Model Image
Item Name Price
C804453
PVC Reducing Elbow 90 Degrees 1 bar 50mm Glue 32mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£2.55
Add:
C807633
PVC Union 32mm Glue - 1" Female Thread 10 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and...
£6.32
Add:
C807833
PVC Union 32mm Glue - 1" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£6.32
Add:
C807433
PVC Union 32mm Glue 16 Bar VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available...
£6.32
Add:
C806733
PVC End Cap 32mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. Available in...
£1.19
Add:
C806233
PVC Equal Crosses 16 Bar Pressure 32mm Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£5.50
Add:
C803643
PVC Tee Male Threaded With Glue Branch 1/4" Bsp x 11/4" BSP and then branch 32mm Glue VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water...
£1.57
Add:
C803933
PVC Tee With Female Threaded Branch 10 Bar Rated 32mm x 32mm x 1" Threaded branch VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water...
£3.19
Add:
C250232
Single Union Lever Ball Valve 32 mm Glue - Glue Used to control individual zones in a rigid PVC system. Suitable for above or below ground installation d1 d2 d3 Z1 Z2 C DN PN 32 73 25 55 65 100 25 16 ...
£13.85
Add:
C804833
PVC Elbow 90 Degrees Glue - Female Thread 32mm Outside diameter Pipe - 1" Female Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£2.81
Add:
C804633
PVC Elbow 90 Degrees Glue - Male Thread 32mm Outside diameter Pipe - 1" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£1.66
Add:
C804634
PVC Elbow 90 Degrees Glue - Male Thread 32mm Outside diameter Pipe - 11/4" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£1.29
Add:
C7804632
PVC Elbow 90 Degrees Glue - Male Thread 32mm Outside diameter Pipe - 3/4" Male Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£1.66
Add:
C807233
PVC Socketed Union 3/3 32mm 7.5 Bar Rated An ideal fitting to join lines together if ever they need to be made easilly removable VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are...
£5.06
Add:
C803433
Tee With 45°Branch 32x32x32 16 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are suitable...
£5.98
Add:
C803533
VDL PVC Tee 32mm x 1" BSP Male Branch X 32mm
£2.01
Add:
CSAB814203
SABA PVC Cleaner SABA PVC cleaner is used to remove any oli films or other dirt that may effect the glue welds when using PVC fittings and pipe in high pressure environments. Basic Rules when Using SABA PVC Cleaner 1. Saw the tube at...
£9.83
Add:
CSAB814103
SABA PVC Glue S3 SABA PVC glues are widely used in the agricultural and horticultural market for applications that use a wide variety of PVC Systems. SABA glue are used in the sanitary market for drainage and other such applications. ...
£19.40
Add:
CVDL811329
VDL Adaptor From 25mm Or 32mm PVC Pipe To 16mm MDPE Or LDPE Pipe This is used to convert PVC pipe to Pe pipe. The PVC end will take 25mm pvc straight in to the fitting or it can be used with 32mm PVC but you will require a 32mm Socket...
£1.50
Add:
CVDL811331
VDL Adaptor From 25mm Or 32mm PVC Pipe To 20mm MDPE Or LDPE Pipe This is used to convert PVC pipe to Pe pipe. The PVC end will take 25mm pvc straight in to the fitting or it can be used with 32mm PVC but you will require a 32mm Socket...
£1.50
Add:
C811532
VDL Elbow 32mm PVC - 25mm MDPE or LDPE Pipe
£2.91
details Sold Out
C814725
Weld On Wet R Dry UPVC Cement 250 grams 240 ml Medium bodied, extremely fast setting, low VOC PVC cement for all classes and schedules with interference fit through 6″ (160 mm) diameter, Schedule 80 through 4″ (110 mm) diameter....
£25.07
details Sold Out
C803133
PVC Equal Tee 16 Bar Rated 32mm x 32mm x 32mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and...
£1.28
Add:
C803331
Reducing Tee Branch Reduced 32x32x20 16 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£1.64
Add:
C805733
VDL 45º Swept Elbow 10 Bar Rated 32 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£1.79
Add:
C805740
VDL 45º Swept Elbow 10 Bar Rated 40 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£2.05
Add:
CVDL801431
Threaded PVC Reducing Bush 2X Glue 16 Bar 32mm x 20mm PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage...
£0.89
Add:
C803332
Reducing Tee Branch Reduced 32x32x25 16 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£1.62
Add:
C812533
Conversion Socket From Metric to Imperial Outside Diameter Pipe 32mm Metric to 1" imperial VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications...
£0.89
Add:
CVDL801432
Threaded PVC Reducing Bush 2X Glue 16 Bar 32mm x 25mm PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage industry...
£0.94
Add:
C808123
Tank Connector 25/32mm PVC Pipe 1" Male Thread With Clamp and Washer The VDL tank connector is rated to 16 bar. Made from PVC the fitting can be used for outlets and overflows in most plastic water tanks. The fitting will take 25mm...
£13.14
Add:
C802033
Threaded PVC Socket Glue X Female Thread 10 Bar Rated 32mm x 1" Female Thread VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray...
£2.98
Add:
C803353
Reducing Tee Branch Reduced 50x50x32 10 bar rated VDL PVC injection molded fittings offer a comprehensive range of high quality high pressure PVC fittings. The fittings are suitable for cold water installation KIWA and ATA certified so are...
£2.58
Add:
C808134
Tank Connector 32/40mm PVC Pipe 11/4" Male Thread With Clamp and Washer The VDL tank connector is rated to 16 bar. Made from PVC the fitting can be used for outlets and overflows in most plastic water tanks. The fitting will take...
£14.67
Add:
CVDL806634
VDL Hose Adapter - PVC Pipe This is used to convert 32mm outside diamter PVC pipe to a 11/4" Flexible pipe. The 32mm end fits inside any form of connector, in other words the end has thw same diameter as a 50mm pvc pipe so...
£2.16
Add:
C801453
PVC Reducing Bush 2X Glue 16 Bar 50mm x 32mm VDL is a producer of injection moulded fittingsfor PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.44
Add:
C802323
PVC Connector 25 or 32 mm Glue - 1" Male Thread 16 Bar Rated ( The Glue Fitting takes 32mm on the outside or 25mm on the inside VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable...
£0.91
Add:
PVCP3210
PVC 10 Bar rated Water Pipe 32mm Outside diameter. Wall thickness 1.8mm High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The pipe is suitable...
£3.00
Add:
C805133
PVC Elbow 45 Degrees 32mm Glue Glue 16 bar rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.62
Add:
C804233
PVC Elbow 90 Degrees 16 bar 32mm Glue Glue VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve...
£1.00
Add:
C802331
PVC Connector 32 or 40 mm Glue - 1/2" Male Thread 16 Bar Rated ( The Glue Fitting takes 40 mm with a 40 mm straight connector or 32mm on the inside VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC...
£1.23
Add:
C802332
PVC Connector 32 or 40 mm Glue - 3/4" Male Thread 16 Bar Rated Suitable for 32mm outside diameter pipe or 40mm outside diameter pipe with a socket VDL is a producer of injection molded fittings for PVC and PE pressure pipe...
£0.86
Add:
C805433
VDL 90º Swept Elbow 10 Bar Rated 32 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe...
£2.04
Add:
C802333
PVC Connector 32 or 40 mm Glue - 1" Male Thread 16 Bar Rated ( The Glue Fitting takes 40 mm with a 40 mm straight connector or 32mm on the inside VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC...
£0.87
Add:
C802334
PVC Connector 32 mm Glue - 11/4" Male Thread 16 Bar Rated Suitable for 32mm Outside diameter PVC Pipe VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use...
£0.94
Add:
C801731
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 32mm x 1/2" VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines,...
£1.84
Add:
C800533
PVC Equal Socket 16 Bar Pressure 32mm VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve manifold. ...
£0.68
Add:
C801732
Threaded PVC Threaded Reducing Bush Glue - Thread 16 Bar rated 32mm x 3/4" Female BSPF VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. PVC fittings are suitable to use in many applications including...
£1.84
Add:
C811033
VDL Pipe Clamp 32mm For securing 32mm supply pipe to walls or fences Use round head 8/10 screws With a 5mm screw hole
£0.95
Add:
