PVC Connector 32 or 40 mm Glue - 1" Male Thread 16 Bar Rated ( The Glue Fitting takes 40 mm with a 40 mm straight connector or 32mm on the inside
VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems.
PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available in many sizes these fittings offer a comprehensive alternative in area that will benefit from a more rigid pipe installation normally above ground installation however PVC is very suitable for below ground
PVC pipe fittings are suitable for
- Chemical installations
- Portable water applications
- Foodstuff industries
- Swimming pools
- Irrigation
PVC fittings are not suitable for compressed air pipelines
| D1 | D2 | D3 | Z | B | C | D | S | PN |
|---|---|---|---|---|---|---|---|---|
| 32mm | 40mm | 1"M | 11mm | 22mm | 22mm | 21mm | 46mm | 16mm |
- Model: C802333
- Shipping Weight: 0.015lbs
- 50 Units in Stock
- Manufactured by: VDL
Be the first to write a review. Write a Review.