipe joiner which will join together 6mm outside diameter flexible black pipe.
£0.12
Add:
C31210020
20 mm Foldover Stopend The foldover stopend is probably the most positive stopend available for 20mm LDPE pipe when using a push fit system. Foldover stopends are quicker to use than the push fit end stops plus they are more reliable as they...
£0.18
Add:
CPAL30660006
Straight Coupling 6mm To Supply Tube Used to connect 6mm micro tube - 16 or 20mm pipe Use with 3mm hole punch
£0.16
Add:
3121/0013
Foldover Stopend for 13mm inside diameter pipe Just slip through the first hole and fold back in to the second hole forming a water tight seal Pressure tested to 90 psi Very simple to install Made In The Eu
£0.22
Add:
C31100016
Plastic Support Hooks For Greenhouses, Poly tunnels and Fruit Cages The plastic support hooks is used to hold pipe up high via a stretched wire so that the pipe is supported so that supply pipes are up in the air and out of the way Made...
£0.21
details Sold Out
C31210016
16mm Foldover stopend The foldover stopend is probably the most simple and reliable end to a p16 mm LDPE water pipe. It is quick to fit and above all is totally reliable as it is impossible for it to push off the end of the pipe. ...
£0.18
Add:
CPAL31150666
Barbed Mini Tee 6mm A very simple push fit tee made from a high grade tough plastic by Palplast Very strong Simple push fit Made in the EU
£0.22
Add:
PAL32410202
£0.26
Add:
C33010101
Threaded Nipple 1/2" BSP - 1/2" BSP The high quality plastic threaded nipple is used to join the same threads together or can be used to convert a female thread to a male thread. The fittings should be used with PTFE tape or...
£0.26
Add:
CPAL30540006
Eindor 6mm Pipe Adapter to Eindor Fitting The Eindor pipe adapter is used to insert in to the LDPE supply pipe. The barbed section is broader and the Eindor end is a female Eindor. You would punch a 3mm hole using a pipe punch in to the LDPE...
£0.22
Add:
C311100025
Plastic Support Hooks For Greenhouses, Poly tunnels and Fruit Cages The plastic support hooks is used to hold pipe up high via a stretched wire so that the pipe is supported so that supply pipes are up in the air and out of the way Made...
£0.29
details Sold Out
PAL32310025
Palapalst 25mm Grip Ring For Nutlock Fittings Used with the 25mm Coupling nuts on 1" BSP Threaded fittings. These convert the ends to a semi compression fitting used with LDPE pipe above or just below the surface
£0.30
Add:
CPAL30120070
Vibro Spin Nozzle 70 lph 3 meter spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy site. ...
£0.32
Add:
CPAL30120105
Vibro Spin Nozzle 105 lph 4 metre spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy...
£0.32
Add:
CPAL30120160
Vibro Spin Nozzle 160 lph 5 metre spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy...
£0.32
Add:
CPAL30120090
Vibro Spin Nozzle 90 lph 3.5 metre spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy...
£0.32
Add:
CPAL3012060
Vibro Spin Nozzle 60 lph 2.5 metre spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy site. ...
£0.32
Add:
CPAL30120120
Vibro Spin Nozzle 120 lph 4.5 metre spray diameter 360 degree spray The Vibro Spin Bed sprayer produces a very even droplet size which is ideal for watering beds and borders as the droplet size is quite large reducing spray drift on windy...
£0.32
Add:
PAL33310002
Threaded Plug 3/4" Male thread Made In The EU Seal the threads with PTFE For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.35
Add:
C33010202
Threaded Nipple 3/4" BSP - 3/4" BSP The high quality plastic threaded nipple is used to join the same threads together or can be used to convert a female thread to a male thread. The fittings should be used with PTFE tape or...
£0.30
Add:
C33211602
Barbed Straight Coupling 16mm - 3/4" male bsp thread Barbed joint 16 mm is suitable for use with LDPE 16 mm outside diameter or 13mm inside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs...
£0.33
Add:
CPAL31170606
6mm Elbow Push Fit Used with the standard flexible 6mm pipe this is a simple push fit elbow to make installation clean and tidy. When installing we would suggest heating the 6 mm polythene pipe up to using hot water and this will make...
£0.33
Add:
C31060020
Barbed Stopend 20mm Barbed Stop End t 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.35
Add:
C31002020
Barbed Connector 20mm Barbed connector joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is...
£0.35
Add:
PAL33612001
Female Threaded Cap And O Ring 1/2" Female Thread Made In The EU O Ring Seal For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.39
Add:
C33310001
Threaded Plug 1/2" Male thread Made In The EU Seal the threads with PTFE For more information relating the the British Standard Pipe Thread and how to measure them please click here
£0.35
Add:
3106/0013
Barbed Stopend 13mm Inside Diameter LDPE pipe 13 mm LDPE pipe has an outside diameter of 16mm. Water pipe should always be measured on the outside however many retail brands of irrigation pipe measure the inside diameter of...
£0.40
Add:
C33211601
Barbed 16mm - 1/2" Male BSP Threaded connector Used with 16mm outside diameter or 13mm inside diameter LDPE pipe. Finishes LDPE pipe with a British standard pipe thread making this a very useful fittings when connecting to larger...
£0.33
Add:
3100/1313
Barbed Straight Connector For 13mm This straight connector is suitable for use with all pipes made from LDPE with an inside diameter of 13 mm, indeed it will fit pipes with an inside diameter of up to 13.6 mm. The reason for this is...
£0.41
Add:
PAL31002525
Barbed Straight Connector 25mm Barbed joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is...
£0.42
Add:
C33212001
Barbed 20mm - 1/2" Male Bsp Thread Barbed connector 20 mm - 1/2" BSP is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to...
£0.40
Add:
C31001616
Barbed Straight Connector 16mm Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together. The connector is made from a strong industrial grade UV stabilised plastic. The connector can be used on any thin...
£0.34
details Sold Out
C206002
Barbed T Joint Branch 1/2" Male Thread A barbed Tee fitting with a 1/2" male threaded. The large barbs make sure that the fitting once fitted stays fitted unlike other domestic brands that can only operate and pressures of...
£0.42
Add:
PAL30910000
Adjustable Dripper 0 - 70 litres per hour This barbed dripper/mini sprinkler has a barbed end which can either be inserted directly in to LDPE pipe or it can be used with a 6mm outside diameter ( 4mm inside diameter ) PVC Flexible...
£0.42
Add:
C226511
Hose Joiner For 13mm or 1/2" Inside Diameter Hose Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£0.42
Add:
C31060016
Barbed Stopend For 16mm Outside Diameter Pipe The stopend is used to terminate the end of 16mm outside diameter or 13mm inside diameter pipe. The large barbs make sure that the fitting once fitted stays fitted unlike other domestic...
£0.35
Add:
C33020201
Reducing Nipple 3/4" - 1/2" BSP Simple nipple which will reduce the size of the thread. Remember to seal the threads with PTFE tape Made In The EU How to measure a thread size All (or most) thread sizes used...
£0.36
Add:
C31060025
Barbed Stopend 25mm Barbed Stop End 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.40
Add:
C31022020
Barbed Elbow 20 mm Barbed elbow joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple providing the...
£0.45
Add:
C31032020
Barbed 20mm Tee Joint Barbed Tee joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.45
Add:
PAL33212503
Barbed Connector 25mm - 1" Male BSP Thread Barbed Connector joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.51
Add:
HAD228211
Hose Tee 13mm or 1/2" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from Polypropylene ...
£0.51
Add:
3102/1313
Barbed Elbow For 13mm Inside Diameter LDPE Water Pipe This barbed Elbow is suitable for use with all pipes made from LDPE with an inside diameter of 13 mm, indeed it will fit pipes with an inside diameter of up to 13.6 mm. The reason for...
£0.51
Add:
C31012016
Barbed Reducing Straight Connector 20mm - 16mm Used to reduce 20mm LDPE outside diameter pipe to 16mm. This is ideal when you are using long runs of pipe. Using 20mm pipe over long runs will make sure that you loose as little water flow...
£0.39
Add:
C31820162
Barbed Elbow 16mm - 3/4" BSP MaleThread Used with 16mm outside diameter or 13mm inside diameter LDPE pipe. Finishes LDPE pipe with a British standard pipe thread making this a very useful fittings when connecting to larger diameter...
£0.47
Add:
C31031616
Barbed 16mm Tee Joint Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together. The connector is made from a strong industrial grade UV stabilsed plastic. The connector can be used on any thin walled pipe...
£0.41
Add:
C227511
Hose Elbow 13mm or 1/2" Hose Pipe Used to join standard hose together with the use of a jubilee clip. These have low profile barbs suitable for using with flexible hose or lay flat hose pipe. Made from...
£0.49
Add:
PAL31060032
Barbed Stopend 32mm Barbed Stop End 32 mm is suitable for use with LDPE 32 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe. Installation is simple...
£0.49
Add:
PAL30520060
Eindor Connection Tubing 60cm Length Connects stake head to header or supply tube 80cm long with Eindor Barbed Collar either end use with Eindor plunger Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm...
£0.56
Add:
C002310
Threaded Bush 3/4" Male - 1/2" BSPF used to reduce down male threads or increase male threads Please read the information below for more information relating to thread sizes and how to measure them How to measure a...
£0.43
Add:
C31021616
16mm Barbed Elbow Joint Used to connect 16mm outside diameter or 13 mm inside diameter LDPE pipe together. The elbowr is made from a strong industrial grade UV stabilsed plastic. The connector can be used on any thin walled pipe...
£0.40
Add:
C41601001
Rubber Washer For Back Nuts Suitable For 1/2" BSP Threads Rubber Back washer Made in Europe outside diameter 35 mm Inside Dimeter of hole 21mm Thickness 2mm width of rubber 8mm
£0.53
Add:
PAL41601005
Rubber Washer For Back Nuts Suitable For 11/2" BSP Threads Rubber Back washer Made in Europe outside diameter 64 mm Inside Dimeter of hole 48mm Thickness 3mm width of rubber 8mm
£0.58
Add:
C31121620
Pipe Pegs For 16 Or 20 mm Pipes Used to stake down pipes in the garden making installation a lot easier . Can be used on both 16 and 20 mm low or high water pressure pipe including PVC water pipe if needed. We would suggest that you will...
£0.45
Add:
PAL41601004
Rubber Washer For Back Nuts Suitable For 11/4" BSP Threads Rubber Back washer Made in Europe outside diameter 60 mm Inside Dimeter of hole 44 mm Thickness 3mm width of rubber 8mm
£0.54
Add:
c33212502
Barbed Connector 25mm - 3/4" Male BSP Thread Barbed Connector joint 25 mm is suitable for use with LDPE 25 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.51
Add:
C31820201
Barbed 20mm Elbow - 1/2 Inch Bsp Thread Barbed elbow joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe....
£0.56
Add:
C31042012
Reducing Push Fit Tee 20mm x20mm x12mm Can be used with any LDPE 20mm or 16mm. The connector is made from a strong industrial grade UV stabilsed plastic. The connector can be used on any thin walled pipe like LDPE water pipe or...
£0.56
Add:
C31042016
Reducing Push Fit Tee 20mm x20mm x16mm Can be used with any LDPE 20mm or 16mm. The connector is made from a strong industrial grade UV stabilsed plastic. The connector can be used on any thin walled pipe like LDPE water pipe or...
£0.56
Add:
PAL32410253
£0.58
Add: