Your cart is empty.

Cards Accepted

VisaMasterCard / MasterCard DebitVisa DebitMaestroVisa Electron (UKE)CEON_SAGE_PAY_FORM_CARDS_ACCEPTED_SIDEBOX_AMEXPayPal
 
PayPal
 
Verified By Visa MasterCard SecureCode
 
Secured by Sage Pay
 
Card payment processing powered by Ceon software

Netfim Coolnet Foggers Misting

Netafim Coolnet Foggers 

Whether you are looking to cool or humidify greenhouses and livestock, or to maximize rooting efficiency, CoolNet Pro™ super-fine mister provides a perfectly uniform, drip-free solution – even at relatively low pressures.

 

  • HIGHLY EFFICIENT COOLING AND HUMIDIFICATION: Reduce temperatures by up to 5 degrees across your greenhouse or net house with perfectly uniform distribution of micro-sized droplets
  • LOW PRESSURE REQUIREMENTS: Get great performance and fine droplets of 65 microns at relatively low pressure of 4.0 bar.
  • AVOID PLANT DANAGE: “Bridge” free design and integral anti-drain valve prevents plant-damaging drip-off.
  • SUITABLE FOR PULSE ACTIVATION: Anti-drain valve ensures system is always full and ready, allowing high-frequency operation in short pulses.
  • EASY MAINTENANCE: Simple disassembly without tools, enables fast and simple cleaning - saving time and labor.
  • EFFECTIVE CLEANING: Made fromchemical-resistant materials (AA) that enable system flushing with acid treatments.

APPLICATIONS Super-fine static mister especially designed for cooling and humidifying greenhouses and livestock, and for irrigating over rooting tables. SPECIFICATIONS

■ Bridgeless design.

■ Static mister, 3 different flow rates: 5.5, 7.5, 14.0 l/h and a plugged nozzle. Nominal flow rates at 4.0 bar pressure.

■ Pressure range 3.0 - 5.0 bar.

■ Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydro-cyclone filter is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team's instructions.

■ Inlet connector: Press fit

■ 3 different configurations: Cross, 4 nozzles "T" , 2 nozzles Straight, 1 nozzle

■ The nozzles are code color colored: 5.5 l/h Light Green 7.5 l/h Silver Gray 14.0 l/h Sky Blue Plugged nozzle: Orange FEATURES AND BENEFITS

■ Bridgeless design eliminates dripping.

■ Interchangeable components.

■ Acid resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system can be cleaned by application of suitable acid treatments.

■ Micro sized droplets, at a relatively low pressure of 4.0 bar the CoolNet™ Pro uniformly distributes an average drop size of 65 micron.

■ Specially designed for cooling, humidifying and rooting tables.

■ Strongly recommended to connect the CoolNet™ Pro to the distribution pipe with a SSPE (super soft PE) micro-tube, a specifically designed stabilizer and AD valve (anti-drain) that will prevent distribution pipe drainage




Model Image Item Name Price
PAL30660006
Straight Coupling 6mm To Supply Tube

Straight Coupling 6mm To Supply Tube

Straight Coupling 6mm To Supply Tube    Used to connect 6mm micro tube - 16 or 20mm pipe Use with 3mm hole punch  
£0.08
Add:
Z3651A
Coolnet Fogger 4 Outlet 5.5 LPH

Coolnet Fogger 4 Outlet 5.5 LPH

C oolnet Fogger 4 Outlet  The coolnet fogger cross is the most used.  The spray is 50 microns so ideal for cooling greenhouses or for increasing the humidity in the greenhouse  Coolnet Foggers will keep conditions in your...
£1.81
Add:
Z3656
Coolnet Fogger Tee 2 x 5.5 lph

Coolnet Fogger Tee 2 x 5.5 lph

Coolnet Fogger Tee The coolnet Fogger is probably the best mistig nozzle available.   The nozzle produces a 50 micron spray which is ideal for cooling greenhouses, increasing the humidity and comfortable for livestock if used for animal...
£1.29
Add:
631000401000
MistNet Single Outlet Nozzle

MistNet Single Outlet Nozzle

Mistnet Single Outlet Nozzle  APPLICATIONS Fine static mister especially designed for under canopy cooling and humidifying greenhouses. SPECIFICATIONS ■ Bridgeless design eliminates dripping. ■ Static mister, 2 flow rates: 15, 25 l/h....
£0.74
Add:
PAL881003
Punch Pliers 16/20mm Pipe 3mm

Punch Pliers 16/20mm Pipe 3mm

Punch pliers for pipe 16/20mm The punch pliers are normally for large installation that require many 100's of holes to be punched in to either 16 or 20mm LDPE Pipe.  For smaller or domestic jobs please see the budget hand punch as this is...
£11.28
Add:
1054/0038
Eindor Sprinkler Adapter 3/8" W Thread (Pack 10)

Eindor Sprinkler Adapter 3/8" W Thread (Pack 10)

Eindor Sprinkler Adapter 3/8" W Thread (Pack 10) Adapts Vibro-Spin, Mini-Fogger and Mini-Spin Sprinkler heads to 3/8" W threads 6 mm female outlet  
£2.49
Add:
KEPT
Eindor Threaded Plunger 1/4" W (Pack 10)

Eindor Threaded Plunger 1/4" W (Pack 10)

Eindor Threaded Plunger 1/4" W (Pack 10) Adapts Vibro-Spin, Mini-Fogger and Mini-Spin sprinklers to Evenproducts white insert 6mm Female outlet
£1.99
Add:
KEPM
Sprinkler Adapter to M11 Thread (Pack 10)

Sprinkler Adapter to M11 Thread (Pack 10)

Sprinkler Adapter to M11 Thread (Pack 10) Adapts Vibro-Spin, Mini-Fogger and Mini-Spin Sprinkler heads to M11 threads 6 mm female outlet
£2.59
Add:
PAL10680034
Budget Hand Punch

Budget Hand Punch

Budget hand punch The budget hand punched is used to punch a hole in the main supply tube which is either 16 or 20mm in diameter so that thedripper can be inserted and then the micro pipe attached to the end of the dripper     Hole...
£0.62
Add:
PAL30540006
Eindor Barbed Fitting to Eindor Female End

Eindor Barbed Fitting to Eindor Female End

Eindor 6mm Pipe Adapter to Eindor Fitting  The Eindor pipe adapter is used to insert in to the LDPE supply pipe. The barbed section is broader and the Eindor end is a female Eindor. You would punch a 3mm hole using a pipe punch in to the LDPE...
£0.13
Add: