Your cart is empty.

6mm Eindor Fittings

Eindor Fittings 

Eindor fittings are quite unique.  There are several parts to Eindor fittings and initially this can be quite confusing however when explained it is an easy and obvious product choice.

The Barbed end 

There are two types of barbed end on an Eindor fitting and both are often used.  The slimmer barbed end ( and normally longer in length) is inserted inside a 6 mm flexible pipe.  The fatter barbed fittings ( which is normally shorter and has just 1 barb ) is normally inserted in to an LDPE pipe.  LDPE pipe.  A small 3mm hole is punched in to the LDPE pipe and then the barbed end is inserted in to this hole.  This can be quite stiff as once inserted the barb has a pressure rating of 6bar.  

The Eindor End 

The Eindor part that has been inserted in to the LDPE pipe has a wider Eindor end.  This is called a female Eindor.  The part that has been inserted in to the 6mm pipe has a smaller Eindor end.  This is called the male end.  We can now push the male end in to the female Eindor.  The Eindor ends are held together via friction and again these are now 6 bar rated.  

The reason Eindor fittings are so adaptable is because we can plug in and plug out if ever we want without damaging either the 6mm flexible pipe or the LDPE supply pipe.  With a simple plug the area is isolated 




Model Image Item Name Price
MP500610
PVC 6mm O/D 4mm I/D Micro Pipe 25 Metre Roll

PVC 6mm O/D 4mm I/D Micro Pipe 25 Metre Roll

PVC 6mm Micro Pipe A flexible micro pipe  used for distributing water to pots and containers  Used for discreet plant watering Made in Greece  For connecting Micro sprinklers and drippers to main distribution tube 6mm Outside...
£13.20
details
 Sold Out 
TC6MMFILT
6mm - 3/4" BSP threaded Connector Fits Timers and Ouside taps

6mm - 3/4" BSP threaded Connector Fits Timers and Ouside taps

Tap Connector - 6mm Micro Tube With Filter  A threaded adapter 3/4" BSP female thread to 6mm push fit Eindor fitting.  This simple unit will thread on to an outside tap, timer or solenoid valve and allow you to connect the 6mm micro...
£2.77
Add:
1049/0601
Eindor 1/2 Inch Cap - Female Eindor Outlet

Eindor 1/2 Inch Cap - Female Eindor Outlet

Eindor 1/2" Female BSP Cap - Female Eindor Fitting Converts vibro spin mini spin and mini foggers to 1/2 inch thread for stakes etc Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm water...
£0.73
Add:
CPAL10491006
Eindor 1/2 Inch Cap Male Outlet

Eindor 1/2 Inch Cap Male Outlet

Eindor 1/2 Inch Cap Male Outlet  Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm water pipe.  As a general rule the 6mm pipe can be run in lengths up to 20 metres before the pressure...
£0.88
Add:
EinM
Eindor 1/2 inch Male Adaptor

Eindor 1/2 inch Male Adaptor

6mm Eindor Female Outlet to Male 1/2" BSP Thread  This Eindor fitting is often used on stakes or other items to raise certain makes of sprinkler above the plants.   Eindor fittings are a simple to use push fit adapters to route the...
£0.44
Add:
CPAL10490602
Eindor 3/4 Inch Cap - Female Outlet

Eindor 3/4 Inch Cap - Female Outlet

  Eindor 3/4 Inch Cap - Female Outlet   Converts vibro spin mini spin and mini foggers to 3/4 inch thread for stakes etc Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm water pipe.  As...
£0.60
Add:
CPAL30591004
Eindor Barbed Blanking Plug To Stop 3-4mm Hole

Eindor Barbed Blanking Plug To Stop 3-4mm Hole

Eindor PLug For 3-4 mm Holes    The blanking plug is used to plug holes up to 4mm in LDPE pipe work.  This could be a damaged pipe or when a fitting is remopved from the LDPE supply pipe and this will block up the hole  6 bar...
£0.13
Add:
CPAL30591006
Eindor Barbed Blanking Plug To Stop 5-6mm Holes

Eindor Barbed Blanking Plug To Stop 5-6mm Holes

Eindor Plug For 5-6 mm Holes    The blanking plug is used to plug holes up to 6mm in LDPE pipe work.  This could be a damaged pipe or when a fitting is remopved from the LDPE supply pipe and this will block up the hole  6 bar...
£0.12
Add:
CPAL30560606
Eindor Barbed Collar 6mm - Eindor Male

Eindor Barbed Collar 6mm - Eindor Male

Eindor Male Connector - 6mm Flexible outside diameter pipe Eindor fittings are quite unique in how they fit together.   Eindor fittings have a male and a female end.  When the male end is pushed inside the female end it forms a...
£0.10
Add:
KECAP
Eindor Blanking Cap For Male End

Eindor Blanking Cap For Male End

Eindor Blanking Cap For Male Eindor End    This cap can be used to cap off the male end of an Eindor Fitting.  The cap is pushed over the end of the fitting and makes a friction fit.  Once fitted the cap is rated to 4 bar and can...
£0.10
Add:
CPAL30581006
Eindor Blanking Plug Male Fits Female Eindor

Eindor Blanking Plug Male Fits Female Eindor

Eindor Blanking Cap Fits Female Eindor  This simple plug fits inside the female Eindor fitting.  The plug is used to stop off when drip or spray areas are not being used  Simple to use and very quick to remove when the fitting is...
£0.15
Add:
CPAL30610606
Eindor Female Connector Will Join Male Ends Together

Eindor Female Connector Will Join Male Ends Together

Eindor Female Connector    This connection will join the male Eindor ends together.  This friction fit fitting makes working with micro pipe simple and above all flexible  6 bar rated  Friction fit  Made in the EU 
£0.15
Add:
C30620606
Eindor Male Joiner Will Join Female Ends Together

Eindor Male Joiner Will Join Female Ends Together

Eindor Double Joiner To Join To Female Eindor Fittings Together  This simple joint can be used to extend 6mm pipe without removing the Eindor Fitting 
£0.20
Add:
CPAL30630606
Eindor Mini Tap 1 Male End 1 Female End

Eindor Mini Tap 1 Male End 1 Female End

Eindor Mini Tap 1 End Male 1 End Female  The Eindor mini tap is ideal regulating flow or shutting off areas.  The tap is made in Greece from the highest quality materials making this i a durable irrigation product.  The ends are set...
£0.80
Add:
KEM
Eindor Nozzle Adapter

Eindor Nozzle Adapter

Eindor Nozzle Adapter   6mm F outlet Adapts Vibro-spin, Mini-spin, Mini-fogger nozzles to 1/2" F thread. Eindor fittings are a simple to use push fit adapters to route the 6mm water pipe. As a general rule the 6mm pipe can be run in...
£0.60
Add:
CPAL40680666
Eindor Tee 6mm Female Ends

Eindor Tee 6mm Female Ends

Eindor Tee Female Ends   Eindor Tees are probably not used very often in the domestic garden. The Tee will accept the female ends and once inserted they will withstand pressures up to 90 psi. If you are looking to Tee 6mm pipe then we would...
£0.36
Add:
E881003
Punch Pliers 16/20mm Pipe 3mm

Punch Pliers 16/20mm Pipe 3mm

Punch pliers for pipe 16/20mm The punch pliers are normally for large installation that require many 100's of holes to be punched in to either 16 or 20mm LDPE Pipe.  For smaller or domestic jobs please see the budget hand punch as this is...
£16.90
Add:
CPAL30530008
Eindor Stake Head 8mm Stake

Eindor Stake Head 8mm Stake

Eindor Stake Head 8mm Stake For 8mm outside diameter stakes Allows 6mm male sprinklers to be attached to stakes Use with Endor Stake Pressure tested to 90psi Push on to the Stake and then push one end of the eindor lead in to the bottom and then...
£0.15
Add:
C30510840
Eindor 40cm Stake

Eindor 40cm Stake

Eindor 40cm Stake The 40 cm stake will take the Pal stable sprayer directly or the Vibram sprayer with a stake head adaptor  Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm water pipe. As a...
£0.65
Add:
PAL30510850
Eindor 50cm Stake

Eindor 50cm Stake

50cm Stake Suitable for Use With Bed Sprayers Using Eindor Fittings    The Eindor compatible stake is available in either 40 or 50cm in height.  The stake can be used with Eindor compatible fittings which include the pal sprayer....
£1.24
Add:
PAL30520080
Eindor 6 mm Connection Tubing 80cm Length

Eindor 6 mm Connection Tubing 80cm Length

Eindor Connection Tubing 80cm Length Connects stake head to header or supply tube 80cm long with Eindor Barbed Collar either end use with Eindor plunger Pressure tested to 90psi Eindor fittings are a simple to use push fit adapters to route the 6mm...
£0.79
Add:
CPAL30540006
Eindor Barbed Fitting to Eindor Female End

Eindor Barbed Fitting to Eindor Female End

Eindor 6mm Pipe Adapter to Eindor Fitting  The Eindor pipe adapter is used to insert in to the LDPE supply pipe. The barbed section is broader and the Eindor end is a female Eindor. You would punch a 3mm hole using a pipe punch in to the LDPE...
£0.22
Add:
CPAL30640037
Micro Pipe Support Stakes 4 - 7 mm (Pack of 10)

Micro Pipe Support Stakes 4 - 7 mm (Pack of 10)

Micro Pipe Support Stakes 4 - 7 mm (Pack of 10) For holding 4 - 7 mm micro pipe in place along beds, also use for holding drippers in place in baskets or containers. Height - 15cms
£2.19
Add:
CPC6
Pipe Clip 6mm (Pack 25)

Pipe Clip 6mm (Pack 25)

Pipe Clip 6mm Plastic 6mm pipe clip with masonry nail.  Ideal for secoring the 6 mm drip pipe to fences, walls etc   
£2.13
Add: