Bermad Manifold Solenoid Valve 1" BSP Male Thread Inlet Outlet 1" BSP Female Thread
This is a manifold valve and is used when space is an issue. Each valve can be threaded together to form a chain. The water flows from the male thread straight through the valve exiting via the female thread. When power is supplied to the valve the valve will open and allow water to flow out of the bottom female outlet and so activate the watering zone. This forms a very neat installation with compact features allowing many valves to be installed in a valve box.
- Saves space keeping watering control compact
- Easy to remove via female swivels should valves ever need servicing
- Very quick to instal Fast DIY assembly as no tools are needed
- As with all Bermad components very long lasting
- Reliable performance Cost effective as enables tight control over water flow and usage
- Compatible with most 24 vac controllers
- Body and cover are made from reinforced Nylon
- Metal parts are stainless steel
- rated up to 10 bar pressure
- Flow range from 0.01 - 3 cubic metres per hour
- max flow 8.8 cubic metres per hour pressure loss at this flow rate 1.2 bar
- length 125mm
- height 136mm
- width 80mm
- compatible with dc latching solenoids
- Model: BER32L0524AC
- 20 Units in Stock
- Manufactured by: Bermad
Be the first to write a review. Write a Review.