Your cart is empty.

Cards Accepted

VisaMasterCard / MasterCard DebitVisa DebitMaestroVisa Electron (UKE)CEON_SAGE_PAY_FORM_CARDS_ACCEPTED_SIDEBOX_AMEXPayPal
 
PayPal
 
Verified By Visa MasterCard SecureCode
 
Secured by Sage Pay
 
Card payment processing powered by Ceon software
Large Area Watering

20mm Barbed Fittings

20 mm Barbed Push Fit Water Fittings

 

Push fit barbed fittings are suitable for surface installation for systems running up to 4 bar pressure.  The fittings work with the LDPE low pressure pipe and should not be installed in below ground installations.  They are suitable for just below ground installation. 

To install barbed push fit fittings first heat the pipe up using very hot water and push the fitting in to the pipe.  The pipe will shrink back on to the barbs making it near impossible to remove. 

For more information including a short video please click here




Model Image Item Name Price
WP20mm
20mm Black Water Pipe LDPE (4Bar)

20mm Black Water Pipe LDPE (4Bar)

20mm Black LDPE Water Pipe  LDPE is a thin walled pipe suitable for above ground or just below ground level installation.  If you are installing water pipe underground then you should use an MDPE pipe.  The pipe is ideal for...
details
3321/2001
Barbed 20 mm - 1/2" Male BSP Threaded Connector

Barbed 20 mm - 1/2" Male BSP Threaded Connector

Barbed 20mm - 1/2" BSP Male threaded connector The Palaplast Straight connector to a half inch male BSP thread is an an ideal choice for use with LDPE water pipe.  The fitting is very strong and will resist water pressure up to 6 bar when...
Qty Discounts Off Price
1-9
£0.39
10-19
£0.35
20-49
£0.33
50-99
£0.31
100+
£0.29
£0.39
Add:
3102/2020
Barbed Elbow Joint 20mm

Barbed Elbow Joint 20mm

Barbed Elbow 20 mm Barbed elbow joint 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe.  Installation is simple providing the...
Qty Discounts Off Price
1-9
£0.39
10-19
£0.35
20-99
£0.33
100+
£0.31
£0.39
Add:
3106/0020
Barbed Stopend 20mm

Barbed Stopend 20mm

Barbed Stopend 20mm  Barbed Stop End t 20 mm is suitable for use with LDPE 20 mm outside diameter pipe. Once fitted the joint is pressure rated to 6 bar because of its sharp barbs and tight fit to the pipe.  Installation is simple...
Qty Discounts Off Price
1-9
£0.27
10-19
£0.24
20-99
£0.23
100+
£0.22
£0.27
Add:
3180/0201
Barbed Tee 20 mm Branch 1/2" Male Thread

Barbed Tee 20 mm Branch 1/2" Male Thread

Barbed 20mm Tee With 1/2" BSP Male Threaded Branch The barbed Tee is ideal for connecting equipment or changing pipe diameters on long runs.  The fitting is made in the EU using accurate manufacturing techniques making this an ideal...
Qty Discounts Off Price
1-9
£0.65
10-19
£0.59
20-49
£0.55
50-99
£0.52
100+
£0.49
£0.65
Add:
Z2447C
Tavlit Tap 20 mm - 1/2" Male BSP Thread

Tavlit Tap 20 mm - 1/2" Male BSP Thread

This is a high grade heavy duty push fit fitting suitable for 20 mm external diameter LDPE PIpe .   Tavlit fittings are more expensive than the standard fitting however they are made to a much higher standard and so are more resistant to damage...
Qty Discounts Off Price
1-9
£2.49
10-19
£2.24
20-49
£2.12
50-99
£1.99
100+
£1.87
£2.49
Add:
3100/2020
Barbed Straight Connector 20mm

Barbed Straight Connector 20mm

Barbed Straight Connector 20mm  Barbed straight connector used to join supply tubes together for long runs or to repair the pipe if it gets damaged Easy simple push fit installation Important note for runs over 50 metres please call for advice...
Qty Discounts Off Price
1-9
£0.29
10-19
£0.26
20-99
£0.25
100+
£0.23
£0.29
Add:
3103/2020
Barbed Tee Joint 20mm

Barbed Tee Joint 20mm

Barbed Tee Joint 20mm    Barbed T joint used to supply water to beds and borders Easy simple push fit installation Important note for runs over 50 metres please call for advice as a 20mm supply tube could be more suitable These barbed...
Qty Discounts Off Price
1-9
£0.29
10-19
£0.26
20-99
£0.25
100+
£0.23
£0.29
Add:
3101/2016
Push Fit Reducer 20 - 16mm

Push Fit Reducer 20 - 16mm

Barbed Reducing Straight Connector 20mm - 16mm  Used to reduce 20mm LDPE outside diameter pipe to 16mm.  This is ideal when you are using long runs of pipe. Using 20mm pipe over long runs will make sure that you loose as little water flow...
Qty Discounts Off Price
1-9
£0.39
10-19
£0.35
20-49
£0.33
50-99
£0.31
100+
£0.29
£0.39
Add:
3213/0202
Barbed 20mm Supply Tube To Standard 3/4 " Threaded Tap Connector

Barbed 20mm Supply Tube To Standard 3/4 " Threaded Tap Connector

20mm - 3/4" Swivel Connector Female Thread The 20 mm - 3/4" female threaded swivel tap connector is ideal for connecting 20mm pipe to any outside tap or timer.  The connector can be used to connect 20 mm pipe to solenoid valves and...
Qty Discounts Off Price
1-9
£0.89
10-19
£0.80
20-49
£0.76
50+
£0.71
£0.89
Add:
3321/2002
Barbed Push Fit Connector 20mm 3/4" male

Barbed Push Fit Connector 20mm 3/4" male

Barbed Push Fit Straight Coupling  20mm - 3/4" male bsp thread This is a high grade fitting suitable for use with 20 mm LDPE water pipe.  The sharp barbs make sure the fitting stays in the pipe even in pressures up to 6...
Qty Discounts Off Price
1-9
£0.44
10-19
£0.40
20-49
£0.37
50-99
£0.35
100+
£0.33
£0.44
Add:
3180/0202
Barbed Push Fit Tee 20mm Branch 3/4" Male Thread

Barbed Push Fit Tee 20mm Branch 3/4" Male Thread

Barbed Push Fit Tee 20mm x20mm x 3/4" Male BSP Thread The barbed male Tee to 20mm push fit barbs are used exclusively with LDPE pipe.  This is a thinner walled pipe than the MDPE which is used underground and should be used with...
Qty Discounts Off Price
1-9
£0.61
10-19
£0.55
20-49
£0.52
50-99
£0.49
100+
£0.46
£0.61
Add:
3121/0020
Foldover Stopend 20mm

Foldover Stopend 20mm

20 mm Foldover Stopend The foldover stopend is probably the most positive stopend available for 20mm LDPE pipe when using a push fit system.  Foldover stopends are quicker to use than the push fit end stops plus they are more reliable as they...
Qty Discounts Off Price
1-9
£0.18
10-19
£0.16
20-99
£0.15
100+
£0.14
£0.18
Add:
3104/2016
Reducing Tee 20mm x 20mm x 16mm Branch

Reducing Tee 20mm x 20mm x 16mm Branch

Reducing Push Fit Tee 20mm x20mm x16mm  Can be used with any LDPE 20mm or 16mm.   The connector is made from a strong industrial grade UV stabilsed plastic.  The connector can be used on any thin walled pipe like LDPE water pipe or...
Qty Discounts Off Price
1-9
£0.55
10-19
£0.49
20-49
£0.47
50-99
£0.44
100+
£0.41
£0.55
Add:
3182/0201
Barbed 20mm Elbow - 1/2 Inch Bsp Thread

Barbed 20mm Elbow - 1/2 Inch Bsp Thread

Barbed 20mm Elbow - 1/2 Inch Bsp Thread    Quick and simple installation These barbed fittings are available in varies sizes depending on the length of the run from the water source.  We have found that for most domestic...
Qty Discounts Off Price
1-9
£0.49
10-19
£0.44
20-49
£0.42
50+
£0.39
£0.49
Add:
3182/0202
Barbed 20mm Elbow - 3/4 Inch Bsp Thread

Barbed 20mm Elbow - 3/4 Inch Bsp Thread

Barbed 20mm Elbow - 3/4 Inch Bsp Thread   Quick and simple installation Important note for runs over 50 metres please call for advice as a 20mm supply tube could be more suitable These barbed fittings are available in varies sizes depending on...
Qty Discounts Off Price
1-9
£0.52
10-19
£0.47
20-49
£0.44
50+
£0.42
£0.52
Add:
3112/1620
Techline 16mm - 20 mm Pipe Stake

Techline 16mm - 20 mm Pipe Stake

Pipe Pegs For 16 Or 20 mm Pipes Used to stake down pipes in the garden making installation a lot easier .  Can be used on both 16 and 20 mm low or high water pressure pipe including PVC water pipe if needed.  We would suggest that you will...
Qty Discounts Off Price
1-9
£0.39
10-99
£0.37
100-799
£0.31
800+
£0.27
£0.39
Add:
3161/0220
20mm Barbed - 3/4 inch Bsp Threaded Control Valve

20mm Barbed - 3/4 inch Bsp Threaded Control Valve

20mm - 3/4" Male BSP Thread Control Valve This is  a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned.  It is ideal product to use with LDPE as the sharp barb form a permanent...
Qty Discounts Off Price
1-9
£1.69
10-19
£1.52
20-49
£1.44
50+
£1.35
£1.69
Add:
3157/2020
Barbed 20mm Control Valve

Barbed 20mm Control Valve

20 mm Barbed Control Valve This is  a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned.  It is ideal product to use with LDPE as the sharp barb form a permanent secure attachment. ...
Qty Discounts Off Price
1-9
£1.49
10-19
£1.34
20-49
£1.27
50+
£1.19
£1.49
Add:
3156/0202
Barbed Valve 3/4 - 3/4 male Thread

Barbed Valve 3/4 - 3/4 male Thread

his is  a simple 90 degree turn on off control valve that can restrict flow based on how far the lever is turned.  The valve is finished on both ends with a standard 3/4" male BSP thread so that this valve can be used with numerous...
Qty Discounts Off Price
1-4
£1.79
5-19
£1.61
20-49
£1.52
50-99
£1.43
100+
£1.34
£1.79
Add:
Z2518
Tavlit Push Fit 3 Way Connector 20mm - 3/4" BSP

Tavlit Push Fit 3 Way Connector 20mm - 3/4" BSP

Tavlit Push Fit 3 way Connector 20mm - 3/4" This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe.   Tavlit fittings are more expensive than the standard fitting however they are made to a...
Qty Discounts Off Price
1-9
£1.49
10-19
£1.34
20-49
£1.27
50-99
£1.19
100+
£1.12
£1.49
Add:
Z2528
Tavlit Push Fit 3 Way Connector 20mm- 3/4"

Tavlit Push Fit 3 Way Connector 20mm- 3/4"

Tavlit Push Fit 3 way Connector 20mm - 3/4" This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe.   Tavlit fittings are more expensive than the standard fitting however they are made to a...
Qty Discounts Off Price
1-9
£2.89
10-19
£2.60
20-49
£2.46
50-99
£2.31
100+
£2.17
£2.89
Add:
Z2533
Tavlit Push Fit 4 Way Connector 20mm - 3/4" Female Thread

Tavlit Push Fit 4 Way Connector 20mm - 3/4" Female Thread

Tavlit Push Fit 4 way Connector 20mm - 3/4" Female Thread This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe.   Tavlit fittings are more expensive than the standard fitting however they...
Qty Discounts Off Price
1-9
£2.89
10-19
£2.60
20-49
£2.46
50-99
£2.31
100+
£2.17
£2.89
Add:
Z2538
Tavlit Push Fit 6 way Connector 20mm - 3/4" Female Thread

Tavlit Push Fit 6 way Connector 20mm - 3/4" Female Thread

Tavlit Push Fit 6 way Connector 20mm - 3/4" Female Thread T This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe.   Tavlit fittings are more expensive than the standard fitting however...
Qty Discounts Off Price
1-9
£3.49
10-19
£3.14
20-49
£2.97
50-99
£2.79
100+
£2.62
£3.49
Add:
Z2513
Tavlit Push Fit Y Piece 20mm - 3/4" BSP

Tavlit Push Fit Y Piece 20mm - 3/4" BSP

Tavlit Push Fit Y Connector 20mm - 3/4"   This is a high grade heavy duty push fit fitting suitable for use with 20mm outside diameter LDPE pipe.   Tavlit fittings are more expensive than the standard fitting however they are made to...
Qty Discounts Off Price
1-9
£1.39
10-19
£1.25
20-49
£1.18
50-99
£1.11
100+
£1.04
£1.39
Add:
PC20
Pipe Clip 20mm (Pack 25)

Pipe Clip 20mm (Pack 25)

Pipe Clip 20mm Plastic 20mm pipe clip with masonry nail Pack of 25 clips 
Qty Discounts Off Price
1-3
£4.20
4-7
£3.78
8-11
£3.57
12+
£3.36
£4.20
Add:
77300-104035
VDL Pipe Bracket 20mm

VDL Pipe Bracket 20mm

VDL Pipe Clip For 20mm Outside Diameter Pipe The VDL pipe clamp is a very strong pipe clip with tough jaws that grip the pipe once it is inserted.  Indeed the grip is so positive that once fitted it is very hard to remove the pipe once...
Qty Discounts Off Price
1-9
£0.47
10-19
£0.42
20-49
£0.40
50+
£0.38
£0.47
Add:
3101/2012
Push Fit Reducer 20 - 12mm Per 100

Push Fit Reducer 20 - 12mm Per 100

Barbed Reducing Straight Connector 20mm - 12mm  Used to reduce 20mm LDPE outside diameter pipe to 16mm.  This is ideal when you are using long runs of pipe. Using 20mm pipe over long runs will make sure that you loose as little water flow...
£39.00
Add: