Your cart is empty.

Cards Accepted

VisaMasterCard / MasterCard DebitVisa DebitMaestroVisa Electron (UKE)CEON_SAGE_PAY_FORM_CARDS_ACCEPTED_SIDEBOX_AMEXPayPal
 
PayPal
 
Verified By Visa MasterCard SecureCode
 
Secured by Sage Pay
 
Card payment processing powered by Ceon software

Hunter X-Core 4 Zone Outdoor Control Unit


Hunter X-Core Mains Powered Control Unit For Indoor Or Outdoor Use 4 zones

This is probably the most versatile and simple irrigation control unit.  The X-core is a very simple unit to install and even easier to use.  The unit uses a  safe industry standard output voltage of 24 volt ac so that the industry standard control valves. 

 

Key Features

  • 4 separate zones can be watered independently
  • Mains powered  simple to connect to the mains via a standard plug outlet
  • Can be installed in or outside The outside case is designed to protect the unit from all weather conditions
  • 3 independent programs each zone or valve can be added  to each program extending the start times for each valve
  • Up to 4 start times per program Each program can have a separate start time making this one of the most versatile cost effective control units
  • Maximum run times 4 hours This is more then enough howevver if you need to run a zone for more than 4 hours you can simply add it in to more programs giving each zone the option for up to 12 hours watering in any 24 hour period. 
  • Backup memory The memory is backed up and protected during power cuts etc
  • Automatic short circuit protection.  Just in case you touch the wrong leads to the low voltage output the short circuit protection protects all the compnebnts without the need of a fuse
  • Quick check facility allows you to check your wiring for faults
  • Programmable delay between stations.  If you are using a water tank and need to program a delay between zones so that the tank can refill. 
  • Solar sync compatible The X-core is compatible with the Hunter solar sync.  Unlike the rain sensor the Solarsync measures the sun and rain in your garden and adjust the watering times based on this information
  • Pump start This sends a signal to the pump solenoid telling the pump to start
  • Master valve.  Some system require a master valve near the water supply to prevent siphoning of the system.  This unit has the facility to operate this valve
  • 2 year warranty

 

Specifications

  • Input voltage 230/240volts ac
  • Transformer output 24 VAC 1 am
  • Station output 24 vac 0.56amp
  • Pump/Master valve output 245 vac 0.28 amp
  • sensor inputs = 1
  • Operating temp 0 - 140 Fahrenheit

For the instructions manual please click here 

  • Model: HCXCO04
  • Shipping Weight: 1.5lbs
  • 11 Units in Stock
  • Manufactured by: Hunter

Be the first to write a review.  Write a Review.

This product was added to our catalog on Monday 25 April, 2016.