Your cart is empty.

Cards Accepted

VisaMasterCard / MasterCard DebitVisa DebitMaestroVisa Electron (UKE)CEON_SAGE_PAY_FORM_CARDS_ACCEPTED_SIDEBOX_AMEXPayPal
 
PayPal
 
Verified By Visa MasterCard SecureCode
 
Secured by Sage Pay
 
Card payment processing powered by Ceon software

Hunter Pro-HC 6 Zone With 4 Zone Manifold Complete


Hunter  Pro-HC 6 Zone Watering Kit Complete Ready Wired ( Plug And Play) 4 Zone manifold 

This is a complete kit that has been ready assembled and can be used straight from the box. 

This is complete and will be very simple to instal.  The control unit can be be installed in or outside. The manifold can be installed inside or outside, above or below ground. The manifold and valves are ready to go and are wired in ready for use. The Manifold can be screwed to a wall, shed or any other location including underground.  The low voltage 24 volt ac lead can then be clipped  to the Hunter main control unit which can be installed anywhere as long as it can be plugged in to the mains.  Once installed it is just a simple job to connect the control unit to the mains and wire the voltage leads in to the 5 terminals inside the control unit.  Installation should take less than 1 hour and once installed the unit is ready to use.  All the products are commercial grade and will give many, many years of service. 

The control unit can then be programmed with multiple groups, multiple starts per day, indeed the sky is the limit with this brand leading control unit which is only fractionally more than many cheaper battery powered control units.  Plus the unit is ultra reliable. 

The kit list below looks a bit confusing however it is all pre-fitted so that you have 2 items in the box ( 1 control unit and 1 valve assembly pre wired)

Kit includes

1 Hunter Pro- HC mains Powered Control Unit.  WIFI enabled can be monitored/programmed from any location with Internet access Worldwide with a smart phone, tablet or PC 

2 4 way manifold

1 1" stopend.  If you ever want to extend the unit this can be removed and more valves added

1 5 metre roll of 6 core cable valve end pre wired with waterproof connectors. 

4 Solenoid valves

4 1" threaded nipples

41" - 3/4" nipples

1 1" - 3/4" thread adapter

1 3/4" male quick release hose connector installed although can be removed

8 waterproof connectors for valves pre used in the wiring of the valves

2 manifold wall clips

  • Model: HUPROHC4ZM
  • Shipping Weight: 5lbs
  • 3 Units in Stock
  • Manufactured by: Hunter

Be the first to write a review.  Write a Review.

This product was added to our catalog on Wednesday 06 December, 2017.